• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.162-163
• /
• 2001

폴리머를 이용한 광통신 소자는 실리카를 재료로 사용하는 소자와는 달리 고품질의 박막을 얻는 과정이 단순하고, 소자의 제조단가를 줄일 수 있어 많은 주목을 받고 있다 광통신 소자에 응용되는 여러 폴리머 중에서도 폴리이미드는 PMMA (Poly Methyl MethAcrylate) 등 다른 고분자 물질에 비해서 매우 높은 열적 및 환경적 안정성을 가지고 있는 것으로 알려져 있다. 또한 최근에는 폴리이미드가 가지는 단점인 복굴절과 흡수를 낮추기 위하여 불소기 등을 함유한 폴리이미드가 개발되었으며, 굴절률 조정 또한 용이하게 되었다. (중략)

• Journal of Adhesion and Interface
• /
• v.1 no.1
• /
• pp.38-46
• /
• 2000

A novel diamine monomer, containing fluorine and phosphine oxide, bis(3-aminophenyl) 3,5-bis(trifluoromethyl) phenyl phosphine oxide (mDA6FPPO), was prepared via Grignard reaction, and utilized to prepare polyimides with dianhydrides such as PMDA, 6FDA, BTDA or ODPA, by the conventional two-step route; preparation of poly(amic acid), followed by solution imidization. The polyimides were characterized by FT-lR, NMR, DSC and DMA, with intrinsic viscosity, and adhesive properties were also evaluated. A phosphine oxide containing monomer, bis(3-aminophenyl) phenyl phosphine oxide (mDAPPO) a nd a commercial 3,3'-diamino diphenyl sulfone (mDDS) were also used for comparison. The polyimides with mDA6FPPO exhibited high $T_g$, excellent solubility, and good adhesive properties.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.12.2-12.2
• /
• 2009

전자 디스플레이 산업의 중요성과 미래사회에서 요구되는 정보기기로써 유연한 기판을 사용한 소자에 대한 수요가 급격히 증가하고 있으며, 이들 산업에 응용되기 위해서는 저비용, 고생산 공정이 요구되고 있다. 이를 위해 인쇄전자 기술에 대한 연구가 활발히 진행되고 있다. 특히, 금속배선은 모든 소자의 기본이면서 낮은 저항과 높은 신뢰성을 동시에 요구하고 있어 인쇄전자 기술이 해결해야 할 가장 어려운 난제 중의 하나이다. 따라서 본 연구에서는 낮은 저항과 높은 신뢰성을 만족시킬 수 있는 새로운 금속배선 공정으로서 폴리이미드 필름을 초발수 처리한 후 친수 패턴을 하여 전도성 잉크에 함침함으로서 친수 패턴을 따라 금속배선이 이루어 지도록 하는 방법을 제안하고자 한다. 폴리이미드 필름의 표면을 플라즈마 처리하여 표면에 나노돌기를 형성시키고 불소기를 함유한 코팅층을 형성시킴으로써 물에 대한 접촉각이 $150^{\circ}$이상이 되도록 초발수 처리할 수 있었다. 초발수 처리된 폴리이미드 기판에 쉐도우 마스크를 사용하여 UV조사함으로써 조사된 부분만 친수성을 가지는 패턴을 형성하였다. 이렇게 친수 패턴이 제작된 초발수 폴리이미드 유연기판을 실버잉크에 함침함으로써 선폭 $200{\mu}m$를 가지는 금속배선을 형성시켰다. 형성된 금속배선의 단면 형상을 측정하였으며, 열처리를 통하여 비저항이 $30{\mu}{\Omega}$-cm를 얻을 수 있었다. 통상 1회의 함침으로는 금속배선의 두께가 150nm정도로 금속배선으로 사용하기에는 얇아 배선의 두께를 증가시키기 위하여 수 회 함침을 시도하여 $2{\mu}m$의 두께로 증가시킬 수 있었다. 이때 선폭과 선간 간격은 크게 변하지 않고 두께만 증가시킬 수 있었다. 이는 금속배선을 형성한 후에도 폴리이미드 유연기판의 초발수성은 그대로 유지되어 여러번 함침할 때 잉크가 이미 형성된 배선에만 묻게 되어 두께는 증가하나 선폭과 선간 간격은 증가하지 않는 것으로 판단된다. 사용한 실버잉크는 실버의 함량은 10~20wt%인 수계 잉크였다.

• Membrane Journal
• /
• v.17 no.3
• /
• pp.184-190
• /
• 2007

This study reports on the pervaporation separation of a volatile organic compound(VOC), dichloromethane(DCM) from water using fluorinated copolysiloxaneimide membranes. The copolysiloxaneimide membranes were prepared from 4,4'-(hexafluoroisopropylidene)diphthalic anhydride(6FDA) and two diamines(polysiloxane diamine(SIDA), 2-(perfluorohexyl)ethyl-3,5-diaminobenzene(PFDAB)). By varying the ratio of flexible polysiloxane diamine(SIDA)/rigid fluorinated aromatic diamine(PFDAB) from 0/100 to 100/0 mol%, five copolysiloxaneimide membranes were prepared success- fully. The pervaporation properties of DCM/water were examined in terms of two diamine monomer ratio at room temperature and the feed composition of 0.05 wt% in water. It was found that the increase in SIDA content led to high permeation flux and pervaporation selectivity towards DCM by the enhanced sorption/sorption selectivity and diffusion coefficient/diffusion selectivity due to the increased hydrophobicity and fractional free volume.

• Polymer(Korea)
• /
• v.34 no.2
• /
• pp.97-103
• /
• 2010

PMMA was grafted on MWCNT surface in order to prepare conducting film composed of 6FDAbased polyimide/MWCNT. The electrical conductivity of 6FDA-based polyimide/PMMA-g-MWCNT was investigated as a function of PMMA-g-MWCNT content. Dispersion of MWCNT in 6FDA-based polyimide composite film was better than the pristine MWCNT due to the interaction force between PMMA and 6FDA-based polyimide. Electrical conductivity was interpreted by percolation threshold theory. As a result, 6FDA-6FpDA/PMMA-g-MWCNT which have high critical exponents and low critical concentration showed better dispersion than polyimide composite material that contains DABA(diamino benzoic acid).

• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.180-186
• /
• 2021

Fluorinated polyimide has excellent light transmittance and a high optical refractive index, and is useful for producing optical-waveguide phase modulators with low optical loss and low electric power consumption. In this work, an optical-waveguide phase modulator is designed and fabricated based on a high-refractive-index fluorinated polyimide, and its characteristics are measured. An efficient protocol for characterizing the loss components of the optical waveguide is proposed, and the propagation loss of the fabricated polyimide optical waveguide is confirmed to be 0.9 dB/cm. The phase modulator requires 9.1 mW of power for phase change of π, and the response time is 290 μs, which is improved by tenfold compared to a previous demonstration of polymeric phase modulators.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.639-643
• /
• 2021

In this study, fluorinated ethylene propylene (FEP) nanoparticle as an adhesive for fabricating a three-dimensional multilayered microfluidic device was studied. The formation of evenly distributed FEP nanoparticles layer with 3 ㎛ in thickness on substrates was achieved by simple spin coating of FEP dispersion solution at 1500 rpm for 30 s. It is confirmed that FEP nanoparticles transformed into a hydrophobic thin film after thermal treatment at 300 ℃ for 1 hour, and fabricated polyimide film-based microfluidic device using FEP nanoparticle was endured pressure up to 2250 psi. Finally, a three-dimensional multilayered microfluidic device composed of 16 microreactors, which are difficult to fabricate with conventional photolithography, was successfully realized by simple one-step alignment of FEP coated nine polyimide films. The developed three-dimensional multilayered microfluidic device has the potential to be a powerful tool such as high-throughput screening, mass production, parallelization, and large-scale microfluidic integration for various applications in chemistry and biology.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.366-372
• /
• 2019

In this paper, we fabricated a capacitive humidity sensor with an IDT(Interdigitated) electrode using commercial polyimide containing fluorine, and its properties were measured and analyzed. First, in order to analyze the composition of commercial polyimide, EDS analysis was performed after patterning process on a silicon wafer. The area of the humidity sensor was $1.56{\times}1.66mm^2$, and the width of the electrode and the gap between the electrodes were $3{\mu}m$ each. The number of electrodes was 166 and the length of the electrode was 1.294mm for the sensitivity of the sensor. The fabricated sensor showed that the sensitivity was 24 fF/%RH, linearity <${\pm}2.5%RH$ and hysteresis <${\pm}4%RH$. As a result of measuring the capacitance value according to the frequency change, the capacitance vlaue decreased with increasing frequency. Capacitance deviations with 10kHz and 100kHz were measured as 0.3pF on average.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.338-345
• /
• 2015

Poly(phenylene oxide) (PPO) and polyether imide (PEI) were sulfonated and aminated to create sulfonated poly(phenylene oxide) (SPPO) and aminated polyether imide (APEI), respectively. Characterization of the SPPO and APEI were performed via measurements of FTIR, thermogravimetry (TGA), swelling degree, ion exchange capacity (IEC), and ion conductivity. Next, the surfaces of these membranes were modified by surface fluorination at room temperature. The surface fluorinated SPPO and APEI membranes underwent characterization again for the mentioned measurements to determine any differences. The 3 types of bi-polar membranes were prepared by varying the IEC of the APEI at a fixed SPPO IEC value, which were applied to the low and high NaCl concentration of feed solution at the different current density, respectively. The hypochlorite concentration derived from the surface fluorinated membranes was dependent on the IEC of the APEI and ranged from 491 to 692 ppm at $80mA/m^2$. At low current density of $5mA/m^2$, the hypochlorite concentrations ranged from 18 to 28 ppm for the 4 hrs surface fluorinated membranes and their durability increased greatly.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.448-454
• /
• 2012

A poly(amic acid) (PAA) was prepared by reaction of 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) and 2,2-bis[4-(4-aminophenoxy)phenyl]hexafluropropane (BAPP) in N,N-dimethylacetamide (DMAc). The cast films of the synthesized PAA were thermally treated at different temperatures to create polyimide (PI) films. The heat treatment temperature varied between 80 and $230^{\circ}C$ to investigate the imidization index in relation with the solvent evaporation rates. The progress of PAA imidization was examined using a thermogravimetric analyzer (TGA) and a Fourier transform infrared spectroscope (FTIR) at various time and temperature. The experimental results showed that the imidization index was fast at the initial stage in the presence of solvent, DMAc, reaching the final imidization. When the imidization temperature is high over $200^{\circ}C$, the imidization index decreased because the solvent was evaporated too fast.