• Journal of the Korean Chemical Society
• /
• v.17 no.2
• /
• pp.115-121
• /
• 1973

Crystalline products were obtained when$TiCl_4$ was reacted in dichloromethane with acetic, propionic, crotonic, benzoic, furoic and salicylic acids. Chemical analysis has shown that these were all dichlorodicarboxylatotitanium (IV). Cryoscopy of dichlorodipropionatotitanium (IV) indicated the carboxylato-complexes are dimeric. In the IR spectra of these complexes two strong bands both assigned to asymmetric carbonyl stretching vibration have been observed in the region$1500 - 1700cm^{-1}$ and the NMR spectrum of dichlorodipropionatotitanium (IV) has also shown two triplets and two quartets, which indicate that there are two chemically unequivalent carboxylato-ligands in the dimer $[TiCl_2(OOCR)_2]_2$. Their molecular structure was proposed to be bis-carboxo-bridged dimer.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.214-214
• /
• 2003

고체 고분자 전해질에 대한 연구는 1979년 wright와 Armand에 처음 시작된 이래로 지난 20여년간 연구가 계속적으로 지속되고 있다. 전지의 적용되기 위해 전해질이 갖추어야 할 조건중에 이온전도도가 상온에서 10-4 S/cm 이상의 전도도를 나타내야 하지만 지금까지 연구되고 있는 여러 고체 고분자 전해질은 이런 조건을 만족시키지 못하고 있는 실정이다. 본 연구에서는 이런 상온에서의 이온 전도성을 향상시키기 위해 여러 종류의 실리카와 세라믹 계열의 첨가제를 첨가하여 이온전도성의 향상을 꾀하고자 하였다. 본 연구에서는 고체 고분자 전해질의 host polymer로써 분자량 400,000 의 Polyethylene oxide를 사용하였으며 Lithuim salt로는 Lithium (bisperfluroethylsulfonyl)imide(3M)를 기본적으로 사용하였다. 여기에 가소제의 역활로써 (3-cyanopropyl)methylsiloxane cyclics를 첨가하였고 표면그룹이 CH3와 OH기로 이루어진 기능성 나노 실리카를(<11nm)이용하여 함량별 전기 화학적 특성 및 기본 물성을 측정하였다. 기본적으로 이 네 가지 물질을 유기용매 Acetonitril에 잘 용해하여 Solid Casting방법으로 80-100 마이크로의 복합고분자 전해질을 제조하였다. Homogeneous하고 uniform한 필름 제조하기 위해 9$0^{\circ}C$에서 열처리를 24h 동안 실시하였다. 제조되어진 복합고분자전해질은 XRD를 통하여 결정성을 조사하였고 DSC를 이용하여 유리 전이온도 및 결정화도를 조사하였다. 복합고체고분자의 전기화학적 성질을 평가하기 위해 blocking electrode를 제작하여 임피던스 스펙트로 스코피를 이용하여 이온전도성을 측정하였다. 또한 복합 고분자 전해질의 온도의존성에 대해서도 조사하였다. 또한 실제 전지의 작동구간에서의 전해질의 안정성을 확인하기 위해 LSV를 측정하였고. Li metal을 사용하여 non-blocking electrode를 제작하여 복합고분자 전해질과의 계면저항을 측정하였다.

• Microbiology and Biotechnology Letters
• /
• v.31 no.2
• /
• pp.165-170
• /
• 2003

Hot water extracts of Chlorella capsulata(CCE) is a biological response modifier (BRM) which exhibits neuronal differentiation activity. The effect of CCE on the growth of nerve cells, PC12 was observed as follows: The viable cell density in adding CCE was increased up to 2.5 times, compare to that in no addition. The neurite of the cells was also lengthened up to 40 $\mu\textrm{m}$ longer than 5 $\mu\textrm{m}$ in no addition. The number of neurite-bearing cells were about four times higher than that in no addition.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.538-544
• /
• 1996

A highly viscous biopolymer from alkali-tolerant Bacillus sp. was purified and its rheological properties were studied. 1% (w/v) solution of purified biopolymer showed pseudoplastic fluid behavior with the yield stress similar to those of xanthan and guar gum, and its consistency index was exponentially dependent on concentration and temperature. The concentration dependency of consistency index exhibited two rectilinear plots with different slopes at 1% concentration and pseudoplastic property increased with the increase of biopolymer concentration. The biopolymer solution exhibited a low temperature dependency and the activation energy of flow was 1.16 kacl/g mol. The apparent viscosity was very dependent on the change of pH and the addition of salt. However, no organic solvent effects were observed effects of viscosity synergism with the addition of viscosifier were not observed.

• Journal of Food Hygiene and Safety
• /
• v.33 no.6
• /
• pp.516-520
• /
• 2018

Bacteriocin is a proteinaceous compound produced by microorganisms showing antimicrobial activities. In this study, the physicochemical properties of the bacteriocin produced by Enterococcus faecium CJNU 2008 strain were characterized. Partially purified bacteriocin showed stabilities against heat treatments at $100^{\circ}C$ for 30 min and $121^{\circ}C$ for 15 min and against solvents treatments such as methanol, ethanol, acetone, acetonitrile and chloroform. The bacteriocin also exhibited stabilities against lipase and ${\alpha}-amylase$ treatments but the stability was abolished at protease treatment, indicating that the antimicrobial agent from E. faecium CJNU 2008 was a proteinaceous bacteriocin. The bacteriocin also showed bactericidal mode of action against Listeria monocytogenes. The molecular mass of the bacteriocin was estimated to be under 6.5 kDa by a tricine-SDS-PAGE analysis. The bacteriocin was purified by HPLC. Further studies toward biochemical analysis of the bacteriocin are needed in near future.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.461-468
• /
• 2000

To investigate the antigenotoxicity of Korean mistletoe using Comet assay, the crude extract was divided into 4 fractions, i.e. fraction I (MW range over 14,000), fraction II $(8,000{\sim}14,000)$, fraction III $(3,500{\sim}8,000)$, and fraction IV (below 3,500) by molecular weight fractionation. In the non-tumoral 3T3 cells, fraction IV could reduce DNA damage induced by MNNG in a dose dependent pattern while fraction I and III which were known to contain lectins and viscotoxins, respectively, did not show the activity. By heat treatment, the antigenotoxic activity of faction IV, though was gradually diminished according to heating time, was found to be maintained significantly. From the Sephadex G-25 gel filtration chromatography, a more purified fraction responsible for the activity of faction IV was obtained from the latter part of total elute. Therefore, it was concluded that the antigenotoxic components of Korean mistletoe were water soluble substances of MW below 1,000 and there is a possibility of utilization as a material of functional foods for chemoprevention.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.927-933
• /
• 2022

We synthesized (C₁₀H₈N₂H)₂Cr₂O₇, The structure of the product was characterized with FT-IR(infrared) and elemental analysis. The oxidation of benzyl alcohol by (C₁₀H₈N₂H)₂Cr₂O₇ in organic solvents showed that the reactivity increased with the increase of the dielectric constant. The oxidation of alcohols was examined by (C₁₀H₈N₂H)₂Cr₂O₇ in DMF, acetone. As a resuit, (C₁₀H₈N₂H)₂Cr₂O₇ was found as efficicent oxidizing agent that converted benzyl alcohol, allyl alcohol, primary alcohol and secondary alcohols to the corresponding aldehydes or ketones(65%~95%). The selective oxidation of alcohols was also examined by (C₁₀H₈N₂H)₂Cr₂O₇ in DMF, acetone. (C₁₀H₈N₂H)₂Cr₂O₇ was selective oxidizing agent(15%~95%) of benzyl alcohol, allyl alcohol and primary alcohol in the presence of secondary ones. In the presence of DMF solvent with acidic catalyst such as H₂SO₄. (C₁₀H₈N₂H)₂Cr₂O₇ oxidized benzyl alcohol(H) and its derivatives. The Hammett reaction constant(ρ) was -0.69(308K). The observed experimental data were used to rationalize the hydride ion transfer in the rate determining step.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.193-199
• /
• 1998

The mixtures of ultra-high molecular weight polythylene (UHMWPE), high density polyethylene (HDPE), process oil (mineral oil) and potassium hexatitanate whisker were melted and mixed at $150^{\circ}C$ for 30min, and prepared by compression molding to the specimen of separator of about $200{\mu}m$ thickness at the same temperature and 5000 psi. Thereafter the pores were formed by extracting process oil with organic solvents. In this study, the range of PR (the ratio polymer to process oil) was varied from 0.1 to 0.5 because the specimen turned into rubbery phase at which PR was below 0.1 whereas it changed into gel phase at which PR was above 0.5. When the specimen was treated with nonpolar organic solvents, process oil was extracted nearly 98%. Tensile strength was $31kg/cm^2$ at PR = 0.426, and resistance of specimen was $37m{\Omega}/cm^2$ at PR = 0.186, and $53m{\Omega}/cm^2$ at PR = 0.426. The $N_2$ adsorption-desorption isotherm showed a hysteresis representing regions of capillary condensation, and the surface area at PR = 0.186 was relatively large as $130cm^2/g$. Potassium hexatitanate whisker was randomly dispersed in between PE layers. It might be that the whisker is intercalated through the PE thin layers oriented by compression.

• Clean Technology
• /
• v.12 no.4
• /
• pp.191-197
• /
• 2006

Polymerization in supercritical carbon dioxide has been getting attention since it is easier to separate the remaining reactants from product polymer and since it is a cleaner process that produces neither wastewater nor air pollutants, compared to the conventional polymerization processes. In this study, poly(vinyl acetate) (PVAc) that is necessary in producing poly(vinyl alcohol) (PVA) with a lot of industrial applications was manufactured in the presence of supercritical carbon dioxide for the second time in the world. A poly(dimethylsiloxane)(PDMS)-derivative surfactant and three initiators were employed in the polymerization of vinyl acetate (VAc) at 338.15 K and 34.5 MPa. Investigation was carried out to find out the effect of the amounts and types of initiators and surfactants as well as the effect of reaction time on the yield and the molecular weight of PVAc. The weight average molecular weight (Mw) of PVAc was in the range of 60,000 ~ 140,000 g/mol, and the number average molecular weight was in the range of 30,000 ~ 70,000 g/mol. The yield of PVAc was spread over 10 ~ 80%, based on the amount of VAc monomer.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.589-598
• /
• 2002

thiathlophene (EDiTT) was synthesized. The yield of the synthesis was about 29%. The monomer was identified by using NMR, IR and UV/Vis spectroscopic methods. Poly (3,4-ethylenedithiathiophene) (PEDiTT) was prepared using this monomer and FeCl$_3$. The deep blue green color of the product was changed into brown color by the reduction with $N_2$H$_4$. This was soluble to common organic solvents. Spectroelectrochemistry was used to characterize the PEDiTT. NMP was the best solvent for PEDiTT. PEDiTT/NMP solution was used for making SAM type thin film of the polymer on gold electrode. Electrochemical and IR spectroscopic methods were used to identify the thin film.