• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.874-881
• /
• 2022

Until 2016, before discussions on the restoration of brackish water of the Nakdong River Estuary started in earnest, the downstream water level was predicted using the data of existing tide level observatories (Busan and Gadeokdo) several kilometers away from the estuary. However, it was not easy to carry out the prediction due to the dif erence in tide level and phase. Therefore, this study was conducted to estimate tide prediction more accurately through tidal harmonic analysis using the measured water level affected by the tides in the offshore waters adjacent to the Nakdong River Estuary. As a research method, the storage status of observation data according to the period and abnormal data were checked at 10-minute intervals in the offshore sea area near the Nakdong River Estuary bank, and the observed and predicted tides were measured using TASK2000 (Tidal Analysis Software Kit) Package, a tidal harmonic analysis program. Regression analysis based on one-to-one comparison showed that the correlation between the two components was high correlation coef icient 0.9334. In predicting the tides for the current year, if possible, more accurate data can be obtained by harmonically analyzing one-year tide observation data from the previous year and performing tide prediction using the obtained harmonic constant. Based on this method, the predicted tide for 2022 was generated and it is being used in the calculation of seawater inflow for the restoration of brackish water of the Nakdong River Estuary.

• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.183-188
• /
• 2003

The dielectric constants of fluorine-containing epoxy resins, 2-diglycidylether of benzotrifluoride(FER)/4,4'-diamino-diphenyl methane (DDM) and diglycidylether of bisphenol-A (DGEBA)/DDM systems were evaluated by dielectric spectrometer. Glass transition temperature and thermal stability factors, including initial decomposed temperature, temperatures of maximum rate of degradation, and decomposition activation energy of the cured specimens were investigated by dynamic mechanical analysis and thermogravimetric analysis. For the mechanical properties of the casting specimens, the fracture toughness, flexural, and impact tests were performed, and their fractured surfaces were examined by scanning electron microscope. The dielectric constant of FER/DDM system was lower than that of commercial DGEBA/DDM system, and the mechanical properties of the cured specimens showed higher values than those of DGEBA/DDM system. This was probably due to the introduction of trifluoromethyl (CF$_3$) group into the side chain of the epoxy resins, resulting in improving the electric and mechanical properties of the epoxy cure system studied.

• Journal of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.85-93
• /
• 1988

Solvolyses of t-butylhalides (X = Cl, Br, I) in quasi isodielectric solvent system, MeOH-nitromethane, MeOH-nitrobenzene and MeOH-ethyleneglycol have been studied kinetically. Methanolyses for t-butylhalides in MeOH-NM and MeOH-NB show rate maxima at 40~100 % (v/v) MeOH. The rate maxima observed have been interpreted as a result of cooperative enhancement of polarity-polarizability and hydrogen bonddonor ability of solvents. The influences of polarity-polarizability and hydrogen bonddonor ability on reactivities of substrates have been discussed in terms of Y value changes. The solvolysis rates for t-butylhalides in E.G. are more than 20 fold faster than those in MeOH and this was attributed to the solvent structure of E.G.

• Journal of the Korean Chemical Society
• /
• v.37 no.3
• /
• pp.287-293
• /
• 1993

Ultraviolet spectrophotometric investigation has been carried out on the system of charge-transfer(CT) complex with iodine and tetramethyltin in n-hexane and acetone. From these results, the transient CT absorption spectrum can be observed and the subsequent disappearance of CT absorption spectrum is accompained by the cleavage of tetramethyltin with iodine (iododestannylation). Therefore, the rate constants for the iododestannylation were determined at 10, 25 and 35$^{\circ}C$ up to 1600 bar and the rates of reaction were increased with increasing temperature and pressure. From these rate constants, the values of the activation parameters (${\Delta}V^{\neq}$, ${\Delta}{\beta}^{\neq}$, ${\Delta}H^{\neq}$ and ${\Delta}S^{\neq}$) were obtained and discussed in terms of solvent structure variation of transition state and mechanism from these values. It could postulated that the reaction is followed with S$_F$2 mechanism and weakened S$_F$2 mechanism nature by increasing pressure.

• Journal of the Korean Magnetics Society
• /
• v.21 no.6
• /
• pp.204-207
• /
• 2011

We developed a time-resolved magneto-optical Kerr effect microscope system to investigate ultrafast magnetization dynamics. Based on the pump-probe method, 0.1-ps time resolution was achieved by use of a fs Ti:Sapphire laser. The magnetization dynamics was then measured on Pt/Co/Pt thin films with various Co thicknesses. All the samples exhibited ultrafast demagnetization within a few ps by direct heating of pump laser. Some thicker samples showed precessional motion of magnetization, from which the Gilbert damping constant was determined based on the Landau-Lifshitz-Gilbert equation.

• Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.321-326
• /
• 2007

An organophosphorus insecticide, chlorpyrifos, has been of a great concern due to persistence, toxicity and accumulation in soils and groundwaters. This study deals with degradation efficiency and dechlorination kinetics of chlorpyrifos by various types of zerovalent irons (ZVIs) for effective remediation of the soils contaminated with chlorinated pesticides. Chlorpyrifos degradation rate was increased with increasing ZVI treatment amount and reaction time. The degradation rate and dechlorination kinetics of chlorpyrifos increased in the order of mZVI > nZVI > cZVI in solutions and soils. Dechlorination number value of chlorpyrifos by cZVI, nZVI and mZVI treatment exhibited 1.08, 3.09 and 3.18, respectively. In soils, degradation efficiency and kinetics of chlorpyrifos significantly were affected by moisture content because of the limited contact between ZVIs and chlorpyrifos. These results suggest that nanosized and functionalized mZVI could be effectively applied to degradation of chlorinated pesticides in the soil and aqueous environments.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.746-752
• /
• 2005

In this study, the effect of reaction parameters including reaction temperature, time, and pressure on sludge degradation and conversion to intermediates such as organic acids were investigated at low critical wet air oxidation(LC-WAO) conditions. Degradation pathways and a modified kinetic model in LC-WAO were proposed and the kinetics model predictions were compared with experimental data under various conditions. Results in the batch experiments showed that reaction temperature directly affected the thermal hydrolysis reaction rather than oxidation reaction. The efficiencies of sludge degradation and organic acid formation increased with the increase of the reaction temperature and time. The removal of SS at $180^{\circ}C$, $200^{\circ}C$, $220^{\circ}C$ and $240^{\circ}C$ of reaction temperatures and 10 min of reaction time were 52.6%, 68.3%, 72.6%, and 74.4%, respectively, indicating that most organic suspended solids were liquified at early stage of reaction. At $180^{\circ}C$, $200^{\circ}C$, $220^{\circ}C$ and $240^{\circ}C$ of reaction temperatures and 40 min of reaction time, the amounts of organic acids formed from 1 g of sludge were 93.5 mg/g SS, 116.4 mg/g SS, 113.6 mg/g SS, and 123.8 mg/g SS, respectively, and the amounts of acetic acid from 1 g of sludge were 24.5 mg/g SS, 65.5 mg/g SS, 88.1 mg/g SS, and 121.5 mg/g SS, respectively. This suggested that the formation of sludge to organic acids as well as the conversion of organic acids to acetic acid increased with reaction temperature. Based on the experimental results, a modified kinetic model was suggested for the liquefaction reaction of sludge and the formation of organic acids. The kinetic model predicted an increase in kinetic parameters $k_1$ (liquefaction of organic compounds), $k_2$ (formation of organic acids to intermediate), $k_3$ (final degradation of intermediate), and $k_4$ (final degradation of organic acids) with reaction temperature. This indicated that the liquefaction of organic solid materials and the formation of organic acids increase according to reaction temperature. The calculated activation energy for reaction kinetic constants were 20.7 kJ/mol, 12.3 kJ/mol, 28.4 kJ/mol, and 54.4 kJ/mol, respectively, leading to a conclusion that not thermal hydrolysis but oxidation reaction is the rate-limiting step.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.649-655
• /
• 2010

This study investigated the degradation of phenol using sonication and/or UV-C. The effects of frequency, temperature, pH in solution, argon purging, with UV intensity were estimated in sonication-only, UV-only, and the combined reaction of sonication with UV. The optimum condition for degrading phenol in the sonication-only reaction was 35 kHz, $5^{\circ}C$, and pH 4. As this condition approximately 30% degradation of phenol was achieved within 360 min. However, phenol in the UV-only at $19.3\;mw/cm^2$ under the same condition was completely degraded within 60 min. In the combined system of sonication with UV, the degradation of phenol was well fitted to first-order rate model, and phenol was completely degraded within 360 min and 45 min at UV intensity of $7.6\;mW/cm^2$($17.3{\times}10^{-3}\;min^{-1}$) and $19.3\;mW/cm^2$($138.1{\times}10^{-3}\;min^{-1}$), respectively. Adding methanol, as a radical scavenger, in the phenol degradation in the sonication reaction indicates that OH radical is a major factor in the degradation of phenol. The order of degradation efficiencies of phenol was in the order of as follows; combined reaction of sonication with UV > UV-only > sonication-only.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.460-465
• /
• 2007

Endosulfan-${\alpha}$ endosulfan-${\beta}$ and endosulfan-sulfate, which are classified as pesticides, were degraded by use of UV energy and ultrasonic irradiation. The degradation residuals were analysed by gas chromatography with an electron capture detector and TOC (total oragnic carbon) analysis. The reactions were conducted in a quartz annular reactor equipped with a low pressure mercury multilamp (8Wx2) and a sonic generator. All the aqueous solutions were concentrated as 10 mg/L initially. Endosulfans were degraded each to result in 48.2% (${\alpha}$), 50.0% (${\beta}$) and 76.5% (sulfate) of removal efficiency by UV energy, and 66.9% (${\alpha}$), 55.8% (${\beta}$) and 72.7% (sulfate) by ultrasonic irradiation, respectively. In contrast to the results of the single-component solutions, degradation of the endosulfan-sulfate was greatly suppressed to result in the lowest degradation rate and removal efficiency in the three-component solutions. This finding suggests that there should be a reversible reaction with a substantially low equilibrium constant between endosulfan-${\alpha}$ or -${\beta}$ and -sulfate in the coexistence of the three endosulfans. TOC data showed the endosulfans were decomposed by 20%~40% toward complete mineralization, producing a quantity of intermediates induced by the radical reactions. We found that all the decay reactions considered in this study nicely fell into pseudo first-order rate.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1B
• /
• pp.97-103
• /
• 2009

The decompostion characteristics of NAPL TCE in cement/slag/Fe(II) system were studied with various TCE concentration and amounts of binders (cement/slag) For analyses of the TCE degradation by cement/slag/Fe(II), TCE solution injected using gas-tight syringe after TCE solution dissolved a methanol. Initial concentrations of TCE are 0.42 mM, NAPL condition 11.7 mM and saturated condition 16.8 mM respectively. The result showed that the cases of 8.4 mM and 4.2 mM are decreased 88% of total TCE concentration within 18 days. NAPL condition 11.7 mM was decreased 84% within 50 days and saturated condition 16.8 mM was decreased 60% of total TCE concentration within 60 days respectively. This showed that degradations of TCE in various concentrations were in one kind reaction as pseudo-first-order. TCE was dissolved as aqueous solution before degraded. The reaction rate was increased $0.12day^{-1}$, $0.24day^{-1}$, $0.31day^{-1}$ when the mass of media 0.1, 0.2, 0.3 S/L rate was increased. TCE reaction speed is affected by cement/slag surface ares in this system. When HDTMA, experimental facter, was added, TCE decomposition rate was high despite the high concentration of NAPL. and The decompostion characteristics of NAPL TCE in cement/slag/Fe(II) system were studied by using modeling.