• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.292-296
• /
• 1998

Normal phase or reversed phase liquid chromatographic separation of isoquinoline of heterocyclic compounds and structural isomers of external substituents, $COOCH_3$, CN and $CH_3$ has been carried out by using several different columns and various mobile phases. From this results, the order of elution of heterocyclic compounds appears to depend on the solvent effect with kinds of mobile phases. Retention mechanism of normal phase system for 2-methylindoline, 2-methylindole, benzoxazole and benzothiazole was also studied depending on adsorption strength between solute and stationary phase of column. However, retention factors of reversed phase system were found on hydrophobic interaction with solvophobic effect.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.4
• /
• pp.281-286
• /
• 2011

The objective of this study is to optimize the four-bed six-step pressure swing adsorption(PSA) process for high purity $CH_4$ recovery from the biogas. The effects of P/F(purge to feed) ratio and cycle time on the process performance were evaluated. The cyclic steady-states of PSA process were reached after 12 cycles. The purity and recovery rate of product gas, pressure and temperature changes were constant as the cycle repeated. It was shown that the P/F ratio gave significant effect on the product recovery rate by increasing the amount of purge gas in purge and regeneration step. The optimal P/F ratio was found to be 0.08. As the cycle time increased, the product purity decreased by increasing the feed gas flow rate. It was found that the optimal operating conditions were P/F ratio of 0.08 and total cycle time of 1,440 seconds with the purity of 97%.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.43-48
• /
• 2008

In this study, the hyper branched poly (styrene-co-divinylbenzene) (PSD) was synthesized by bulk polymerization and the cationic exchanger with high ion exchange capacity was prepared by sulfonation. The structure of hyper branched PSD ion exchanger was investigated by FT-IR, $^1H-NMR$ spectroscopy, and GPC analysis. The molecular weight, viscosity of hyper branched PSD increased with DVB content, which have the maximum values of 9410g/mol and 338 cP, respectively. And the reaction rate also increased with cross-linker content. As DVB content increased, the solubility of PSD decreased having the maximum value of 22 g with 0.1 mol% DVB. The water content and ion exchange capacity of the hyper branched PSD ion exchanger increased with the amount of sulfuric group. Their maximum values were 18.2% and 4.6 meq/g, respectively. The adsorption of copper and nickel ion was completed within 40 min.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.204-210
• /
• 1997

Zeolite 4A-impregnated complex molecular sieve was prepared by hydrothermal reaction after aluminosilicate gel was penetrated into the pore of activated carbon granule. The crystals of zeolite 4A mainly were formed in the macropore of activated carbon, and their average diameter is $0.8{\mu}m$. The pore volume of activated carbon granule is $0.67m{\ell}/g$, and the pore volume of the sample including 21.6wt% of zeolite 4A crystal is $0.41m{\ell}/g$ decreasing the pore volume by 40% due to the crystallization of zeolite 4A crystals on the internal surface of activated carbon. The calcium ion exchange capacity of zeolite 4A-impregnated sample is 320mg $CaCO_3/g$ zeolite, and this value is almost the same as that of zeolite 4A powder. The crystal of zeolite 4A was not separated from the support of activated carbon granule in the course of ultrasonic dispersion. The adsorption isotherm of water on zeolite 4A-impregnated sample shows the intermediate shape between types, I and III. In addition, zeolite 4A-impregnated sample shows the hydrophilic and hydrophobic properties simultaneously.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.21-27
• /
• 1993

Technical grade n-hexane whose purity is 54% has been purified for HPLC use. Methylcyclopentane, 2-methylpentane, and 3-methylpentane which are hardly isolated by fractional distillation were separated by the liquid-solid chromatography using molecular sieve 5A. UV and fluorescence impurities whose contents are critically regulated for HPLC solvent were removed by the adsorptive separation with alumina and silica gel. The present method also reduced the impurities of color(APHA), acidity, water, residue after evaporation, sulfur, and thiophene content, and the impurity contents were well within the specifications of HPLC solvent.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.63-63
• /
• 2012

편광분석법(ellipsometry)은 대상 물질의 유전율 함수의 실수부와 허수부를 Kramers-Kronig 관계식의 도움 없이 그 물질상수를 정확히 측정할 수 있는 매우 우수한 기술이다. 이 기술의 큰 장점 중 하나는 빛의 편광상태의 변화를 이용한 비파괴적인 방법으로써 실시간 측정이 가능하며, 박막의 두께측정의 오차범위는 0.1 nm 이하로써 매우 정확하다는 것이다. 본 연구자는 이러한 우수한 측정 기술인 편광분석법을 고진공의 분자살박막증착장치(MBE) 와 결합하여 AlSb, AlP의 유전율 함수를 측정하였다. Al 계열을 포함하는 반도체 화합물은 Al의 산소친화력이 강해 대기 중에서 순수한 유전율 함수를 얻기가 불가능하다. 하지만 본 연구실에서 초고진공 상태의 MBE 챔버에서 시료를 성장시키는 동시에 실시간으로 편광분석기를 이용하여 측정하였고, 지금까지 발표된 결과들 중 가장 순수한 상태의 AlSb 유전율 함수를 얻어낼 수 있었다. 또한 순수한 AlP의 유전함수를 측정할 수 있었고, 이는 편광분석기를 이용한 최초의 실험결과로써 이차미분을 이용한 전이점 분석결과 이론적인 전자밴드구조에서 E1, E1+${\Delta}1$, E2에 해당하는 밴드갭들을 확인할 수 있었다. 또한 표면의 원자배열 구조와 실시간으로 일어나는 그들의 역학적인 현상들에 관한 정보를 얻을 수 있는 surface photoabsorption (SPA)를 metalorganic chemical vapor deposition (MOCVD)에 장착하여 실시간 모니터링이 가능하도록 하였다. SPA를 이용하여 GaAs/AlGaAs 양자우물구조의 성장을 원자층 수준으로 실시간 모니터링을 할 수 있었다. 그리고 SPA를 이용하여 MOCVD 안에서 InP에 As가 흡착 및 탈착되는 현상을 분석하여, As의 흡착이 두 단계에 의해 이루어짐을 분석하였다. 그리고 편광분석법의 빠르고 정확한 측정 기술을 규칙적인 구조체에서 전자기파의 회절을 구할 수 있는 Rigorous Coupled-Wave Analysis (RCWA) 계산방법과 결합하여 나노구조의 기하학적인 모양을 정확하고 빠르게 구할 수 있었다. 본 연구를 위해 규칙적인 3차원 Si 구조체 제작하여 편광분석기로 측정하고 $SiO_2$와 표면 거칠기를 고려하여 RCWA로 분석한 결과, 규칙적인 Si 구조와 산화막 층까지 정확하게 분석할 수 있음을 확인하였다. 또한 규칙적인 나노구조분석 연구를 넘어 불규칙적인 나노구조에 대한 분석 가능성을 보이기 위해 InAs 양자점을 증착하여 분석하였고, 이를 통해 편광분석법과 RCWA를 이용하여 불규칙적인 나노구조의 모양과 크기, 분포의 분석이 가능함을 보였다.

• Analytical Science and Technology
• /
• v.10 no.6
• /
• pp.408-417
• /
• 1997

Normal phase or reversed phase liquid chromatographic separation of some structural isomers of functionalized heterocyclic compounds has been carried out by using several different columns and various mobile phases. The optimal experimental conditions for separation of structural isomers were found on a ternary solvent system including alcohol as a modifier. This polar modifier is preferentially adsorbed onto strong adsorption site, leaving a more uniform population of weaker site that then serve to retain the sample. This 'deactivation' of the adsorbent leads to a number of improvements in subsequent separations. The optimal mobile phase system of separation were found on normal phase on structural isomers. Retention mechanism of normal phase system was also studied depending on adsorption strength between solute and stationary phase of column. However, retention factors of reversed phase system were found on hydrophobic interaction with solvophobic effect.

• Membrane Journal
• /
• v.5 no.2
• /
• pp.89-96
• /
• 1995

The monolayer characteristics of phosphate amphiphiles with azobenzene at air/water interface were studied by the measurment of $\pi-A$ curves and absorption spectra. Immediately after being spread on the water surface, these amphiphiles having strong intermolecular hydrogen bonding interactions showed the typical absorption spectra which resulted from domain formation. But the aggregated domains could be controlled by changing the subphase conditions (adding bulky salt and rasing pH). Addition of metal ions in subphase changes the molecular orientation of monolayer. As the metal ion charge increases ($1\leq2$ < 3 < 4 valence), the absorption maximum (310nm) of the amphiphile with azobenzene shifts to a longer wavelength (350nm) which means that the orientation of the amphiphile is tilted. These results suggest that the molecular orientation, and furthermore the aggregation state of monolayer can be possibly controlled by the interaction of metal ions with different charge types.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.341-343
• /
• 2002

인간의 생활수준은 산업의 발달과 함께 꾸준히 향상되고 있으나 환경은 산업발달의 부산물로 배출되는 공해물질들로 인하여 급속히 열악해지고 있다. 대표적인 악취물질로는 암모니아, 황화수소 및 트리메틸아민 등을 들 수 있으며 공간으로부터 악취분자들을 적극적으로 제거하는 탈취소취법에 오늘날 많은 관심이 집중되고 있다. 일반적인 탈취재료는 활성탄, 제올라이트 등의 무기물이 오래전부터 사용되고 있으나 이들의 대표적인 악취물질인 암모니아가스, 황화수소 등 유해가스에 대한 흡착능력은 매우 낮으며 흡착제 형태가 입상이기 때문에 성형가공면에서 한계가 있다. (중략)

• Bulletin of Food Technology
• /
• v.12 no.3
• /
• pp.8-13
• /
• 1999

키틴/키토산은 지질흡수의 억제, 혈중 콜레스테롤의 저하, 항고혈압활성, 면역활성, 항종양/항암활성 등 다양한 생체기능성을 나타내어 건강지향적인 기능성 식품으로서의 이용가치가 매우 큰것으로 평가되고 있다. 키토산은 성인남자의 혈중 콜레스테롤을 감소시키고 HDL cholesterol은 증가시켜 동맥경화지수를 낮추며 비만환자에게 투여시 체중, 중성지질, LDL cholesterol을 유의하게 낮춤으로서 고지혈증과 비만증의 개선에 유용한 것으로 평가된다. 키토산은 또한 성인의 고염식에 의한 혈압상승을 억제하며 3량체 내외의 키틴/키토산 올리고당은 혈압상승의 중요인자인 angiotensin converting enzyme과 직접 반응하여 활성을 현저히 저하시키고 SHR에서의 혈압을 유의하게 억제하는 특성을 보여 고혈압의 억제 및 치료에도 응용가치가 클 것으로 생각된다. 키틴/키토산 및 그 올리고당은 sarcoma 180, Meth-A solid tumor의 성장을 저해하고 L1210와 같은 negative charge를 갖는 malignant cell을 흡착시키는 등 항종양/항암활성을 보이는데 이는 tumoricidal immunocite의 활성화에 의한 것으로 추정되고 있다. 키틴/키토산의 생체활성은 분자크기, 탈아세틸화도, 유도체의 종류 및 적용방법 등에 따라 차이를 보이기 때문에 키틴/키토산을 기능성 식품으로서 폭넓게 이용하게 위해서는 용도에 맞는 적절한 규격 설정이 요구되고 있다.