• Analytical Science and Technology
• /
• v.22 no.3
• /
• pp.210-218
• /
• 2009

A gas chromatography-tandem mass spectrometry (GC-MS/MS) method was developed and validated for simultaneous determination of amphetamine derivatives and norketamine in human hair. Preparation of hair involves external decontamination, mechanical pulverization, incubation and extraction prior to instrumental analysis. The samples were derivatized using heptafluorobutyric anhydride, and analyzed by GC-MS/MS. The linear ranges were 0.05-20.0 ng/mg for the analytes except for 3,4-methylenedioxyamphetamine, with good coefficients of determination ($r^2$ >0.998). The intra-day and inter-day precisions were within 10.7% and 8.5%, respectively. The intra-day and inter-day accuracies were between -1.6 and 17.0% and -2.6 and 10.5%, respectively. The limits of detections for each analyte were lower than 0.007 ng/mg, while recoveries were 75.9-100.9%. When the method was applied to hair samples obtained from suspected drug abusers, the concentrations in hair samples were 0.97-19.30 ng/mg for methamphetamine and 0.14-2.56 ng/mg for amphetamine.

• Food Science and Preservation
• /
• v.14 no.2
• /
• pp.148-153
• /
• 2007

The chemical components of flesh persimmon flowers (petal and calyx), and the qualify of hot-water extracts (teas) prepared from powders of these flower parts, were investigated In flesh petal and calyx, the contents of moisture, crude protein, crude lipid, and carbohydrate were 84.8% 0.4% 0.3% and 13.7% respectively. The values were not significantly different when the two tissues were compared. In petal and calyx respectively, the crude ash values were 0.5% and 1.1% of flesh weights, the vitamin C content were 192.3mg% and 392.7ng%, the flavonoid levels were 98.4 mg% and 355.2mg% and the carotenoid content were 0.8mg% and 3.8mg%. Hot air and freeze drying methods applied to petals, prior to powder preparation, did not affect the levels of soluble solids or soluble annins. Extract from calyx had higher L values, higher ${-\alpha}$ values, more soluble tannins, greater 1,1-diphenyl-2-picrylhy-drazylradical-scavenging activities, me lower pH values, than did exracts from petal. Fructose and glucose were higher in petal extract than in calyx extract, but sucrose was higher in calyx extracts. Extract of freeze-dried powdered petals had significantly higher free sugar levels than did exracts from petals dried with hot air. The major organic acids in extracts were citric acid, oxalic acid, and malic acid. The levels of organic acids were inversely related to free sugar levels in all flower parts and after all drying methods tested. Sensory tests of aroma, taste and overall acceptability yielded scores above medium for all teas, regardless of the flower part powdered, or the drying method used. The results show that the petal and calyx of persimmon may be used to make tea and perhaps other foods.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.2
• /
• pp.65-71
• /
• 2018

Paper packs, glass bottles, metal cans, and plastic materials are classified according to packaging material recycling groups that are Extended Producer Responsibility (EPR). In the case of waste paper pack, the compressed cartons are dissociated to separate polyethylene films and other foreign substance, and then these are washed, pulverized and dried to produce toilet paper. Glass bottle for recycling is provided to the bottle manufacturers after the process of collecting the waste glass bottle, removing the foreign substance, sorting by color, crushing, raw materializing process. Waste glass recycling technology of Korea is largely manual, except for removal of metal components and low specific gravity materials. Metal can is classified into iron and aluminum cans through an automatic sorting machine, compressed, and reproduced as iron and aluminum through a blast furnace. In the case of composite plastic material, the selected compressed product is crushed and then recycled through melt molding and refined products are produced through solid fuel manufacturing steps through emulsification and compression molding through pyrolysis. In the recycling process of paper packs, glass bottles, metal cans, and plastic materials, the influx of recycled materials and other substances interferes with the recycling process and increases the recycling cost and time. Therefore, the government needs to improve the legal system which is necessary to use materials and structure that are easy to recycle from the design stage of products or packaging materials.

• Journal of Animal Environmental Science
• /
• v.13 no.2
• /
• pp.129-138
• /
• 2007

A natural deodorizing agent (NDA) was made using pine cone byproduct, and its effects on malodor emission and composting were analyzed in this study. NDA was manufactured by mixing pine cone byproduct with three species of microorganisms and water containing mineral nutrients and molasses, and then by incubating for 48 hours at $30^{\circ}C$. Lab scale experiments were done with three treatment groups, T1 (control, sawdust treatment), T2 (microorganisms and sawdust treatment group), and T3 (NDA and sawdust treatment group). During composting, temperatures reached over $55^{\circ}C$, a minimum temperature for the inactivation of pathogenic microorganisms. No differences were found in physicochemical composition of compost among treatments. However, it was observed that over usage of NDA could obstruct temperature increase, since the biodegradation rate of organic matter of NDA was relatively low, Nitrogen loss due to ammonia gas emission, which normally happens during composting, was reduced by using NDA, and hence the nitrogen level of final compost was higher in T3 than in others. During experiment, it was found that ammonia gas emission was entirely lasted through compositing duration, but the $CH_3SH$ and $H_2S$ gases were produced only at early stage of composting. The ammonia concentration trapped in $H_2SO_4$ solution during 31 days of composting in T1, T2 and T3 was 12,660mg/L, 11,598mg/L and 7,367mg/L, respectively, showing distinguishable reduction of ammonia gas emission in T3. The emissions of $CH_3SH$ and $H_2S$ gases were also remarkably reduced in T3. Based on these obtained results, usage of the deodorizing agent made with pine cone byproduct could reduce the emission of malodor during composting, without any deterioration of compost quality.

• Journal of Korean Society of Forest Science
• /
• v.45 no.1
• /
• pp.62-67
• /
• 1979

Ultraviolet microscopy of ultrathin sections of wood has proved to be one of the useful means for determining the lignin distribution in the various regions of the cell wall. Also, spectral approach and quantitative analysis of isolated compound middle lamella fraction from birch xylem have revealed that the lignin associated with the vessel secondary wall and middle lamella is composed predominantly of gualacylpropane units. Lignin deposited in the fiber and ray parenchyma secondary walls is composed mostly of syringylpropane units. The middle lamella lignin around fibers and ray cells contains both guaiacyl and syringyl propane quits. On the basis of the results above, this research was carried out to clarify the origin of milled wood lignin (MWL) by analysing the chemical characteristics of ML MWLs extracted at various milling stages. The amount of phenolic hydroxyl-, ${\alpha}$-carbonyl-, and methoxyl-group in the MWL's increases the milling time. And progressive mining contributes to the merease of ratio of syringylaldehyde to vanillin(S/V ratio) after nitrobenzene oxidation of MWL. Accordingly, It could be concluded that milled wood lignin extracted at the initial milling stage derives from compound middle lamella region of cell wall, whereas, with progressive milling, lignin of secondary wall of fiber is introduced gradually to milled wood lignin. These results are suggesting that heterogeneous chemical structure of lignins in hardwood exists. Although milled wood lignin at the initial stage seems to have lower molecular weight in comparison with milled wood lignin extracted at final milling stage from the result of Gel-filtration curves, further study would be required on molecular weight distribution of milled wood lignin in future.

• Food Science of Animal Resources
• /
• v.29 no.5
• /
• pp.627-632
• /
• 2009

The objective of this study was to investigate the supplementation effect of selenium on beef color stability. A total of 15 Hanwoo steers were divided into 3 groups and 2 groups were administered with 0.9 ppm of one of two organic-selenium products, Organic-Se and Se-SMC (Se-spent mushroom compost) for 4 mon. The third group was the control group, which was not with fed selenium during the same period. The result of this study showed that there was no significant difference in meat color between the control and treatments when Hunter $L^*$, $a^*$, $b^*$, chroma, hue and total color difference (${\Delta}E$) were measured after 30 min of blooming. When the oxymyoglobin (OxyMb) contents were measured after beef samples were ground and stored for 48 h at $20^{\circ}C$ in an incubator, they were 26.04%, 28.52% and 33.78% for the control, Organic-Se and Se-SMC after 14 d of storage and 12.65, 18.98 and 18.72 after 21 d of storage at $4^{\circ}C$, respectively (p<0.05). The control had a significantly higher metmyoglobin (MetMb) content than Organic-Se and Se-SMC (p<0.05). This result indicated that selenium supplementation was effective in preventing the oxidation of myoglobin(Mb) and production of MetMb and thus was able to maintain the purplish fresh red color of the meat.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.385-390
• /
• 1998

The effect of agglomeration treatment was examined to prevent the parched cereal powder from clumping when it is blended with water. Parched cereal powder was composed of 66.9% carbohydrate, 7% water, 12.1% crude protein, 12.1% crude fat and 1.9% ash, respectively. Particle size of parched cereal powder was generally enlarged by agglomeration treatment. This phenomenon was confirmed by particle size analyzer and microscopic observation. The color of agglomerated sample was shown to be slightly darker than the untreated sample. The water absorption indices of agglomerated samples which were steamed for 2min and re-dried were significantly increased as compared with the untreated sample. The water solubility indices of agglomerated samples showed generally lower values than those of untreated samples. In views of quality and processing time, the optimum condition of agglomeration treatment for manufacturing well-dispersable parched cereal powder in water was 15min re-drying after 2min steaming. It is concluded that the agglomeration treatment improves the dispersibility of parched cereal powder and thus facilitates the intake of it after mixing with water.

• Korean Journal of Poultry Science
• /
• v.8 no.1
• /
• pp.7-14
• /
• 1981

The experiment using Anake broiler strain chicks was conducted to study the effort fungistatic agents on microbial counts, Ins of nutrient, growth rate and feed efficiency of the broiler. Feed was adjusted to 12% and 15% moisture level during hot and high humidity season and sorbic acid at the level of 0.02%, 0.04% and Ca-propionic acid at the level 0.1% 0.2% was added. The results obtained were as follows. 1, The Addition of fungistatic agents could slightly reduce mold and yeast counts. The highest effect on inhibition of mold and yeast counts was observed for the addition of sorbic acid at 0.04% level to the fled contained 15% moisture. 2, Approximately 14% starch loss of ground corn was observed from the fred contained 15% moisture and the loss could be diminished to 3-7% by the addition of fungistatic agents with the superior effect of sorbic acid to Ca-propionic acid. 3. Approximately 15% fat loss was detected when high moisture fled was und and this was reduced to 7% by the addition of 0.04% sorbic acid to the feed. 4. Significantly higher growth rate (p＜0.05) during starter period was observed for low moisture feed added by sorbic acid compared with that for high moisture diet without fungistatic agents or with Ca-propionate at the level of 0.1%. 5. Significantly lower feed efficiency (p＜0.05) during starter period of high moisture feed without fungistatic agents was observed; hower no significant different response was detected by either moisturer level of kinds and levels of fungistatic agents used. 6. Significantly higher growth rate (p＜0.05) during finisher period of lower moisture feed with 0.04% sorbic acid was observed compared with that of high moisture fled without fungistatic agents or the feed added by 0.1% Ca-propionate level. 7. Significantly higher feed efficiency (p＜0.05) during finisher period of low moisture feed added by sorbic acid 0.02% or 0.04% level was found compared with that of high moisture feed without fungistatic agents and low moisture feed added by Ca-propionate at the level of 0.1% or 0.2%. 8. Mort bacteria, mold and yeast were observed in the ceca than in small intestine. The. moisture content of dict had no effect on intestinal microfloral counts. However, numbers of mold and yeast of intestine could slightly be reduced by fungistatic agents administration. 9. Nothing but encephalomalacia to chicks fed feed contained 15% moisture without addition of fungistatic agents was observed. In conclusion, addition of either sorbid acid at 0.04% level and Ca-propionate at 0.2% level to high moisture feed or reduced moisture level to 12% could be con-sidered more effective to enhance growth rate and fled efficiency of broilers during summer period.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.504-509
• /
• 2018

The purpose of this study was to manufacture a high-performance titanium yellow pigment. Anatase type $TiO_2$ was the skeleton of the pigment and $Sb_2O_3$ is used as the color assistant for the coloring agent, $Cr_2O_3$. Mixed raw materials for the pigment were $TiO_2$(98%), $Sb_2O_3$(99.5%), and $Cr_2O_3$(99.5%). The raw materials were mixed by a dry process and crystallized by calcination at $1,000{\sim}1,200^{\circ}C$. The crystalline material was pulverized in a Jar Mill under $1{\mu}m$ by a wet process and dried for 12 hours at $100^{\circ}C$. The pigment was finally made by a fine grinding process. To determine the best temperature for calcination, 4 temperature sections ($1000^{\circ}C$, $1100^{\circ}C$, $1150^{\circ}C$, and $1200^{\circ}C$) were set up. The X-ray diffraction peak of the rutile crystalline structure was highest at $1,150^{\circ}C$. The yellow ceramic pigment, which has the rutile structure, was applied for coating materials. The synthesized pigments underwent a discoloration tests on the acid resistance, alkaline resistance, weather resistance and heat resistance. In addition, a detection test on harmful heavy metals ($Cr^{+6}$) was done. The resulting values (${\Delta}E$) of the weather resistance test (2000hr), acid resistance test, alkaline resistance test, and heat resistance test were 0.74, 0.16, 0.07 and 0.29. The resulting value for heavy metals testing was 34ppm.

• The Korean Journal of Food And Nutrition
• /
• v.22 no.3
• /
• pp.321-331
• /
• 2009

In this study, Salvia miltiorrhiza Bunge(Danshen) powder was extracted with ethanol, and its antimicrobial activity was investigated. The ethanol extract of the Danshen had antimicrobial activity against Bacillus subtilis, Escherichia coli, and Staphylococcus aureus. The inhibition zones of the Danshen extract(3 mg/disc) against B. subtilis, E. coli and S. aureus were 13, 12 and 8.5 mm, respectively. To test the food preservation effect of Danshen and determine the optimal ratio of the Danshen extract in a formulation, Sulgidduk samples were prepared with substitutions of 0, 0.25, 0.5, 0.75 and 1% Danshen extract, and then their quality characteristics were investigated over 4 days of storage. According to the results, total cell counts showed a decreasing trend with an increasing amount of added Danshen extract. Moisture contents were not significantly different among the Sulgidduk samples. As the content of Danshen extract increased, the L-values of samples decreased and the a- and b- values increased. For the textural characteristics, the hardness, gumminess, and chewiness of the Sulgidduk samples decreased as the amount of Danshen extract increased; however, they increased with the progression of storage time. In the sensory evaluation, the control group had significantly higher scores for color, flavor and after-taste as compared to the Danshen extract-added groups. With increasing Danshen extract contents, flavor and overall acceptability decreased, while Danshen flavor, bitterness and off-flavor increased. Chewiness was not significantly different among the samples. In conclusion, the results indicate that substituting 0.5% Danshen extract in Sulgidduk is optimal for quality and provides a product with reasonably high overall acceptability.