• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.405-414
• /
• 2008

When we evaluate slope stability, we regard the slope homogeneous and evaluate slope stability at the most dangerous portion of slope. However, since conditions and properties of rock mass/soil are different from one location to another within a single slope, slope stability evaluated by current concept can not represent slope correctly. This also result in over-reinforcement at the portion where reinforcement is not necessary. In order to solve these problems, we suggest a cell unit evaluation method in which we apply small rectangular cells in a slope and regard each cell as a single slope. In this method, slopes are classified into soil slope and rock slope depending on materials. Strength of rock, volumetric joint count, spacing of joints, condition of joints, ground water condition and so on are examined and SMR and condition index values are calculated. Finally, all data and results are presented as contour maps. We apply the cell unit evaluation method into 3 cut slopes. SMR values estimated by the new method are larger than those by current concept at most portions of slope, indicating that the new method suggested by this research represent slope stability more correctly than methods which were used. This method will prevent over-reinforcement at the portion of slope where reinforcement is not necessary.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7A
• /
• pp.720-726
• /
• 2008

In this paper, we propose a multi-cell cooperation method for broadcast packet data services in the orthogonal frequency division multiplexing (OFDM)-based cellular system with multiple transmit antennas. In the proposed method, to transmit two streams of spatially demultiplexed or transmit diversity coded symbols over a number of transmit antennas, we divide a coded packet into multiple subparts to which different cell groups and antenna pairs are assigned. The proposed method enhances the diversity order by transforming the channel frequency responses of two symbol streams in each subpart of the broadcast packet. The increase in diversity of the proposed method is shown with the outage probability under various configurations.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.5
• /
• pp.48-55
• /
• 2010

As the complexity and the clock speed of semiconductor integrated circuits increase, silicon validation becomes important. In this research, we developed new post-silicon repair & revision techniques to reduce cost and time-to-market. Spare cells are fabricated with the original design and are used for repair when necessary. The interconnections are modified by repair layer revision. The repair cost can be reduced by logic partitioning. Experimental results show that these techniques are effective for low-cost and fast turnaround repair.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.2
• /
• pp.207-217
• /
• 1993

In this paper, knowing a priori probability of phase offset between transmitted codes and reference codes in the receiver, we construct the state diagram of acquisition process of the direct sequence spread-spectrum communication system using the expanding window search. The scannings are performed from the cell with higher probability code epoch synchronization to that with lower one. We expand window size from initial value by r times of its previous size in each search, construct the corresponding the state diagrams, and derive average synchronization time using the Markov process and Mason's gain formula. Average synchronization times versus number of search n and detection probability $P_d$ are calculated.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.797-800
• /
• 2007

Radio Frequency IDentification(RFID) 시스템은 리더와 태그로 구성되어 리더에서 태그로 신호를 전송하여 태그로부터 원하는 정보를 얻는 시스템이다. 이 시스템에서 리더와 태그가 통신을 할 때 근접한 거리에 있는 리더들이 동일한 주파수를 이용하거나, 여러 리더가 동시에 하나의 태그에 명령을 전송하는 경우 서로 간섭을 일으켜 RFID 리더 충돌이 발생하는데, 본 논문에서는 이 충돌을 방지하기 위한 셀 분할 기법과 셀 내의 충돌 문제를 해결하기 위한 CCA 기법을 소개한다. 또한 CCA 기법의 성능 개선을 위한 Beacon 채널 CCA 방식을 제안한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.9
• /
• pp.2014-2021
• /
• 2015

Opportunistic interference alignment (OIA) has been proposed for multi-cell random access networks (RAN), which minimizes the generating interference to neighboring RANs and yields better performance compared with the conventional techniques. The OIA for RANs considers both physical (PHY) and medium access control (MAC) layers. In this paper, we introduce a protocol of which each user maximizes the transmit signal regardless of the generating interference to neighboring RANs, contrary to the OIA technique. In addition, we compare the performance of the signal-maximization technique with the OIA technique.

• Journal of Internet of Things and Convergence
• /
• v.8 no.4
• /
• pp.17-23
• /
• 2022

NB-IoT and LTE Cat.M1 based on LPWA(Low Power Wide Area) are commercialized and serviced by mobile carriers. As the demand for IoT devices is increased, the number of subscribers to these services is also increasing. In the beginning of service, there was no issue that eNB capacity for NB-IoT and LTE Cat.M1. However, as the number of subscribers increases, there is an issue that the eNB capacity for these service is insufficient. Active UE capacity issue may cause overload by continuous increase and temporary increase. In this paper, we propose a solution to solve the problem of LTE RRC(Radio Resource Control) Active UE capacity shortage and base station overload caused by the increase of NB-IoT and LTE Cat.M1 UE in same eNB. The proposed solution can increase a cell capacity without cell division and additional eNB, and can also improve the service quality of these UEs.

• Journal of the Korean Chemical Society
• /
• v.63 no.5
• /
• pp.335-341
• /
• 2019

Spirulina was cultured in Selenium solution and the total concentration was determined with isotope dilution technique. Low-molecular-weight-Selenium species for the water extract of Spirulina were separated and quantified with HPLC ICP/MS. Water extraction was used first and then protein enzyme (protease XIV) was used to digest and extract for the Se species in both water extract and residue. The total Se was $414.9{\pm}4.0{\mu}g\;g^{-1}$ and 77% existed in water extract while 22% remained in residue. Se species in supernatant was mostly inorganic selenate ($222.7{\mu}g\;g^{-1}$). After hydrolysis of protein, SeCys ($15.20{\mu}g\;g^{-1}$) and SeMet ($12.13{\mu}g\;g^{-1}$) were found. In residue, SeCys and SeMet were found with little inorganic Se. After protein hydrolysis of residue, more of Selenoamino acids SeCys ($9.35{\mu}g\;g^{-1}$) and SeMet ($18.23{\mu}g\;g^{-1}$) in addition to MeSeCys ($1.5{\mu}g\;g^{-1}$) were found. It is thought that inorganic selenium is mostly adsorbed on the surface of spirulina and can be easily removed by a simple distilled water extraction while most of organo-seleniums are remained in residue.

• Resources Recycling
• /
• v.20 no.6
• /
• pp.50-55
• /
• 2011

Using ultrasonic irradiation, the separation and recovery of PV cell, made of silicon wafer, from PV module was carried out through selective decomposition of EVA used as an interlaminated binder. The ultrasonic cleaner of bath-type (Output: 130 W, Frequency: 40 kHz) was used as an ultrasonic apparatus in this research. With the fixed distance of 2 cm, from ultrasonic generator to PV cell, the experiment of EVA decomposition was performed in various organic solvents such as Toluene, Trichloroethylene, O-dichlorobenzene, Benzene. And also their concentrations and temperature was changed to survey the optimum conditions. However EVA can be decomposed perfectly at $55^{\circ}C$ within 160 min in 5 M of all kinds of solvent, PV cell may be recovered with being damaged or broken severely. This damage may be resulted from the swelling of EVA in the process of decomposition. Whereas, at the condition of 5 M at $65^{\circ}C$, PV cell can be recovered with the state of minor damage or crack. This implies that the decomposition rate of EVA increases with an increase of temperature, thereby EVA can be decomposed before the swelling of EVA layer. Conclusively, it is possible for PV cell to be recovered within 40 min, at $65^{\circ}C$ in 5 M, with less damage.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.2
• /
• pp.111-117
• /
• 2017

In this paper, a local deformation effect in thin-walled box beams is investigated via a finite element modal analysis. The analysis is carried out for single-cell and multi-cell box beam configurations. The single-cell box beam with and without a neck, which mimics a simple wind-turbine blade, is analyzed first. The results obtained by shell elements are compared to those of one-dimensional(1D) beam elements. It is observed that the wall thickness plays a crucial role in the natural frequencies of the beam. The 1D beam analysis deviates from the shell analysis when the wall thickness is either thin or thick. The shell modes(local deformations) are dominant as it becomes thin, whereas the shear deformation effects are significant as it does thick. The analysis is extended to the single-cell box beam with a neck, in which the shell modes are confined to near the neck. Finally the multi-cell box beam with a taper, which is quite similar to real wind-turbine blade configuration, is considered to investigate the local deformation effect. The results reveal that the 1D beam analysis cannot match with the shell analysis due to the local deformation, especially for the lagwise frequencies. There are approximately 5~7% errors even if the number of segments is increased.