• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.488-494
• /
• 2014

The purpose of this study is to analyze the association of oral health of the elderly and oral health quality of life. The subjects of this study were 282 participants who received the fluoride application and the scaling service through program targeting elderly people carried out by a public health center located in Gyeongsangbuk-do Province. Data were collected from January 2011 to December 2011. The result of comparing subscale scores of quality of life related to oral health depending on socioeconomic characteristics showed that functional limitation scores were lower as educational level got higher. The result of comparing subscale scores of quality of life related to oral health depending on status of oral health and frequency of tooth brushing showed that quality in functional limitations, physical pain, psychological discomfort, physical disability, psychological disability, social disability and handicap scores were lower as the number of cavities got more. The result of multiple regression analysis to identify the factors affecting the quality of life related to oral health showed that the number of cavities and installation of denture were significant variables. The results of this study showed that there was significant association of oral health status and oral health related quality of life of the elderly. In order to maintain the oral health related quality of life, it is important to keep many number of residual teeth even if a person gets older and to support the installation of dentures if necessary.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.3
• /
• pp.660-677
• /
• 1997

The purpose of this study was to examine the morphological characteristics and combined effects of fluoride application and laser irradiation on artificial caries-like lesion formation in bovine enamel. Enamel specimens were divided into five experiment group and placed in no-treatment(group C), APF application alone(group F), laser irradiation alone(group L), APF application before laser irradiation (group FL), and APF application after laser irradiation(group LF) on artificial caries-like lesion. Sound enamel was used as a control group. The ultrastructural changes and physical effects of the fluorided and lased enamel has been investigated by using SEM, enamel solubility and microhardness test as well as distributions of calcium, phosphorus and fluoride in internal enamel by using EPMA. The following results were obtained. 1. In the all experiment groups, the amounts of dissolved calcium of enamel surfaces significantly decreased according to increasing exposure time of acid solution than control group(P<0.001). Group L showed higher than that group FL and LF in 30 and 60min(P<0.05). 2. The microhardness values of enamel surface in the control group was highest than that in the other experiment groups. Group F, L, FL and LF were significantly increased than group C(P<0.001). The enamel surface treated with APF produced deposites of numerous small globules and lased enamel showed a cracker-like appearance with microcrack and small pore. Numerous deposits were infiltrated in the fissured portion of enamel treated with APF after laser irradiation. 4. In the case of APF application alone, the elevation of the fluoride profile can be seen within $5{\mu}m$ of the outermost layer and a similar profile observed in the specimen treated with APF before laser irradiation. However, the specimen treated with APF after laser Irradiation showed a large elevation within $10{\mu}m$ of the outermost layer of the enamel. 5. The higher Ca/P ratios were observed in $10{\mu}m$ depth of lased and fluorided enamel when compared to the sound and carious enamel. The fluoride content decreased rapidly with distance from enamel surface, in the group F, fluoride concentration was significantly higher than that in the group C, L, FL, LF and control group according to increasing enamel depth (P<0.05).

• The korean journal of orthodontics
• /
• v.34 no.6 s.107
• /
• pp.526-536
• /
• 2004

This study was undertaken to determine the effect of a 2.2mg/Kg/day intraoral administration of NaF on the amount of root resorption and osteoclastic activity during or after a rapid maxillary expansion procedure. Ten puerile female dogs were divided into two groups: a control group and a NaF-treated group. A fixed type maxillary expansion device was delivered to all dogs. The appliance was activated twice daily throughout a 20-day period, causing a 5-mm expansion of maxillary bone. After the expansion procedure, the animals were sacrificed at days 0, 15, 30, 45, and 60 of the retention period. The buccal surface of the root of each maxillary canine was examined by means of a surface electron microscope (SEM). Using SEM, web-like resorption lacunae were observed on the bone or the tooth surface at the site of osteoclastic activity; these observations were verified by histological methods. No peculiar resorption lacunae were found in the apical tip of the roots of either the control group or the NaF-treated group animals. The NaF-treated retention group was found to have less resorption lacunae formation on day 45 and day 60. The preventative effect of NaF on resorption lacunae formation on the surface of the bone covering the anchor tooth was confirmed. Larger areas of resorption lacunae were found on the surface of the bone covering the canines in the control group animals, as compared to those of the NaF-treated group, especially on day 30 and day 60. Using SEM, the present study revealed a difference between the control group and the NaF-treated group in the prevalence and the size of the resorption lacunae formation on the cemental root surface. The preventative effect of NaF on bone resorption was confirmed. Further studies concerned with the optimum concentration of NaF that has an effect in vivo are necessary.

• Journal of Oral Medicine and Pain
• /
• v.21 no.2
• /
• pp.207-224
• /
• 1996

This study was designed to determine the most effective concentration of fluoride and energy density of laser irradiation for the anticarious effect. For this study surface hardness in enamel was measured before and after irradiation with pulsed Nd;YAG laser and the topical application of fluoride. Of the permanent mandibular anterior hovine teeth, healthy, carious free ones were used. Three hundred specimens were made. Specimens within 25~45 Vickers hardness numbers were assigned to 20 control and experimental stoops ; each containing 15 specimens. After forming artificial carious lesions, 10 J/$\textrm{cm}^2$, 20 J/$\textrm{cm}^2$, and 30 J/$\textrm{cm}^2$ energies were irradiated on the enamel surface of each experimental group. Also NaF, NH4F, Elmex gel(amine fluoride) and APF gel fluoride compounds were applied topically. Next, all the specimens were placed into the pH circulatory procedures for eight days. Vickers hardness numbers were measured using a microhardness tester. Surface changes of the enamel were observed using an scanning electron microscope. The comparative ana1ysis yielded the following results : 1. The reduction of surface hardness of the enamel surface was less in all groups with fluoride application than in the group without fluoride application. 2. The APF gel croup with 10 J/$\textrm{cm}^2$ irradiation showed the lowest reduction of surface hardness. 3. The reduction of surface hardness of the enamel surface in the group of laser irradiation without fluoride application not showed any significant difference according to the energy density of the laser. 4. Under the scanning electron microscope, in enamel irradiated with 10J/$\textrm{cm}^2$ showed appearance similar to acid etching surface. In enamel irradiated with 20 J/$\textrm{cm}^2$, line enamel crack was detected. In enamel irradiated with 30j/$\textrm{cm}^2$, severe enamel crack and fusion of enamel were detected. These results suggest that one could obtain the best anticariogenic effects without damage to teeth in the group of application of APF gel after laser irradiation with 10 J/$\textrm{cm}^2$.

• Korean Journal of Materials Research
• /
• v.11 no.4
• /
• pp.294-299
• /
• 2001

Effects of the surface fluorination on the electrochemical charge-discharge properties of $Mg_2$Ni electrode in Ni-MH batteries fabricated by mechanical alloying were investigated. After 20h ball milling, Mg and Ni powder formed nanocrystalline $Mg_2$Ni. Discharge capacity of this alloy increased greatly at first one cycle, but due to the formation of Mg(OH)$_2$ passive layer, it showed a rapid degradation in alkaline solution within 10cyc1es. In case of 6N KOH +xN KF electrolyte (x = 0.5, 1, 2), a continuous and stable fluorinated layer formed by adding excess F$^{[-10]}$ ion, increased durability of $Mg_2$Ni electrode greatly and high rate discharge capability(90-100mAh/g). 2N KF addition led to the highest durability of all tested here. The reason of the improvement is due to thin MgF$_2$, which can prevent the $Mg_2$Ni electrode from forming Mg(OH)$_2$layer that is the main cause of degradation.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.1
• /
• pp.44-50
• /
• 2000

This study was carried out to get the basic data on the efficient processing method of food wastes for utilizing as the resources of swine feeds composition, mineral and toxic elements of food waste were estimated in relation to the steps of processing and fermentation with MS (Miraculous soil-bacteria) microorganism complex. The chemical composition of food wastes was largely varied according to disposing sites, collection time and season. Offensive odor was reduced by anaerobic fermentation with MS microorganism complex. Food wastes fermented with MS microorganism complex have high contents in crude protein (24.1% D.M) and crude fat (12.9% D.M). Mineral composition was to be relatively well balanced compared to other plant or animal feed resources. Particularly the content of sodium was slightly higher than that of grains or agricultural byproducts. In food wastes fermented with MS microorganism complex, heavy metals such as Hg, As or F were not detected. Pb or Cd were detected in small quantities but their levels were below the dose s-permitted feeding standard of permitted dose in feeding standard. These results indicated that food wastes could be efficiently used for the resources of swine feeds through proper processing and fermentation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2945-2950
• /
• 2015

While perfluoroalkane (PFA), a liquid state nucleating agent for a rigid polyurethane foam (RPUF) to enhance the thermal insulation property, has the excellent nucleating characteristics, it is very expensive as well as environmentally harmful due to the fluoride compound. Many researches, therefore, have been performed to develop the alternative nucleating agents to replace PFA. In the present work, a multi-wall carbon nanotube (MWCNT) was used as a sloid state nucleating agent, and thereby the effects on the property changes of the RPUF were carried out. Average cell size decreased from 165.6 for base RPUF to $162.9{\mu}m$ and cell uniformity was also enhanced, showing the standard cell-size deviation of 45.6 and 35.2, respectively. While k-factor of base PUF was $0.01763kcal/m.hr.^{\circ}C$, that of the sample with 0.01 phr MWCNT showed 1.02% reduced value of $0.01745kcal/m.hr.^{\circ}C$. Though the compressive yield stress is nearly the same as $0.030{\times}105Pa$ for the both samples, initial modulus of the sample with 0.01 phr MWCNT was higher than that of base sample. it was considered as the results that small amount of MWCNT could play a sufficient role as the effective nucleating agent for RPUF, showing that an echo-friendly RPUF with reduced-cost could be fabricated, which has an enhanced thermal and mechanical properties.

• Restorative Dentistry and Endodontics
• /
• v.34 no.1
• /
• pp.20-29
• /
• 2009

The purpose of this study is to observe and compare the dynamic change of artificially demineralized enamel by remineralization solutions of different degrees of saturation at pH 4.3. In this study, 30 enamel specimens were demineralized artificially by lactic acid buffered solution. Each of 10 specimens was immersed in pH 4.3 remineralization solution of three different degrees of saturation (0.22, 0.30, 0.35) for 10 days. After demineralization and remineralization, images were taken by a polarizing microscope (${\times}100$). The density of lesion were determined from images taken after demineralization and remineralization. During remineralization process, mineral deposition and mineral loss occurred at the same time. After remineralization, total mineral amount and width of surface lesion increased in all groups. The higher degree of saturation was, the more mineral deposition occurred in surface lesion and the amount of mineral deposition was not much in subsurface lesion. Total demineralized depth increased in all groups.

• Analytical Science and Technology
• /
• v.29 no.5
• /
• pp.219-224
• /
• 2016

불산 중 극미량 음이온의 고상추출과 이온크로마토그래프를 이용한 고감도 분석법이 개발되었다. 불산 중 불소이온이 고상에 의해 제거하였고 이어서 음이온 (F⁻, CH₃COO⁻, Cl⁻, Br⁻, NO₃⁻, PO₄³⁻, SO₄²⁻)들이 이온크로마토그래프를 이용하여 연속적으로 분리하였다. 고상 추출법에 영향을 주는 각 인자들 (흡착제의 선택, 시료의 부피 및 pH, 용출 용액과 용출용액의 부피)을 결정하였으며 그 결과 흡착제로서 Oasis WAX 컬럼이 가장 우수하였고 1.0 mL의 시료부피, 용출용액으로 50 mM 초산암모늄염 5 mL가 분리능에서 가장 우수하였다. 개발한 방법에 의한 음이온 (Cl⁻, Br⁻, NO₃⁻, PO₄³⁻, SO₄²⁻)들의 방법검출한계는 25 % 불산용액 (w/w) 중에 0.04~0.30 µg/L의 범위를 보였고 정밀도는 20.0와 40.0 µg/L의 농도에서 5 % 이내를 보였다. 한 제조회사에 의한 25 % 불산 중 음이온의 4.2에서 47.5 µg/L의 범위로 모두 검출되었다. 이 방법은 시험절차가 간단하고, 재현성 및 감도가 좋아서 반도체회사에서 불산 중 음이온 불순물을 정도 관리하는데 매우 유용한 방법이 될 것으로 판단된다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.73-80
• /
• 2007

Compomer that release fluoride could be used on proximal caries of child effectively. But oral cavity is always wet, so saliva inhibits bonding of tooth and compomer. When the saliva exist on bonding, it can be occured microleakages. The purpose of this study was to evaluate the influence of salivary contamination on compomer restoration and degree of microleakage according to restoration methods. Dyract $AP^{(R)}$ and prime and $bond^{(R)}$ NT was applied by the manufacture s instructions. Elipar Trilight was applied for light curing. Saliva pool was made for reconstruction of oral cavity. Two premolar was embedded in acrylic resin. After class II cavity preperation, Dyract $AP^{(R)}$ was restored under several condition, the specimen was thermocycled 500 times with 30 second dwell time. 0.5% methylene blue was used for microleakage test. Micoleakage was measured by the ratio of the infiltration length to occlusal and gingival side interface. Data were analyzed statistically using Kruskal Wallis Test, Mann-Whitney Test. The Result were as follows ; 1. In occlusal side, there were no statistical differences. 2. In gingival side, there were no statistical differences in Group III ($ContactMatrix^{TM}$, Rubber dam, $Oraseal^{(R)}$), Group IV (No saliva contamination). 3. In gingival side, there were no statistical differences in Group I$(ContactMatrix^{TM})$, II($ContactMatrix^{TM}$, Rubber dam). 4. In gingival side, there were statistical differences in Group I$(ContactMatrix^{TM})$, II($ContactMatrix^{TM}$, Rubber dam).