• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.268-271
• /
• 2006

Combustion response function of a solid propellant is measured and calculated to study and model the feedback process between acoustic waves and combustion field. Standard Pulsed DB/AB method and related one-dimensional approximate analysis of T-burner are used to obtain the response function at a driving natural frequency. The problems related with simultaneous ignition of propellant samples are also mentioned and treated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.263-266
• /
• 2009

The mainly objectives of this study was a combustion dynamics and instability characteristics in a model gas turbine dump combustor which is the scale down of GE 7FA+e DLN 2.6 gas turbine combustor. Model gas turbine injector has 2-stage swirl vane and it’s reduced 1/3 size of the original one. The shape of plenum and combustor were designed for similar acoustic characteristics. Inlet air was preheated to $200{\sim}400^{\circ}C$. The flow velocity at mixing nozzle was 30 to 75 m/s and equivalent ratio was 0.4 to 1.2. The combustor length was varied for different acoustic characteristics to $375{\sim}700\;mm$. As the result, this research have been show the combustion instability was observed at lower equivalence ratios ($\Phi$ < $0.5{\sim}0.6$) and higher equivalent ratios ($\Phi$ > $1.1{\sim}1.2$).

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.76-80
• /
• 2012

Uni-element preburners using a oxidizer-rich triplex injector have been designed and tested. During combustion tests 1L mode high-frequency instability of 1100 Hz and low-frequency instability of 100 Hz were observed. High-frequency instability has been suppressed by reducing chamber diameter and applying turbulent rings in combustion chamber. Recently, research to reduce low-frequency instability is in progress.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.415-418
• /
• 2011

It is critical to assess the characteristics of flame response to pressure perturbations for the understanding of nonlinear combustion instabilities. Previous studies can be grouped into flame response upon perturbed, fresh air and fuel mixture, and flame response directly perturbed from longitudinal waves. The present study presents experimental methodology for the understanding of the flame response exposed to transverse acoustic waves generated by loud speakers.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.4-4
• /
• 1998

고체 추진제의 비정상적인 연소 현상을 해석하여 연소 불안정을 예측하는 것은 추진시스템의 설계 시 매우 중요하다. 로켓의 비정상 연소 현상을 해석하기 위하여 많은 이론적 연구가 진행되어 왔다. 이론적인 해는 주로 선형 해석의 결과들로 정상 상태에서 발생하는 불안정 현상을 예측하는 데에는 적합하지만 비정상 현상을 설명하기에는 부족하다. 따라서 수치 기법을 이용한 비선형 해석이 수행되어 졌다. 기존의 비정상 연소에 관한 연구들은 일정한 물성치를 사용하고 추진제 내에서의 화학 반응과 복사 열전달 등을 무시하여 추진제의 특성을 단순화 시켜 비정상 해석을 수행하였다. 본 연구에서는 비정상 연소 현상에 대한 비선형 수치 해석을 하려한다. 실험에서 밝혀진 것과 같이 추진제의 물성치를 온도의 함수로 사용하고 응축영역으로의 복사 열전달을 고려하였다.

• Journal of Energy Engineering
• /
• v.13 no.4
• /
• pp.311-318
• /
• 2004

In the present study, the combustion characteristics of methane and hydrogen-supplemented methane as alternative fuels for automotive vehicles were investigated at various hydrogen substitution rate, ignition position and ignition methods in a CVCC. The main results obtained from the study can be summarized as follow. In case of center ignition and neat methane-air mixture, the flame propagation processes are propagated with an elliptical shape, but they are changed an instable elliptical shape flame with very regular cells and higher velocity by increasing the hydrogen supplement rate. In case of side, 0.5R ignition and neat methane-air mixture, the flame propagation processes are propagated with an instable elliptical shape flame, but they are changed from an instable elliptical shape to wedge shape flame with very irregular cells and higher velocity by increasing the hydrogen supplement rate. Although the flame propagation shape with ignition position and ignition devices was not differ, the flame area of MSCDI device was a little larger than it of CDI device at the same time.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.6
• /
• pp.443-449
• /
• 2014

Thermoacoustic (TA) models have been widely used to predict combustion instability characteristics in a gas turbine lean premixed combustor. However, these techniques have shown some limitations in improving the model accuracy related to an over-simplification of the combustion system and flame geometry. Efforts were made in the current study to improve the limitations of the TA models. One strategy was to modify the actual flame location in the model, and another was to consider the heat release distribution through the flames. The modified TA model results show better accuracy in predicting the growth rate of instabilities compared with the previous results.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.2
• /
• pp.44-53
• /
• 2003

A vertical hot-firing test facility was established to carry out the IPPT(Integrated Propulsion Performance Test) and SQT(Stage Qualification Test) of KSR-III(Korea Sounding Rocket-III). The components for actual launcher were mostly used, hence these tests were carried out under the condition of relatively lower safety margin. To perform hot-firing tests with the maximum safety, an engine emergency blockage system was investigated and applied. An emergency blockage system using combustion chamber pressures and acceleration signals was set up to monitor ignition delay and fail, flame out, propellant feeding status, unstable combustion and excessive structural vibration. With such a system, the test safety could be secured by rapid judgement and follow-up measures, which made IPPT and SQT be safely completed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.1
• /
• pp.59-66
• /
• 1998

The combustion instability analysis of solid propellants is generally done by the simplified governing equations for chemically inert condensed phase region with QSHOD assumption. Since the gas phase and surface reaction layer can be more rapidly relaxed to the external perturbations than the condensed phase, these regions are treated as quasi-steady manner in the analysis. In this paper, the classical ZN(Zeldovic-Novozhilov)approach was re-examined with the presence of radiation augmented burning enhancement in the combustion. Also, the surface reaction was assumed to partially absorb the incident radiant heat fluxes and pass the remaining to the chemically inert condensed phase. As a result of the analysis, the burning rate response function was obtained which consists of a pressure response function and a radiation response function. The response function was shown to be able to predict the results of T-burner tests.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.8
• /
• pp.79-86
• /
• 2006

Swirl injector with adjustable backhole length was analyzed to suppress high-frequency combustion instability in Liquid Rocket Engines. In order to analyze the effect of variable backhole injector as an acoustic absorber, backhole injector was regarded as a quarter-wave resonator. As a result of theoretical approaches and acoustic tests, backhole injector with adjustable length could decrease the unstable modes of combustion chamber. And the damping efficiency was estimated by measuring damping rates experimentally.