• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.111-120
• /
• 2023

The nucleation mechanism was studied using a calcium ion selective electrode (Ca ISE) to observe the formation of CaCO₃, a representative mineral in the CO2 cycle, and to analyze the effect of the Mg/Ca-ratio and temperature on the formation of pre-nucleation cluster (PNC) and CaCO₃. As a result of the experiment, a small amount of crystal was formed. Energy dispersive X-ray spectroscopy (EDS) was used for surface element analysis, and a field emission scanning-electron microscope (FE-SEM) was used for the morphology analysis of synthesized carbonates. These results showed that various shapes of crystalline CaCO₃ (calcite, aragonite, etc.) were observed for each Mg/Ca ratio and temperature. In addition, the calibration plot obtained from Ca ISE showed information on the formation process of CaCO₃. Our results showed that as magnesium ions interfered with the binding of calcium and carbonate ions and delayed the aggregation between PNCs, the nucleation and formation of CaCO₃ were delayed. On the other hand, the temperature showed an opposite trend as compared to the effect of magnesium under our experimental conditions, indicating that temperature accelerated the formation of CaCO₃. Furthermore, the morphology of CaCO₃ clearly changed according to the Mg/Ca ratio and temperature, and it was confirmed that the two factors are very important for CaCO₃ formation in that they could affect the overall process.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.196-209
• /
• 2022

This study compared and analyzed the spatial division function and role of partitions by comparing the entire space and the spatial changes before and after the installation of partitions in <Donggwoldo>, which was manufactured in the late Joseon Dynasty. As a research method, a set standard was prepared to decompose the space of <Donggwoldo> into a unit space, and the standard was set according to the role and height of the space by classifying it into a main space, sub space, and transition space. Two convex maps were prepared according to before and after the installation of the Panjang, and the values of connectivity, control, and integration, which are spatial syntax variables, were calculated and analyzed. The results of the study are as follows. First, the partition in <Donggwoldo(東闕圖)> did not affect the overall spatial arrangement and control or connection of Donggwol, but the movement and access of space is limited to specific areas. Second, the partition was a facility intensively distributed in Naejeon(內殿) and Donggung(東宮) to be used actively in the way of space utilization. It shows that the unit space increased rapidly due to the installation of the partition. Since the partition was installed in the spaces that were open and under high control in the case of Naejeon(內殿), it helped to secure private spaces as closed ones under low control. On the other hand, for Donggung(東宮), the spaces were compartmented and divided with the partition to guide the movement path through narrow gates of the partition and increase the depth of the space. This helped to create spaces that are free and can be hidden as it increased the number of spaces coming through. Third, In addition to the functions of "eye blocking, space division, and movement path control" revealed in prior research, the partition has created a "space that is easy to control" within a specific area. The installation of the partition reduced the scale through the separation of spaces, but it occurred the expansion of the movement path and space. Also, the partition functioned to strengthen hiding and closure or increase openness as well through space division. This study is significant in that it revealed the value of the spatial control function of panjang through the analysis of spatial control and depth by analyzing the function of the partition with a mathematical model in addition to the analysis and study of the function and role of panjang. In addition, it is valuable in that it has prepared a framework for analysis tools that can be applied to traditional residential complexes similar to palaces by applying space syntax to <Donggungdo> to create convex spaces according to unit space division and connection types of palace architecture and landscape elements.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.1
• /
• pp.18-25
• /
• 2022

Purpose: This study aimed to evaluate the color stability and antibacterial properties of the surface of polyethyl methacrylate (PEMA) resin with zirconia nanoparticles added. Materials and Methods: The control group was pure PEMA resin, and the experiment group was PEMA resin 15 mm in diameter and 2.5 mm in thickness disk-shaped specimens with 2, 4 and 8 w/v% of zirconia nanoparticles added, which were respectively divided into Group Z2, Group Z4, and Group Z8. After analyzing the surface roughness and color stability of the specimens, their antibacterial properties were evaluated using Porphyromonas gingivalis (P. gingivalis). The Statistical analysis was performed using when normality was met in the Shapiro-Wilk test, one-way ANOVA was used to test parameters, and Tukey's test was used as a post hoc test. When normality was not met, the Kruskal-Wallis test, a non-parametric test was used (P < 0.05). Results: The surface roughness measurement found that there was no significant difference between the experimental and control groups. The color stability evaluation showed that the Z2, Z4, and Z8 groups were within the color range of natural teeth. The adhesion of P. gingivalis was evaluated to be significantly reduced in Group Z2 compared to the control group (P < 0.05). In the Z2 group, Z4 group, and Z8 group, dead cells bacteria than the control group were observed. Conclusion: In conclusion, PEMA resin with zirconia nanoparticles added was within the range of natural teeth in color and reduced the adhesion of P. gingivalis.

• Journal of Korean Elementary Science Education
• /
• v.42 no.4
• /
• pp.560-576
• /
• 2023

The purpose of this investigation is to: (1) to derive an improvement factor for inquiry-based simulated teaching-learning in pre-service teacher training programs, and pre-service teachers practice simulated teaching that reflect the improvement factor, (2) to analyze the difference in science intrinsic motivation according to science self-efficacy and inquiry-based simulated teaching-learning experience. To achieve these goals, we recruited five elementary and secondary teachers as experts to help us develop an improvement factor based on expert interviews. Subsequently, third-year pre-service teachers of a university of education participated in our analysis of differences in science intrinsic motivation, according to their level of science self-efficacy and experience with inquiry-based simulated teaching-learning. Our methodology involved applying the analytic hierarchy process to expert interviews to derive improvement factor for inquiry-based simulated teaching-learning, followed by a two-way ANOVA to identify significant differences in science intrinsic motivation between groups with varying levels of science self-efficacy. We also conducted post-analysis through MANOVA statements. The results of our study indicate that inquiry-based simulated teaching-learning can be improved through activities that foster digital literacy, ecological literacy, democratic citizenship, and scientific inquiry skills. Moreover, small group activities and student-centered teaching-learning approaches were found to be effective in developing core competencies and promoting science achievements. Specifically, pre-service teachers prepared a teaching-learning course plan and inquiry-based simulated teaching-learning in seventh-grade in the Earth and Space subject area. Pre-service teachers' science intrinsic motivation analyze significant differences in all levels of science self-efficacy before and after simulated teaching-learning and significant difference in the interaction effect between simulated teaching-learning and scientific self-efficacy. Particularly, group with low scientific self-efficacy, the difference in science intrinsic motivation according to simulated teaching-learning was most significant. Teachers' scientific self-efficacy and intrinsic motivation are needed to improve science achievement and affective domains of students in class. Therefore, this study contributes to suggest inquiry-based simulated teaching-learning reflecting school practices from the pre-service teacher curriculum.

• Journal of the Korean Society of Radiology
• /
• v.18 no.4
• /
• pp.345-353
• /
• 2024

The purpose of this study was to suggest an appropriate collimation size and central X-ray incidence point by analyzing the correlation between the collimation size used in lumbar lateral examination and factors affecting the collimation size. the lumbar lateral examination results of 148 patients suitable for the purpose of this study were analyzed. The measurement method was to set the total horizontal width shown in the image to the size of the irradiation field(collimation) used during the examination. The distance connected vertically from the end of the dorsal field to the apophyseal joint of the third lumbar vertebra(AJD), the distance from the dorsal end of the image field to the center of the body of the third lumbar vertebra(BD), and the distance from the end of the dorsal field of the image to the center of the pedicle of the third lumbar vertebra(PD). The distance was measured. For comparative analysis of the mean values of dependent variables according to gender, age, height, weight, and body mass index, the mean values were compared using the independent samples t test and one-way ANOVA. For post hoc analysis, duncan was used. The correlation between independent and dependent variables was analyzed using Pearson correlation analysis. In this study, statistical significance was set at a p value of 0.05 or lower. The average value of the collimation size during the lumbar spine lateral examination was 252.45 mm, AJD was 102.11 mm, BD was 141.17 mm, and PD was 119.73 mm. The mean values of collimation size, AJD, BD, and PD were larger in men than in women, but statistical significance for the difference in mean values by gender was found only in BD (p<0.05). There was a slight difference in the mean value of each group according to age, but there was no statistical significance (p>0.05). The collimation size and mean values of AJD, BD, and PD according to height, weight, and body mass index differed depending on the independent variables, and the differences were all statistically significant (p<0.05). As a result of the correlation analysis, field size and AJD, BD, and PD showed no correlation with gender and age, a weak positive correlation with height, and a medium positive correlation with weight and body mass index. The results of this study showed that CS was correlated with height, weight, and BMI during lumbar lateral examination. If the entrance point of the central X-ray is moved to the appophyseal joint by considering weight and BMI when adjusting the collimation size in clinical practice, it is expected that the collimation size can be reduced bu about 5%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.2
• /
• pp.281-313
• /
• 1976

To obtain fundamental informations on cotton breeding efficiences for Korea, individual genetic relationships and interrelationships between the agronomic characteristics of Upland cotton were investigated. These experiments were couducted at the Mokpo Branch Station $(34^{\circ}48'N, $ $126^{\circ}23'E$ and altitude of 10m above sea level) from 1969 through 1972. Heterosis, combining ability, dominance and recessive gene action, genetic variance, and phenotypic and genotypic correlation were investigated by $F_1'S$ from an 11-parent partial diallel cross and the segregating $F_2$ and $F_3$ populations of the cross Paymaster times Heujueusseo Trice. The following points resulted from this study, 1. Heteroses for number of bolls per plant and lint yield were significant at 27, 84% and 37.26%, respectively. No other character had significant heteroses. 2. The GCA estimates for all studied characteristics were higher than the SCA estimates. Varieties with high GCA effects were Suwon 1 for earliness, Paymaster and Arijona for high lint percent, and Arijona for long fiber, etc, 3. SCA estimates for lint yield varied widely in crosses with Mokpo 4, Mokpo 6 and Heujueusseo Trice. Those crosses with the highest SCA effects were combinations with large characteristics differences, Example of these crosses are Mokpo 4 times Acala 1517W, Mokpo 4 times D. P. L. and Heujueusseo Trice aud Paymaster. 4. Early-maturing varieties were completely dominant to late-maturing varieties in some combinations while other crosses gave intermediate phenotypes. These results suggest additive genetic action by multi-genes. Heujueusseo Trice, Mokpo 6, and Suwon 1 showed highest degree of dominance for earliness. 5. There were no significant trends for inheritance of weight of boll and 100 seeds weight. 6. Long staple was partially to completely dominant to short staple. Though there were single gene ratios the rate of dominance decreased in the $F_2$ and $F_3$ populations in the cross between the long staple variety Paymaster and the short staple variety Heujueusseo Trice. Diallel cross $F_1$ hybrids showed complicated allelic gene action for staple length. Various dominance degree were shown by varieties. 7. Number of bolls per plant indicated strong over-dominance and small non-allelic additive gene action. 8. Lint Yield was characterized by over-dominance and by multiple non-allelic-gene action. High-yielding varieties were dominant to low-yielding ones. However, the low-yielding variety Heujueusseo Trice showed over-dominance, indicating different reactions according to the varieties and combinations. 9. Broad sense heritability for days to flowering was 34-39% while narrow sense heritability was 11%. Large variations of individual plants caused by Korean climatic conditions cause this situation. Heritability estimates for weight of boll was 30% for broad sense and 22% for narrow sense. 10. Heritability estimates for staple length and lint percent were very high suggesting strong selection effects. 11. Narrow sense heritability estimates for number of bolls per plant was 30% in the diallel cross $F_1$ hybrids and 36% in the $F_2$ population of the special cross. Broad sense heritability was estimated at 67% suggesting that. 12. Heritability estimates for lint yield was low due to high over-dominance in the diallel cross $F_1$ hybrids. Heritability estimates for yield was low in the $F_1$ hybrids but high in the $F_2$ and $F_3$ populations. 13. Phenotypic and genotypic correlations between lint percent and days to flowering and between staple length and days to flowering were high in the $F_1, $ $F_2$ and $F_3$ populations. Late-maturing varieties and individuals had long staple and high lint percent in general. As the correlation between days to flowering and lint yield was extremely low, the two traits were considered independent of each other. Days to flowering and number of bolls per plant were negatively correlated in the $F_3$ population, indicating early-maturing individual plants with many bolls may be readily selected. 14. Phenotypic and genotypic correlations between lint percent and staple length were high in $F_1, $ $F_2$ and $F_3$ populations. Accordingly, long staple varieties were high in lint percent. It was recognized that lint yield and lint percent were positively correlated in the diallel cross $F_1$ hybrids, and lint percent and staple length were positively correlated in the $F_2$ population, indicating that lint percent and staple length affect lint yield. 15. Lint yield was significantly and positively phenotypically correlated with number of bolls per plant in $F_1, $ $F_2$ and $F_3$ populations. A high genotypic correlation was also noted indicating a close genetic relationship. The selection efficiencies for a high-yielding variety can be increased when individual plants with many bolls are selected in later generations. The selection efficiencies for good fiber quality can be enhanced when individuals with long staple and high lint percent are selected in early generations.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.4
• /
• pp.381-395
• /
• 2008

Purpoose: For decades dental implants have been used widely in the field of prosthetic dentistry. However there is confusion when establishing treatment plans in cases where some teeth are remained but an insufficient number of implants can be used due to limited anatomical status and ecomomical problems. Many clinicians have tried to connect natural teeth and implants, and it still has controversy. But, there have been few studies on mechanical analysis of connecting natural teeth and implants with konus telescopic removable partial dentures. The purpose of this study was to analyze the stress distribution of prosthesis, abutment and alveolar bone when teeth and implants were connected with the konus telescopic denture, by means of 3-dimensional finite element analysis. Material and methods: The assumption of this study was that there were 2 mandibular canine (11 mm in length, 4 mm in diameter) and 2 implants(10 mm in length, 4 mm in diameter) which are located in the second premolar region. The mandible, teeth, implants, abutments, and connectors are modeled, and analyzed with the commercial software, ANSYS Version 8.1(Swanson, Inc., USA). The control group used implants instead of natural teeth. 21038 elements, 23544 nodes were used in experimental group and 107595 elements, 21963 nodes were used in control group, Stress distribution was evaluated under 150 N vertical load on 3 experimental conditions - between teeth and implants (Load case 1), posterior to implants (Load case 2), between natural teeth (Load case 3). Results: 1. In all load cases, higher von mises stress value was observed in the experimental group. 2. Maximum von miss stress observed in all load cases and all locations were as follows ; a. 929.44 Mpa in the experimental group, 640.044 Mpa in the control group in outer crown and connector - The experimental group showed 1.45 times high value compared with the control group. b. 145,051 Mpa in the experimental group, 142.338 Mpa in the control group in abutment - The experimental group showed 1.02times high value compared with the control group. c. 32.489 Mpa in the experimental group, 25.765 Mpa in the control group in alveolar bone - The experimental group showed 1.26times higher value compared with the control group. 3. All maximum von mises stress was observed in load case 2, and maxim von mises stress in alveolar bone was 32.489 Mpa at which implant failure cannot occur. 4. If maximum von mises stress is compared between two groups, the value of the experimental group is 1.02 times higher than the control group in abutment, 1.26 times higher than the control group in alveolar bone. Conclusion: If natural teeth and implants are connected with the konus telescopic denture, maximum stress will be similar in abutment, 1.26 times higher in alveolar bone than the control group. With this result, there may be possible to make to avoid konus telescopic dentures where natural teeth and implants exist together.

• Journal of Korean Society of Forest Science
• /
• v.41 no.1
• /
• pp.7-18
• /
• 1979

Almonds are one of the oldest sources of food and oil for man as used the ice cream, candy, roast, salting, chocolate, breads, backed, cookies, and flavoring ect. So, we wish to plant Almond in our country at the most parts of mountains. In this purpose we must be find out of both root stock of more compatibility and new techniques of grafting was rather simples as compared with the many steps of machinary involved today. This investigation has been carried out to reveral compatibility and practical controls of environment effectives involved in the occurence of each difference combination results in interspecific grafting of Almonds on the root stock of Prunus mandshurica and Prunus persica as materials during the 9 months period from March to November in 1978. With these selected scions were 4 varieties of Almond employing as the Hal1's hardy, Nonpareil, and Thompson grafted in the polyethylene green house with almost identical provision made for effective controls of automatical supplying to heating and mistsprayers as the $22{\sim}25^{\circ}C$ of temperature and 70~90% humidity. Following results have been obtained. Those environmental controls were more effective and practical to grafting unions and success by means veneer-grafting at the green house. 1. Hall's hardy Almond grafted on the root stock of Prunus persica was more compatibility than Prunus mandshurica. 2. The survival percentages as follows of the 95.33% of Hall's hardy/Prunus persica and 92.66% of Hall's hardy/Prunus mandshurica. And those were no significant between root stock of both species. 3. The 3 varieties of sweet Almond grafted on the root stock of P. mandshurica. And those were no significant between root stock of both species. 4. And the survival percentages as fellows. Thompson 92.66%, Nonpareil 90.66% and Kapareil 89.33% those grafted on the root stock of Prunus persica. 5. And then the survival percentage of interspecific grafts on the root Prunus mandshurica as follows of the materials of Thompson 89.66%, Nonpareil 87%, Kapareil 85%. 6. The analysis of variance were no significant among the interactions between 3 varieties Almond and 2 species of root stock plants. 7. And the growth of interspecific grafts of the high 161cm, diameter 12.3mm and length of roots 21.5cm growth as the Hall's hardy Almond grafted on the root stock of Prunus persica. 8. The root stock plants of Prunus mandshurica more effected to 6~8 days early developed leafing of scions and dark green colour than the Prunus persica. 9. The identical provision of automatic systems was more effective to graft unions and grafting process. 10. The veneer-grafting method at the green house was more effective and practical method for the mass production of Almond grafts.

• Journal of Chest Surgery
• /
• v.32 no.2
• /
• pp.97-107
• /
• 1999

Background: This study was designed to develop a Korean version of the heparin-coated vascular bypass shunt by using a physical dispersing technique. The safety and effectiveness of the thrombo-resistant shunt were tested in experimental animals. Material and Method: A bypass shunt model was constructed on the descending thoracic aorta of 21 adult mongrel dogs(17.5-25 kg). The animals were divided into groups of no-treatment(CONTROL group; n=3), no-treatment with systemic heparinization(HEPARIN group; n=6), Gott heparin shunt (GOTT group; n=6), or Korean heparin shunt(KIST group; n=6). Parameters observed were complete blood cell counts, coagulation profiles, kidney and liver function(BUN/Cr and AST/ ALT), and surface scanning electron microscope(SSEM) findings. Blood was sampled from the aortic blood distal to the shunt and was compared before the bypass and at 2 hours after the bypass. Result: There were no differences between the groups before the bypass. At bypass 2 hours, platelet level increased in the HEPARIN and GOTT groups(p<0.05), but there were no differences between the groups. Changes in other blood cell counts were insignificant between the groups. Activated clotting time, activated partial thromboplastin time, and thrombin time were prolonged in the HEPARIN group(p<0.05) and differences between the groups were significant(p<0.005). Prothrombin time increased in the GOTT group(p<0.05) without having any differences between the groups. Changes in fibrinogen level were insignificant between the groups. Antithrombin III levels were increased in the HEPARIN and KIST groups(p<0.05), and the inter-group differences were also significant(p<0.05). Protein C level decreased in the HEPARIN group(p<0.05) without having any differences between the groups. BUN levels increased in all groups, especially in the HEPARIN and KIST groups(p<0.05), but there were no differences between the groups. Changes of Cr, AST, and ALT levels were insignificant between the groups. SSEM findings revealed severe aggregation of platelets and other cellular elements in the CONTROL group, and the HEPARIN group showed more adherence of the cellular elements than the GOTT or KIST group. Conclusion: Above results show that the heparin-coated bypass shunts(either GOTT or KIST) can suppress thrombus formation on the surface without inducing bleeding tendencies, while systemic heparinization(HEPARIN) may not be able to block activation of the coagulation system on the surface in contact with foreign materials but increases the bleeding tendencies. We also conclude that the thrombo-resistant effects of the Korean version of heparin shunt(KIST) are similar to those of the commercialized heparin shunt(GOTT).

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1972.03a
• /
• pp.5-6
• /
• 1972

Noise and air pollution, which accompany the development of industry and the increase of population, contribute to the deterioration of urban environment. The air pollution level of Seoul has gradually increased and the city residents are suffering from a high pollution of noise. If no measures were taken against pollution, the amount of emission of pollutant into air would be 36.7 thousand tons per year per square kilometer in 1975, three times more than that of 1970, and it would be the same level as that of United States in 1968. The main sources of air pollution in Seoul are the exhaust has from vehicles and the combustion of bunker-C oil for heating purpose. Thus, it is urgent that an exhaust gas cleaner should be instaled to every car and the fuel substituted by less sulfur-contained-oil to prevent the pollution. Transportation noise (vehicular noise and train noise) is the main component of urban noise problem. The average noise level in downtown area is about 75㏈ with maximum of 85㏈ and the vehicular homing was checked 100㏈ up and down. Therefore, the reduction of the number of bus-stop the strict regulation of homing in downtown area and a better maintenance of car should be an effective measures against noise pollution in urban areas. Within the distance of 200 metres from railroad, the train noise exceeds the limit specified by the pollution control law in Korea. Especially, the level of noise and steam-whistle of train as measured by the ISO evaluation can adversely affect the community activities of residents. To prevent environmental destruction, many developed countries have taken more positive action against worsening pollution and such an action is now urgently required in this country.