• The Journal of the Korea Contents Association
• /
• v.4 no.2
• /
• pp.68-75
• /
• 2004

In this paper, n study a distributed establishment scheme to setup lightpath in WDM/TDM Network considering user traffic characteristics. We propose a GBTA(guaranteed-bandwidth time-slot allocation) algorithm which assigns time-slots according to the requred traffic so that it can utilize given network resources efficiently in RWTA(routing and wavelength time-slot assignment) schemes. We consider traffic specification on the basis of ATM traffic classes. Also, in order to increase link utilization and minimize blocking probability, we extend distributed lightpath establishment protocol based on GBTA algorithm. In order to establish lightpath in distributed WDM/IDM network, we use backward resonation protocol that resewes resource with recent information. We use DOWTns(Distributed Optical WDM/TDM ns) that is extended from NS(Network Simulator), in order to verify proposed GBTA-based optical wavelength routed network.

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.266-271
• /
• 2011

Single-walled carbon nanotube (SWCNT)/Epoxy composites were prepared for improving thermal conductivities and dispersion of SWCNTs in the epoxy matrix. Composites obtained different types of SWCNTs which are pristine and functionalized of the SWCNTs by acid and amine treatments. Three types of SWCNTs were dispersed in diglycidyl ether of bisphenol A (DGEBA) and bisphenol F (DGEBF). Enhanced interaction between functional groups on SWCNT and epoxy resins was evidenced by an improvement in the dispersion of the SWCNTs in the epoxy matrix. Thermal conductivity of composites containing acid SWCNTs were found to be much better than those containing pristine and amine treated SWCNTs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.6
• /
• pp.462-469
• /
• 1988

Choromatic dispersion of single mode optical fibers limits the maximum bit rate in the single mode optical transmission systems. In this paper we calculate chromatic dispersion and dispersion parametes(zero dispersion wavelength, dispersion slope) for concatenated single mode optical fibers form the chromatic dispersion and dispersion parameters of individual single mode optical fibers, and compare theoretical valuse with those measrued by double demodulation method. Calculated values are coincident with measured ones reasonably. The standard deviation is 0.77-1.28nm for zero dispersion wavelength and 0.56-0.75PS/km.nm2 for dispersion slope. The standard deviation of zero dispersion wavelength is inverse proportional to the optical fiber lenght.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.39-40
• /
• 2008

유기용매를 사용한 나노분산체의 경우, 유기용매를 완전하게 제거 것은 극히 어렵다. 이는 유기용매와 유기고분자와의 일부 반응되는 경우가 발생되어 전기적 물성에 영향을 줄 수 있다. 본 연구는 친환경적인 분산기법으로 물리적 분산기법을 제안하는 바이다. 양호한 분산체를 얻기위해 균질한 상태인 마이크로적 분산기법과 층상실리케이트인 층간사이에 고분자인 에폭시분자가 삽입되어 박리가 양호하게 일어나게 하는 나노적인 분산기법을 통시에 적용하여 분산이 훌륭하게 일어나는 경우를 개발하였다. 마이크로적인 분산을 위해 사용된 Homogenizer의 적용속도와 적용시간에서 원형인 Organoclay_10A Powder의 d-spacing이 262%, 263%로 증가되는 결과를 얻었다. 또한 DSC의 유리천이온도 분석에서도 적용시간의 증가에 따라 유리천이온도가 되어 원형에폭시수지에 비하여 $9^{\circ}C$상승된 결과를 얻을 수 있었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.2
• /
• pp.108-115
• /
• 2003

Two types of one-dimensional dispersion-correction scheme are developed to take into account the dispersion effects for the simulation of tsunami propagation using ADCIRC finite element model based on shallow-water equations The first is an implicit scheme, and the dispersion-correction is accomplished by controlling the weighting factor assigned to each spatial derivative term of different time levels. The other scheme is explicit and the dispersion is considered by adjusting the element size. The validity of the dispersion-correction scheme proposed in this study is confirmed through the comparison of numerical solutions calculated using the new schemes with analytical ones considering dispersion effect of waves.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.10
• /
• pp.1525-1531
• /
• 2016

The objective of the present study was to investigate the rheological properties of potato starch cross-linked with different concentrations (0, 0.125, 0.25, and 0.5%, w/v) of cross-linking agents (10 g of adipic acid and 40 g of acetic anhydride). Cross-linked potato starch dispersions showed shear-thinning behaviors (n=0.43~0.63) at $25^{\circ}C$. Apparent viscosity (${\eta}_{a,100}$), consistency index (K), and yield stress (${\sigma}_{oc}$) significantly increased with an increase in the concentrations of cross-linking agents from 0.125 to 0.5% (w/v). Storage modulus (G') and loss modulus (G'') increased, whereas complex viscosity (${\eta}^*$) was reduced with increasing frequency (${\omega}$) from 0.63 to 62.8 rad/s. Magnitudes of G' and G'' for cross-linked potato starch were significantly increased with an elevation in the concentrations of cross-linking agents. G' values of cross-linked potato starches were significantly higher than G'', indicating that the starches had more elastic properties than viscous properties. Cox-Merz rule was not applicable to potato starch dispersions.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.218-218
• /
• 2003

21세기 정보기반사회에서는 정보처리량의 증가로 인한 대용량 정보 교환을 위하여 신호처리의 고속화/광대역화가 요구되어진다. 완전 광통신망의 구축에 의한 대용량의 광통신을 위해서는 고속이며, 집적화가 가능한 저가의 광전자 소자 개발이 필요하다. 광전자 소자 중 전기-광학 변조 효과를 이용한 광소자의 구현을 위한 소재로서 극성 배향된 비선형 광학 유기고분자 소재는 가공성이 뛰어나 원하는 형태의 광도파로로 제조할 수 있다는 장점에 많은 연구가 진행되고 있다. 그러나 아직 전기광학계수의 향상과 더불어 유기고분자가 가지고 있는 열 및 광화학적 안정성이 낮은 기본적인 문제점과 폴링(poling)에 의해 배향된 극성이 시간에 따라 완화되는 문제의 해결이 요구되고 있다. 이러한 문제점 해결을 위한 기초 연구로 유기물을 졸-겔 매트릭스에 나노 사이즈로 분산하는 방법으로 유기물의 내화학적 안정성을 향상하고자 시도하였다. 잘 알려져 있는 바와 같이 유/무기 하이브리드 졸-겔 재료는 광 투광성이 우수하고 저온에서의 재료 합성과 저가 공정이 가능하여 광기능성 유기물의 호스트(host) 재료로 많이 연구되고 있다. 본 연구에서는 MTMS(methyltrimethoxysilane)과 TEOS (tetra-ethoxyorthosilicate)를 0-100 mol%로 혼합하고 가수분해하는 방법으로 친수성/친유성 특성을 제어하여, 분산되는 유기물의 사이즈를 조정하였다. 각 실험 조건에 따른 유기물 분산체의 크기를 SEM 및 TEM으로 관찰하였으며, 나노 사이즈로 분산된 유/무기 졸-겔 코팅막의 광학적 특성을 프리즘 커플러를 이용하여 조사하였다.

• Composites Research
• /
• v.18 no.3
• /
• pp.1-6
• /
• 2005

Carbon nanofiber exhibits superior and of ien unique characteristics of mechanical, electrical, chemical and thermal properties. Despite of the excellent properties of carbon nanofiber, the properties of carbon nanofiber filled polymer composites were not increased largely. The reason is that it is still difficult to ensure the uniform dispersion of carbon nanofiber in a polymer matrix. In this study, for improvement of the mechanical properties of composites, carbon nanofiber reinforced hybrid composites was investigated. For the dispersion of carbon nanofiber. solution blending method using ultrasonic was used. Dispersion of carbon nanoifiber was observed by scanning electron microscope (SEH). Mechanical properties were measured by universal testing machine(UTM).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1B
• /
• pp.27-32
• /
• 2003

This paper presents the Genetic Algorithm based Task Scheduling (GATS) method for the scheduling of programs with diverse embedded parallelism types in Distributed Parallel Systems, which consist of a set of loosely coupled parallel and vector machines connected via high speed networks The distributed parallel processing tries to solve computationally intensive problems that have several types of parallelism, on a suite of high performance and parallel machines in a manner that best utilizes the capabilities of each machine. When scheduling in distributed parallel systems, the matching of the parallelism characteristics between tasks and parallel machines rather than load balancing should be carefully handled with the minimization of communication cost in order to obtain more speedup. This paper proposes the based initialization methods for an initial population and the knowledge-based mutation methods to accommodate the parallelism type matching in genetic algorithms.

• Journal of the Korean Ceramic Society
• /
• v.42 no.2 s.273
• /
• pp.132-139
• /
• 2005

Sintering behavior of $BaO-Nd_{2}O_3-TiO_2$ with a Pb-based glassceramics frit were investigated in order to understand an effect of glassceramics as a low temperature sintering agent on dielectric ceramics. A green sheet form was fabricated through tape casting method with the glassceramic fut added $BaO-Nd_{2}O_3-TiO_2$. The dispersion properties, rheological properties and final density of dielectric composit slurry as a function of amount and composition of organic additives was examined. The dispersants' addition was effective in controlling dispersion of the ceramics in solution. The addition of excessive dispersant showed adverse effect on dispersion. The prepared slurries, containing ceramic : powders, glass-ceramics and various kinds of organic viechles, exhibited typical shear thinning behavior. The best properties of tape casting appeared powder to solvent ratio 65 : 35 and amount of the binder 6 wt$\%$ and plasticizer 3 wt$\%$. The viscosity of the slurry was 677 cps and green/sintered density in the tape was $3.3 g/cm^3,\;5.56 g/cm^3$ respectively.