• Korean Journal of Food Science and Technology
• /
• v.47 no.1
• /
• pp.6-12
• /
• 2015

This study was performed to determine the optimal hydrolysis conditions for the production of hydrolysates, including water-soluble dietary fiber from Chinese cabbage, with commercial enzymes. The optimal pH and temperature for hydrolysis of the hemicellulose fraction were pH 5.0 and $40^{\circ}C$, and optimal enzyme concentrations were 45 units and 21 units for Shearzyme plus and Viscozyme L, respectively. The yields of the hydrolysate including the water-soluble dietary fiber from the hemicellulose fraction by Shearzyme plus and Viscozyme L were 22.64 and 24.73%, respectively, after a 72 h reaction. The molecular weight distribution of alcohol-insoluble fiber was characterized by gel chromatography; degradation of hemicellulose increased with increasing reaction time. Our results indicate that the hemicellulose fraction was degraded to water-soluble dietary fiber by enzymatic hydrolysis, and its hydrolysate could be utilized as new watersoluble food materials.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.130-137
• /
• 2008

In this study cadalene, which is classified into sesquiterpenes constructed with 15 carbons of naphthalene skeleton, was isolated from ethanol extracts of Zelkova wood (Zelkova serrata) using successive silica gel column chromatography. The purified cadalene compound was subjected to structural analysis using HPLC, EI-MS and $^1H$, $^{13}C-NMR$. Its molecular weight was measured to 244 (m/z) and methyl and isopropyl group were attached at C1 and C4 position, as well as hydroxyl group at C7 and methoxyl group at C3 in the naphthalene skeleton, respectively. Yield of 7-hydroxy-3-methoxycadalene amounts to 0.03% based on air dried Zelkova wood powder. It was distributed only in xylem tissues(only in heartwood) of Zelkova wood, not in leaves and bark.

• Journal of the Korean Chemical Society
• /
• v.42 no.5
• /
• pp.512-518
• /
• 1998

In this study, various thermodynamic and hydrodynamic parameters characterizing the solution properties of polyethylene ionomer particles in water were determined at $30^{\circ}C$ by means of light scattering and viscosity measurements. Based on the experimental data, we investigated the solution behavior of three kinds of polyethylene ionomers, which are different in composition of the pendant ionic groups of COOK, COOH and $CONH_{2}$, and characterized their particle properties. Ionomers containing 7.6 mol% potassium salt only behave as flexible coils in a relatively good solvent state. On the other hand, two ionomers containing 3.8 mol% amide group together with potassium salt form the compact particles. In addition, the concentration dependence of the effective diffusion coefficient $(D_{eff})$ and the reduced viscosity of the latter ionomers showed the opposite trend from the former, indicating that the composition of the pendant ionic groups have a great influence on the interparticle interaction of ionomers formed in water.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.813-822
• /
• 1996

In order to reduce carbon dioxide, one of the major greenhouse gases, a new type of copolymer, poly(alkylene carbonate) has been synthesized. The alternating copolymers have been obtained from carbon dioxide and various epoxides with zinc carboxylate as a catalyst. The number-average molecular weight of the polymer is about 50,000 and polydispersity is rather broad(5~10). The polymers are amorphous, and glass-clear materials that exhibit unusually facile and clean thermal decomposition behavior. Complete decomposition with no carbon residue is observed at elevated temperature even in an inert atmosphere. Terpolymers with bulkier epoxides improve the physical properties of the copolymer with simple epoxides. The decomposition properties of the polymer provide versatile applications such as ceramic, metal, and electronic binders and lost-foam casting. Further application of the polymer for the barrier film or the plasticizer will be investigated.

• Membrane Journal
• /
• v.17 no.1
• /
• pp.67-79
• /
• 2007

Uniform microcapsules containing ionic model drugs were prepared by controlling various conditions of emulsification procedure using a lab-scale membrane emulsification system with a SPG (Shirasu porous glass) tubular membrane. We observed the effects of various emulsification parameters [concentration and molecular weight of polycaprolatone (PCL) polymer, transmembrane pressure and emulsifier concentration in disperse phase and continuous phase, stirring speed] on the mean size and size ditribution of microcapsules containing lidocaine hydrochloride (cationic drug), sodium salicylate (nonionic drug) and 4-acetaminophen (anionic drug) used as a model drugs. Also, release characteristics of a model drugs from PCL microcapsules were investigated. Controlling membrane emulsification parameters, uniform PCL microcapsules with about $5\;{\mu}m$ of the mean size were finally prepared. The release rate and the burst effect of microcapsules were decreased in condition of the acidic solution, but it was increased in condition of the base solution.

• Journal of Applied Biological Chemistry
• /
• v.53 no.3
• /
• pp.174-178
• /
• 2010

Calcium and iron binding peptides were prepared by enzymatic hydrolysis and ultrafiltration of rice bran protein (RBP), which was isolated from defatted rice bran by phytase and xylanase treatment and ultrasonication. The isolated RBP had a molecular weight in the range of 10-66 kDa. The extracted proteins were hydrolyzed using Flavourzyme for 6 hr. After ultrafiltration under 5 kDa as molecular weight, the peptides were fractionated into 4 peaks by Sephadex G-15 gel permeation chromatography, and each fraction was determined for calcium and iron binding activity. As the result, Fl and F2 fractions were the best candidate for calcium and iron chelation, respectively. These results suggest that the calcium and iron binding peptides can be used as functional food additives in food industry.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.482-482
• /
• 2013

반도체 소자의 미세화와 더불어 세정공정의 중요성이 차지하는 비중이 점점 커지고, 이에 따라 세정 기술 개발에 대한 요구가 증대되고 있다. 기존 세정 기술은 화학약품 위주의 습식 세정 방식으로 표면 손상, 화학 반응, 부산물, 세정 효율 등 여러 가지 어려움이 있다. 따라서 건식세정 방식이 활발하게 도입되고 있으며 대표적인 것이 에어로졸 세정이다. 에어로졸 세정은 기체상의 작동기체를 이용하여 에어로졸을 형성하고 표면 오염물질과 직접 물리적 충돌을 함으로써 세정한다. 하지만 이 또한 생성되는 에어로졸 내 발생 입자로 인해 패턴 손상이 발생하며 이러한 문제점을 극복하기 위하여 본 연구에서는 가스클러스터 장치를 이용한 세정 특성 평가에 관한 연구를 수행하였다. 가스 클러스터란 작동기체의 분자가 수십에서 수백 개 뭉쳐 있는 형태를 뜻하며 이렇게 형성된 클러스터는 수 nm 크기를 형성하게 된다. 그리고 짧은 시간의 응축에 의해 수십 nm 크기까지 성장하게 된다. 에어로졸 세정과 다르게 클러스터가 성장할 환경과 시간을 형성하지 않음으로써 작은 클러스터를 형성하게 되며 이로 인해 패턴 손상을 최소화 하고 상대적으로 높은 효율로 오염입자를 제거하게 된다. 클러스터 세정 장비를 이용한 표면 처리는 충돌에 의한 제거에 기반한다. 따라서 생성 및 가속되는 클러스터로부터 대상으로 전달되는 운동량의 정도가 세정 특성에 영향을 미치며 이는 생성되는 클러스터의 크기에 종속적이다. 생성 클러스터의 크기 분포는 분사 거리, 유량, 분사 각도, 노즐 냉각 온도 등의 변수에 관한 함수이다. 따라서 본 연구에서는 $CO_2$ 클러스터를 이용한 세정 특성을 평가하기 위하여 이러한 변수에 따라서 오염 입자의 종류, 크기에 따른 PRE (particle removal efficiency)를 평가하고 다양한 선폭의 패턴을 이용하여 손상 실험을 수행하였다. 제거 효율에 사용된 입자는 $CeO_2$와 $SiO_2$이며, 각각 30, 50, 100, 300 nm 크기를 정량적으로 오염시킨 쿠폰 웨이퍼를 제조하여 세정 효율을 평가하였다. 정량적 오염에는 SMPS (scanning mobility particle sizer)를 이용한 크기 분류와 정전기적 입자 부착 시스템이 사용되었다. 또한 패턴 붕괴 평가에는 35~180 nm 선폭을 가지는 Poly-Si 패턴을 이용하였다. 실험 결과 클러스터 형성 조건에 따라 상대적으로 낮은 패턴 붕괴에서 95% 이상의 높은 오염입자 제거효율을 전반적으로 보이는 것을 확인할 수 있었다. 따라서 이론적 계산에 기반하여 세정에 요구되는 클러스터 크기를 가정하고, 이를 통하여 세정에 적용할 경우 높은 기존 세정 방법의 단점을 보완하면서 높은 세정 효율을 가지는 대체 세정 방안으로 이용할 수 있음을 확인하였다.

• Microbiology and Biotechnology Letters
• /
• v.34 no.2
• /
• pp.115-120
• /
• 2006

Enzymatic hydrolysis of silk fibers were investigated for the preparation of soluble silk peptides by ten food-grade proteases from Bacillus, Aspergilius, and plant sources. Silk fibers were dissolved for 1 hr in a 2:1 cosolvent (50% $CaCl_2$: ethanol) by heating at $90^{\circ}C$. The silk solution was filtered to remove Impurity particles and desalted for 50 hours by a dialysis process to remove the used cosolvent. When the silk hydrolysis was performed at $45^{\circ}C$ for 2 hours, most proteases from Bacillus and Aspergillus generated large amounts of insoluble aggregates. On the contrary, proteases from plant sources produced much less aggregates during prolonged incubations and also exhibited high hydrolysis activities. In regards of the solubility and broad molecular sizes of produced silk peptides, Bromelain was finally selected and applied for the enzymatic hydrolysis of silk fibers.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.4
• /
• pp.313-317
• /
• 2006

To prepare oligouronic acids from high-molecular-weight alginates, sea tangle (Laminaria japonica) alginates were hydrolyzed at various pHs for 1 hr at 80$^{\circ}C$. The effects of hydrolysis pH (HpH) on the average molecular weight (AMW) and MW distribution ratios (DRs) in the hydrolyzed alginates were investigated. As HpH decreased, the DRs of the alginates with MW>500 kDa and MW=300-500 kDa decreased exponentially, while it increased exponentially for MW<50 kDa. For MW=100-300 kDa, DR increased exponentially as HpH fell from 5.0 to 3.5, and then decreased exponentially. Similarly, for MW=50-100 kDa, DR increased exponentially as HpH increased to 1.0 from 5.0, and then decreased exponentially. As HpH decreased, the MW cutoff size and AMW of alginates fraction with the highest DR were decreased. For HpH 4.5 and 5.0, the MW cutoff size with the highest DRs was MW=300-500 kDa; the DRs were 28.9 and 32.6%, respectively; and the AMW of both was about 400 kDa, for HpH 3.5 and 4.0, the cutoff size was MW=100-300 kDa; the DRs were about 28%: and the AMWs were both about 200 kDa. For HpH 3.0, the cutoff size was MW=50-100; the DR was 29.0%; and the AMW was 73 kDa. For HpH values below 2.0, the MW cutoff size with the highest DRs was MW<50 kDa, and all of the AMWs were below 28 kDa.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.6
• /
• pp.565-571
• /
• 2000

Mixed primers based on the high sequence homology of selected regions of known connexins (Cxs) was used for PCR reaction. A full-length connexin cDNA of sweetfish (Plecoglossus altivelis) was cloned by rapid amplification of cDNA 5'and (5'RACE) and 3'RACE method. When compared to other known Cx sequences, homology of sweetfish Cx cDNA to Atlantic croaker, Mycropogonias undulatus Cx32.7, bovine, Bos taurus Cx44 and Atlantic croaker Cx32.2 were $63.8{\%},\;61.6{\%}\;and\;56.7{\%}$, respectively. This cDNA encoded 308 amino acids (35,028 dalton) and named as sweetfish Cx35. Hydropathicity analysis of predicted amino acid sequences indicated that sweetfish Cx35 have four major hydrophobic regions and four major hydrophilic regions, suggesting its topology is similar to that of known Cxs. The presence of a tfical Cx consensus sequences were identified in each of the extracellular loops (first loop and second loop).