• Horticultural Science & Technology
• /
• v.33 no.2
• /
• pp.268-275
• /
• 2015

We evaluated the effect of mixed liquid fertilizer (MLF) on growth responses of plants and soil chemical properties. To do so, a pot experiment with cherry tomatoes (Lycopersicon esculentum var. cerasiforme) using loam soil was conducted for 81 days in a temperature-controlled glasshouse, and four N fertilization treatments were laid out in a completely randomized design with three replicates: control (C), chemical fertilizer treatment (CF), and two rates (MLF-0.5 and MLF-1.0) of MLF treatment. Soils were periodically sampled and analyzed for pH, EC, total N, inorganic N and total C, and growth characteristics of cherry tomatoes were measured. During the experimental periods, the pH of MLF soils was higher than that of CF soils. Soil total-N content increased right after CF-application and ultimately decreased to the level of the control (C) soil, while MLF-application slightly increased the level of soil total-N and this level remained unchanged throughout the experiment. The levels of soil inorganic N content increased after application of CF or MLF, but the initial increase disappeared in 56 days after transplanting (DAT). The dry weight of shoots and roots increased in CF or MLF plants, while the number of fruit increased only in MLF plants. Whereas soluble solid contents were higher in MLF plants than in the other (C and CF) plants, the titratable acidity was not different among treatments. However, no consistent effect of N treatments on major elements of the organs of cherry tomatoes was found. The amounts of N taken up by plants were 0.91 g for CF, 0.61 g for MLF-1.0, 0.43 g for MLF-0.5, and 0.25 g for control treatments, resulting in greater N efficiency for CF than for MLF.

• Korean Journal of Ecology and Environment
• /
• v.45 no.4
• /
• pp.356-367
• /
• 2012

Community structure of fish and inhabiting status of endangered species, Cobitis choii and Gobiobotia naktongensis were investigated in the Ji Stream, a tributary of the Geum River Drainage System of Korea from May to October 2011. Ten to 23 fish species inhabited upper stream (St. 1~St. 4) with a Aa-Bb river type composed of mostly pebble and cobble bottoms, 16~28 species did middle stream (St. 5~St. 7) with a Bb type composed of mostly cobble and boulder bottoms, and 20-29 species did lower stream (St. 8~St. 10) with a Bb-Bc type composed of mostly sand bottoms. A total of 44 species belonging to nine families were found in the stream during the survay. The dominant species were in the order of Zacco platypus (37.2%), Pungtungia herzi (5.8%) and Pseudogobio esocinus (5.5%). Other abundant species included Acheilognathus lanceolatus (5.3%), Zacco koreanus (5.2%), Hemibarbus longirostris (4.9%) and Squalidus gracilis majimae (3.5%). Among residing species, 16 species were endemic to Korea, two (Cobits choii and Gobiobotia naktongensis) were endangered, and one (Micropterus salmoides) was non-indigenous. The similarity index based on species composition and abundance clearly delineated the fish community of the Ji Stream according to the three major sections, which were defined at the above. Dominance index gradually decreased toward downstream, while diversity, evenness and species richness indexes gradually increased toward downstream. The two endangered species, C. choii and G. naktongensis co-occurred at the lower stream due to the prevalence of a sandy substratum.

• Journal of Bio-Environment Control
• /
• v.17 no.3
• /
• pp.221-225
• /
• 2008

Lilium formolongi 'Fl August' plantlets with scale-leaves and scale-bulb were treated at 10, 15, 20, $25^{\circ}C$ for 15, 30, or 45 days and planted in February, March, April and May. In the April planting, flowering percentage was below 10% and in the May planting no flowering occurred. Sprouting and flowering percentages were lower at the late planting times. Days to flowering of the April planting was 110.8 days compared to 128 days for the February planting. Plant height and numbers of leaves were reduced to 7.2 in May planting, compared to 40.5 leaves in February planting, and almost no flowers emerged in either the April or May plantings. Plantlets exposed to 10 or $15^{\circ}C$ flowered at 80 percent or higher at all treatment durations, but at 20 or $25^{\circ}C$ flowering percentages were lower, with 30% or less in the $25^{\circ}C$ treatment. In the $15^{\circ}C$ treatment days to flowering were less than 100 days, while the number of flowers and flower bud differentiation were greatest in the $15^{\circ}C$ treatment. Cytokinin and auxin were analyzed in bulblets grown at 15, 20 and $25^{\circ}C$. T-zeatin content was three times greater in the $15^{\circ}C$ treatment than at $25^{\circ}C$, but the content of indoleacetic acid (IAA) was less at $15^{\circ}C$ than at 20 and $25^{\circ}C$. In the $15^{\circ}C$ treatment, T-zeatin content was about twice the IAA content in the scale- bulblet. The auxin and cytokinin balance may affect flower bud differentiation. $15^{\circ}C$ with 30 days was most effective for flowering in scale-bulblet and planting of February and March were effective for flowering too.

• Korean Journal of Food Science and Technology
• /
• v.15 no.1
• /
• pp.1-5
• /
• 1983

Large quantities of an ascidian, Styela plicata, are harvested annually as the by-product of oyster culture on the south coastal area in Korea. It has been traditionally favored and consumed because of its peculiar taste and flavor. But no study on its taste compounds has been reported. An investigation on the taste compounds of fresh meat and integument of an ascidian has been carried out by a series of analysis of taste compounds including nucleotides, free amino acids, betaine, TMAO, TMA and total creatinine. The most abundant nucleotides in fresh meat were AMP and IMP. Their contents were $1.2\;and\;0.8{\mu}mole/g$, respectively. The contents of nucleotides and their related compounds in integument show similar tendency as in fresh meat but their quantities were very low as compared with those in fresh meat. Seventy two percentage of the total free amino acids in fresh meat was consisted of proline, alanine, glutamic acid, glycine and serine. They occupied also 82% of the total free amino acids in integument, but the amount of free amino acids in integument was about 1/10 of that in fresh meat. The contents of betaine-N and creatinine-N were 6.1 and 2.1% of the extractive-N in fresh meat, respectively. The amounts of TMAO-N and TMA-N were very low contents in fresh meat and trace in integument.

• Korean Journal of Environmental Agriculture
• /
• v.14 no.1
• /
• pp.15-22
• /
• 1995

This study was carried out to investigate the deposition aspect of acid precipitation in rural area of Chonbuk province by analysis of the chemical components in the precipitation at National Honam Agricultural Experiment Station, RDA in the suburbs of Iri from Jan. to Dec. in 1992. The results are summarized as follows: 1. The frequency of acid precipitation was 82.5% in 1992 and the month of the lowest frequency of 17% was June. 2. The pH range of the most precipitation amount was pH $4.5{\sim}5.0$ of 54.0% and the amount and ratio of the precipitation below pH 4.0 were 9.6 mm and 1.1%, respectively. 3. The seasonal acidity of precipitation was Summer(4.78)>Fall(4.59)>Spring(4.52)>Winter(4.16). 4. The components showed significant correlation with pH value were $SO_4^{2-}$ and $NO_3$ and the equivalence ratio between two components was 2.85 : 1. 5. The order of the major ion concentration in the precipitation was $SO_4^{2-}$>$NH_4^+$>$Cl^-$>$Ca^{2+}$>$NO_3^-$>$Na^+$>$H^+$>$K^+$>$Mg^{2+}$ and the equivalence ratio of total anion to cation was 1.20. 6. Deposition amount of nitrogen ($NO_3-N$ + $NH_4-N$) and potassium ($K_2O$) were 1.19 and 0.53 kg/l0a/year, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.6
• /
• pp.373-379
• /
• 2001

The weathering rates and change of chemical composition of 6 residual Entisols derived from granite, granite-gneiss, limestone, sandstone, shale, amd basalt in Korea were studied. The chemical composition of each profile with parent rocks were determined using XRF with the physico-chemical properties and the morphology of soils. In the A horizons of all the soils except Euiseong series, the content of clay, organic matter and cation exchange capacity(CEC) showed higher than those of C horizon, but bulk density and pH showed lower than C horizon. Clay content in the soil from sandstone was decrease with soil depth, which may caused by the elluriation. In total element analysis. $SiO_2$ was high in the soil from granite. granite-gneiss, sandstone and compare with basalt and limestone. $Fe_2O_3$ and MgO was high in the soil from basalt, limestone and shale compare with granite. granite-gneiss and sandstone. And ignition loss was particularly high in the soil from basalt and limestone. The rate of element loss was higher in base cations(Ca, K, Mg, Na) than Si, Al, Fe in the soils. The concentrations of $TiO_2$ in the A horizon compare with that of the C horizon was due to resulting from losses of other less stable elements existed. Considering with relative rate of each elements in soils, $SiO_2$ and $Al_2O_3$ which originated from sandstone and granite, granite-gneiss, sandstone, shale, and basalt were lost higher than those from lime tone, but loss of basic cations were more in the soil from limestone which may be rapid weathering of calcite. The magnitude of losses of the overall elements were increased in the order of the soils from sandstone and granite ${\gg}$ limestone and shale) granite-gneiss and basalt.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.2
• /
• pp.3-7
• /
• 2014

Purpose SPECT/CT scan to be performed attenuation correction on the basis of CT induce an overestimation of the site due to the beam hardening artifact by metal cover and reduce the images quality. Therefore, this study using a phantom that has been inserted artificial hip joint investigated that effect on the SPECT/CT image causing by metal artifact for varying the parameters of the Attenuation Map. Materials and Methods Siemens Symbia T16 SPECT/CT equipment was used. Artificial hip joint was inserted to SPECT/PET phantom, 17 mm sphere of Bright Streak area in CT image was filled with Tc-99m so that the radiation activity was 8 times compared to background. And then Hot and Background was measured in varying Wide Beam Coefficient on Attenuation Map and RBR (Region to Background Ratio) of Metal and Non-Metal was calculated and analyzed depending on the presence or absence of the hip joint. Results It tended to hot count of Non-Metal and Metal to increase as the value of the manual mode is increased, hot count ratio with the group of both manual mode 0.5 and 0.4 is the best match. Also, in automatic mode, the ratio of RBRNon-Metal and RBRMetal was 1.135, statistically significant difference was not observed in the manual mode 0.5 and 0.4. Conclusion In the automatic mode of Wide Beam Coefficient in attenuation correction map, it was found that it is over-correction by 13.52%, it was possible to minimize the over-correction by the artifact in 0.5 and 0.4 of manual mode. Further studies should be performed in order to apply to a patient with the help of this and it is considered possible to reduce the over-correction by the metal artifact of an artificial hip joint for Hip-Resurfacing Arthroplasty patients, and to improve the diagnostic performance.

• Journal of Chest Surgery
• /
• v.38 no.10 s.255
• /
• pp.680-684
• /
• 2005

Background: With the increasing age of the population, coronary artery bypass grafting in the elderly patients is becoming common. Off-pump coronary artery bypass grafting (OPCAB) has been proven to be less morbidity and to facilitate early recovery. The elderly patients may have benefits by avoiding the adverse effects of the cardiopulmonary bypass. The purpose of this study is to evaluate our results of OPCAB in elderly patients. Material and Method: A retrospective chart review was carried out for 12 patients aged over 80 years who underwent isolated OPCAB from January 2001 and March 2004. Data were collected risk factors for disease, extent of coronary disease, and in-hospital outcomes. Postoperative graft patiency was evaluated in 9 patients by multi-slice computed tomography. Result: Eleven patients had triple vessel disease or left main disease. Four patients were suffered from preoperative CVA, and 4 patients had chronic obstructive pulmonary disease. Two patients had myocardial infarction (MI), among them 1 patient was suffered from pulmonary edema after preoperative MI. There was no perioperative death, perioperative MI, and no ventricular arrhythmia. Also there was no perioperative stroke and renal failure. But there was one deep sternal infection who recovered by treating of muscle flap. Atrial fibrillation was newly developed in 1 patient, but was well controlled by medication. Mean intubation time was $15.9\pm4.4(8\~20hrs)$ hrs and mean ICU stay was $2.9\pm0.8(2\~4 days)$ days. Mean hospital day was $21.6\pm14.3(13\~56 days)$ days. Postoperative mean CK-MS was $11.3\pm14.1\;ng/mL$. Early postoperative graft patency rate was $100\%(24/24)$. Follow-up was completed in all patients. In this time, there was no patients with angina or death. Conclusion: The results of this study suggest that OPCAB reduces morbidity and favors hospital outcomes. Therefore, OPCAB is safe, reasonable and might be preferable operative strategy in elderly patients.

• Korean Journal of Weed Science
• /
• v.17 no.2
• /
• pp.147-156
• /
• 1997

The survey of weed population in apple orchard was conducted to investigate basic information on weed flora and its ecology at 27 locations in 1996. The weed species observed include 7 species of grasses, 60 species of broadleaves and 2 species of sedges, and the ratio of annual weed vs perennial weed was 64 : 36. Major dominant weed species by frequence were Chenopodium album, Capsella bursa-pastoris, Digitaria sanguinalis, Rorippa islandica, Alopecurus aequalis and Erigeron canadensis. While, on the basis of dry weight, the most dominant weeds were C. album followed by E. canadensis, A. aequalis, R islandica and R indica. The dominant weed species in middle-north Kyeongbuk region were C. bursa-pastoris, C. album, R indica and R islandica, were E. canadensis, Persicaria hydropiper, A. aequalis and Arenaria serpylliforia in Chungbuk region and were A. aequalis, E. canadenris and R islandica in Honam region.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2215-2224
• /
• 2013

This study performed empirical analysis to estimate SMEs needs in terms of business support policy by growth stages(start-up growth expansion). The subject is the SMEs in Cheonan and Asan, ChungNam and the results are as follows. First, In the initial start-up stage, management plays a key role in dealing with money, labor force, markets and technology while running the organization is a key role of the management in the expansion stage. Major policies to help SMEs grow includes money provision needed in the start-up stage, domestic marketing assistance and the provision of human resources in the growth stage, and assistance in foreign marketing and R&D in the expansion stage. Second, To achieve markets businesses aim at entering the existing and niche markets in the initial phase, and creating new markets in the growth phase. Third, Labor force for technology, sales and management planning in the start-up stage, marketing in the growth stage, and labor force for production in the expansion stage are core man- power needed. Fourth, Money for technology development, securing land for factories, organizing man power, securing markets and running the company is needed in the initial and growth stages while fund for facility investment is needed to grow in the expansion stage. Five, Regarding technology, the initial stage needs technology related to new product development, renewing existing products, improving the existing manufacturing process or developing new manufacturing process, while the growth stage needs processing techniques, and the expansion stage needs technology for developing new manufacturing process. Sixth, Making supply contracts with conglomerates, SMEs and public institutions, and sales to foreign markets are ways for SMEs to grow sales. Seventh, What SMEs wish to get includes business incubating support, R&D assistance, information exchanges, practical use of the R&D results, merchandising support, help with the land to build factories and custom-made support for management in the foundation stage while the support they want to get in the growth stage and in the expansion stage is training assistance and trial production respectively.