• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.4
• /
• pp.61-71
• /
• 2001

In these days, surveying instruments are developing rapidly and the precision is improving continuously. The reappearance of three dimensional terrains of a great precision are possible and the calculation of the area or the volume has a high precision due to the development of the technique of the spatial information system using computer. But actually, in construction site they calculate two-dimensional area using the traditional method, plane table surveying, planimeter, and then get ground surface area through timing the slope correction factor. In this study, I show the defect and inefficiency of the calculation of the area by the traditional methods and survey the area with Electronic Distance Measuring equipment and GPS instrument. With these data, we made the three dimensional terrain model and calculated two-dimensional area and ground surface area. After that, I compared areas that calculated by algorithm method of irregular triangle and analysis of grid method with standardizing the area that calculated by the traditional method. Finally, I suggested more effective and precise method in calculating ground surface area.

• Food Science of Animal Resources
• /
• v.23 no.4
• /
• pp.350-355
• /
• 2003

Raw skim milk and colloidal calcium phosphate-free skim milk were treated with microbial transglutaminase (TGase), ultracentrifuged at varying rates and were observed to contain textural properties using a scanning electron microscope (SEM). Skim milk showed irregular signs of conformation at lower centrifugal rate, and associated regular (10,000 ${\times}$g) and thin with broad holes (20,000 ${\times}$g). The associated texture became thick and irregular (40,000 ${\times}$g), and fine particles were regularly associated (100,000 ${\times}$g). When skim milk was incubated for 1 hr with TGase, casein micelles aggregated and broadened as centrifugation rate increased. When skim milk was incubated for 8 hrs with TGase, casein micelles associated to large widened aggregates, and were associated regularly which then became irregular (100,000 ${\times}$g). When colloidal calcium phosphate-free skim milk incubated for 1 hr with TGase showed no sediment, the milk incubated for 8 hrs with TGase associated together, yielding broadened and regular layers as the centrifugation rate increased. It is assumed that such phenomena could be caused by protein crosslinking reaction with TGase and conformational change of casein molecules, as well as dependencies on reaction time, temperature and ultracentrifugation rate.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.1
• /
• pp.52-60
• /
• 2015

Nuclear power plant contain many dissimilar metal welds that connect carbon steel components with stainless steel pipes using alloy600 welding materials. Primary water stress corrosion cracks at dissimilar metal welds have been continuously reported around the world. In periodic integrity evaluations, dissimilar metal welds are examined using a generic ultrasonic testing procedure, KPD-UT-10. In this procedure, the gap between the probe and examination surface is limited to 1/32 inch (0.8mm). It is not easy to test some dissimilar metal welds in Korean plants applying ordinary technology because of their tapered shapes and irregular surface conditions. This paper introduces a method for applying a flexible phased array technology to improve the reliability of ultrasonic testing results for various shapes and surface conditions. The artificial flaws in specimens with irregular surfaces were completely detected using the flexible phased array ultrasonic technology. Therefore, it can be said that the technology is applicable to field examination.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.961-967
• /
• 2009

In this paper, the lossless compression method is proposed for an 8-bit bitplane of the input image. The lower bitplanes are not well compressed because of irregularity of pixels. To overcome these drawbacks, this paper propose a mixed coding method that using the block-based lossless compression and the bit-based losselss compression, introducing the H. 264 and the JBIG. First, to take advantage of the characteristics of the bitplanes, 8-bitplane against the top 4 bits and lower 4 bits were separated. Next, the JBIG compression method was used in separated top 4-bitplane because of a lot of correlation between bits. And a separated lower 4-bitplane was applied the improved method that using the H. 264 lossless prediction. A pre-processing method applied to the lower 4-bitplane then irregular distribution of pixel values are converted to regular. Using the proposed method to test for various test images were performed. Experimental results from a printer using 8-bit image compared to JBIG average 19%, lower 4bit image compression performance with an average of 11% could be obtained.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.242-243
• /
• 2023

Different incident angles concerning ocean conditions and weather greatly influence small vessel navigation. Particularly for small vessels, different incident angles result in distinct motion characteristics closely related to stability. Based on actual coastal wave data, this study conducted simulations and experiments to analyze the motion characteristics of small vessels navigating in irregular waves. The analysis revealed that significant motions primarily occurred at lower speeds from the bow sea. In contrast, as the speed increased, the roll motions due to the bow sea decreased, but those due to the stern seas increased. Consequently, adjusting the incident wave angles according to vessel speed can enhance stability and navigational efficiency for small vessels.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06c
• /
• pp.75-79
• /
• 1994

한국어 어절의 모든 가능한 형태소 분석 결과는 형태소 격자 구조로 대응된다. 즉, 형태소 분석과정은 형태소 격자 구조를 만드는 과정과 동일하다고 말할 수 있다. 기존의 방법들은 여러개의 가능한 분석 결과에 중복되는 형태소들을 그대로 저장하여 자료 관리의 비효율성이 있었다. 본 논문에서 설명하는 형태소 분석기는 형태소 분석의 중간 결과를 공유하여, 자료의 중복 저장을 피했고, 모든 가능한 형태소 분석 결과를 형태소 격자 구조의 가능한 모든 경로로 대응하였다. 한편, 형태소 배열 규칙은 품사 태깅된 말뭉치로부터 자동으로 추출되었다. 또한, 사전도 품사 태깅된 말뭉치로부터 자동으로 구축되었으며, 굴절된 형태소는 등록되지 않는다. 그러나 불규칙 및 축약 현상에 관한 정보는 수동으로 추가되었다. 불규칙 및 축약 현상의 발생 가능 위치는 한글 자소 패턴에 의해서 찾아지고, 이들 현상의 처리는 절차적인 방법에 의해 해결되었다.

• The Korean Journal of Quaternary Research
• /
• v.12 no.1
• /
• pp.45-54
• /
• 1998

파주 금파리 구석기 유적에서 드러난 구덩이 유구들은 타원형이거나 약간 불규칙하 기는 하지만 타원형 또는 불규칙한 평면모양을 하고 있고 내부에 호소성 퇴적물이 보이는 경우도 있다. 그런데 내부에서 구석기 유물들이 집중 출토되어 주목된다. 이유구의 형성요인 은 현재로서 정확하지는 않지만 흐르는 물에 의해 침식이 된 흔적 거대한 나무가 쓰러지면 서 생긴 구덩이 그리고 인위적인 가공등을 들수 있는데 현재로서는 자연적으로 형성되었을 가능성이 가장 많지만 인위적인 변형이나 이용가능성을 전혀 배제 할 수는 없다. 여하간에 이러한 작업가설들 모두가 아직은 검증되지 못한 단계로 앞으로 이러한 현상에 대한 직접관 찰을 반복함으로써 설명될수 있을것으로 보이며 구덩이의 형성과정의 복원과 함께 이러한 구덩이가생길 수 있는 기후 및 지질환경의 복원은 구석기인들이 생활을 복원하는데 주용한 시사를 할 것으로 생각된다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.6
• /
• pp.56-61
• /
• 1973

The temperature coefficients and phase velocity dispersions of elastic surface wave layer mode with Ag or Pd layer on piezoelectric LiNbO3 svbstrate rotated 131$^{\circ}$ Y out are calculated as a function of thickness by numerical method. Calculated results are shown that the temperature coefficients are rapidly increased in proportion as the thickness of Ag layer increases. and irregular variation of the temperature coefficients appears in the case of Pd layer. Minimum value, -36$\times$10 /$^{\circ}C$, of the temperature coefficients of elastic surface wave with Pd layer on LiMbO3 substrate rotated 131$^{\circ}$ Y cut is obtained at wh=9000.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.1
• /
• pp.61-71
• /
• 1994

A modified method obtained by expanding Longuet-Higgins and Stewart's method (1964) is proposed. which can easily derive the group-bountied long wave due to the irregular were group as well as the regular wave group. The result of the proposed method agree well with those of both second order nonlinear theory and radiation stress theory. Particularly in the shallow water region, three equations from the proposed method, the second order nonlinear theory and the radiation stress theory become identical.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.1013-1018
• /
• 2003

This paper deals with the secondary excited induction generator applied to random energy input generation system. As it is preferred to stabilize the output voltage and frequency in the constant level, microcomputer controlled inverter connected to the secondary windings supplies the secondary current with slip frequency. For testing the appropriateness of this paper, the input torque simulator, which generate the statistically varied wave power input torque in the laboratory to drive the secondary excited induction generator, are constructed. The experimental and numerical results show the advantage of secondary excited induction generator system for the random input wave generation system.