• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1B
• /
• pp.35-45
• /
• 2009

In this study, a laboratory experiment has been performed on a S-curved channel with two curved sections. In the experiments, effects of 3-D velocity structures on mixing characteristics of tracer material were investigated. As a result, it was clearly noticed that the primary flow travels taking the shortest course of the meandering channel and has a very ununiform distribution at the bends. The secondary cell which was developing at the first bend disappears at the crossover, and then, at the next bend, secondary cell is re-developing in the opposite direction. The experimental results show that mixing of tracer is significantly affected by the combined action of ununiform primary flow and secondary cell. The ununiform primary flow separates the tracer cloud in the longitudinal direction, and the secondary cell further separates the retarding tracer cloud mainly in the transverse direction. As a result, these complex flow structures cause separation and spreading of tracer cloud both in the longitudinal and in the transverse directions. The measured dimensionless transverse dispersion coefficients calculated using 2-D routing procedure ranges 0.012-0.875, and is generally proportional to width to depth ratio (W/h). The predicted values calculated by the theoretical equation overestimate slightly the measured transverse dispersion coefficients.

• Korean Journal of Ichthyology
• /
• v.34 no.3
• /
• pp.201-207
• /
• 2022

Total 418 Yellow Croaker Larimichthys polyactis were examined and the range of total length (TL) was 12.0~27.5 cm and average total length was 19.6 cm. The most important prey component in the diets of L. polyactis was Pisces that constituted 46.5% in %IRI (Index of relative importance). Euphausiacea was the second largest prey component. The result of analysis in ontogenetic and seasonal changes significantly exhibited. The proportion of Pisces increased as increasing body size, whereas the consumption of Macrura decreased gradually. The diets also were different among seasons, with the difference particularly being evident between warm (summer and autumn) and cold (winter and spring) seasons. Permutational multivariate analysis of variance (PERMANOVA) revealed significant dietary differences by seasons (P=0.001).

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.289-298
• /
• 2023

In this study, the development of a self-healing concrete waterproofing agent was examined, focusing on its manufacturing and waterproofing properties. The optimal ratio using microcapsules for the concrete waterproofing agent was determined through assessments of flow, compressive strength, and permeability conducted during the mortar stage. These findings aimed to provide fundamental data for evaluating the self-healing properties of the concrete waterproofing agent designed for use in concrete structures. The self-healing concrete waterproofing agent was comprised of three types of inorganic materials commonly used for repair purposes. From experimental results, a composition ratio with a high potassium silicate content, referred to as SIM-2, was found suitable. A surfactant mixing ratio of 0.03 % was identified to enhance the dispersibility of the concrete waterproofing agent, while a mixing ratio of 0.2 % distilled water was deemed suitable for viscosity adjustment. For the magnetic self-healing concrete waterproofing agent's healing agent, using microcapsules in the range of 0.5 % to 0.7 % met the KS F 4949 and KS F 4926 standards.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.703-714
• /
• 2023

This research conducts a series of tests to investigate the setting retarding properties and strength development in cement pastes incorporating various types and dosages of sugar-based super retarding agents. Six such agents, including Sucrose, Sugar powder, Saccharin, Aspartame, Stevioside, and Mogroside, commercially available, were selected for evaluation. The study also examines the micro-structural properties of these cement pastes. The test mixtures were prepared using a 27.5% water-to-cement ratio and ordinary Portland cement. Micro-structural analyses were conducted using Scanning Electron Microscopy(SEM), X-Ray Diffraction(XRD), and Energy Dispersive Spectroscopy(EDS). The findings reveal that the incorporation of sucrose, sugar powder, and stevioside significantly retards the setting time. Particularly, adding 0.1% sucrose extended the setting time by approximately two-fold compared to the control(Plain) mixture. Most mixtures, barring those with sugar powder and stevioside, exhibited compressive strength comparable to the Plain mixture. Notably, with 0.2% sucrose, strength measurements were not feasible at 1 day, but at 3 days, the strength gains aligned with the Plain mixture. XRD, SEM, and EDS analyses confirmed the hydration delay(set retarding) of C3S due to sucrose, with further quantitative corroboration provided by EDS. SEM was used to verify the presence or absence of hydration products. The study concludes that sucrose, as a sugar-based retarder, offers effective set retarding capabilities and compressive strength development in concrete.

• Land and Housing Review
• /
• v.15 no.1
• /
• pp.39-55
• /
• 2024

The aim of this study is to analyse housing satisfaction among residents of different types of public rental housing-permanent, national, and happy housing-following the integration of housing types upon the full-scale supply of integrated public rental housing. By identifying key factors that influence residential satisfaction, our goal is to inform the planning of public rental housing complexes and derive policy implications. The study focuses on analysing discrepancies in residential satisfaction among residents of different types of public rental housing and comparing the factors influencing this satisfaction. Microdata from the Ministry of Land, Infrastructure, and Transport's 'Housing Situation Survey' in 2021 is utilized for analysis, employing one-way ANOVA and binomial logistic regression methods. Empirical analysis reveals variations in residential satisfaction levels between residents of permanent and national rental housing, with national rental housing residents exhibiting higher satisfaction. The influencing factors of overall condition satisfaction are consistent for permanent and national rental residents but differ for happy housing residents. Additionally, the influencing factors of overall residential environmental satisfaction vary across all three housing types. Nonetheless, common factors across all types include housing noise and facility accessibility, highlighting their significance in complex planning. Subsequent studies may involve time series analysis to assess changes in influencing factors over time.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.6
• /
• pp.835-848
• /
• 2016

The purpose of this study was to find efficient and customized tools for delivering the benefit of health functional foods (HFFs). Delivery tools which could influence the impact of advertising were images, explanations of ingredients, diagrams of health benefit, patents, and comments from authority. Six advertisements were developed using these tools: "A": relevant image + explanation of ingredients + scientific diagram of efficacy; "B": relevant image + explanation of ingredients; "C": relevant image; "D": irrelevant image; "E": irrelevant image + explanation of ingredient + patent; "F": irrelevant image + explanation of ingredient + comments from authority. To analyze the consumer perceptions on HFFs and advertisement effects, 300 respondents were requested to answer a questionnaire comprising of the following questions: 5 questions of attitudes (necessity of HFFs, trust in HFFs, gathering information, watching advertisements and trust in advertisement claims) and 6 questions on the 6 developed advertisements (attention, understanding, sufficiency of information, sympathy, trust, and purchase). Scoring was done as per the 5 Likert scale. There was a higher proportion of females and the elderly, as compared to males and youngsters. The overall consumer attitudes were positive. Explanation of ingredients, scientific diagram of health benefit, patents and expert comments were helpful factors in increasing the advertisement evaluation by consumer, but the images were not. Advertisement evaluation of consumer did not differ with gender and age. However, differences were observed between some of the consumer attitudes (necessity of HFFs, trust in HFFs, gathering information and trust in advertisements claim) and advertisement evaluations (attention, understanding, sympathy and purchase). Our results indicate that for consumers utilizing the HFFs, advertisements with concrete tools such as diagrams, patent, and expert comments are more helpful. However, for consumers who do not have interest in HFFs, the scientific information was irrelevant. We believe that to maximize the effect of health information in advertisements, consumers should be segmented, and customized tools for each segment needs to be developed.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.565-572
• /
• 2001

The spatial genetic structure of Needle fir(Abies holophylla Max.) seedlings on forest gap within a Needle fir forest at Mt. Odae in Korea was analyzed on the basis of ISSR(inter-simple sequence repeats) marker analysis. The gap size was $1,500m^2(50m{\times}30m)$, and we sampled 416 one- or two-year-old seedlings by 2m intervals. Some trees at the upper crown layer except Needle firs and all trees at the middle and lower crown layers were removed, and Needle firs at the upper crown layer showed very weak growth strength or to be withering to death. The results of spatial autocorrelation using 31 polymorphic ISSR markers revealed that it was genetically homogeneous within spatial distance of 15.6m and the randomness of genetic distribution was from 15.6m to 31.2m. The genetic patch size of seedlings in forest gap might be restricted by the density of mother trees, making allow for the average height of adult Needle firs, the seed dispersal area, and the average distance between adults. For the directionality of seedling distribution, we investigated the variography using 'genetic configuration' which was the value of configuration in Multidimensional Scaling by genetic distance. In directional variogram, the increment of spatial distance from East to West direction was inversely proportional to genetic homogeneity. We presumed that this anisotrophy of seedling distribution at this forest gap resulted from the directionality of seed dispersal rather than the difference of fecundity between mother trees or the microhabitat variation, taking the evenness of forest floor condition, a vast seed production and the random distribution of seedlings at the studied site into consideration.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.785-792
• /
• 2005

This study is to examine the influence of defective grain shape of coarse aggregate and lowered fineness modulus of fine aggregate on the characteristics of high flowing concrete. The flow ability and compact ability of high flowing concrete was examined using fine aggregate, varying its fineness modulus to 2.0, 2.5, 3.0, and 3.5, and coarse aggregate with before and after grain shape improvement. Also the influence of fineness modulus of fine aggregate and grain shape of coarse aggregate on dispersion distance of particles of aggregate was examined by relatively comparing the dispersion distance between particles of aggregate. According to the experimental result, minimum porosity when mixing fine aggregate and coarse aggregate was shown in order of fineness modulus of fine aggregate, 3.0, 2.5, 2.0, 3.5, regardless of the improvement of grain shape. So when the fineness modulus is bigger or smaller than KS Standard $2.3\~3.1$, the porosity increased. When the spherical rate of the grain shape of coarse aggregate unproved from 0.69, a disk shape to 0.78 sphere shape, the rate of fine aggregate, which represents minimum porosity, decreased $6\%$ from $47\%\;to\;41\%$. The 28 days compressive strength according to fineness modulus of fine aggregate increased about 3 ma as the fineness modulus increased from 2.0 to 2,5, and 3.0. However, the 28 days compressive strength decreased about 9 ma at 3.5 fineness modulus as compared with 3.0 fineness modulus. The improvement of grain shape in coarse aggregate and increase of fineness modulus in fine aggregate made the flow ability, compact ability, and V-rod flowing time improve. Also the fineness modulus of fine aggregate increased the paste volume ratio when a higher value was used within the scope of KS Standard $2.3\~3.1$.

• Journal of Aquaculture
• /
• v.13 no.4
• /
• pp.339-351
• /
• 2000

Optimal environmental conditions, that sustained fastest growth, lowest mortality and abnormality of the scallop Patinopecten yessoensis, were identified from field experiments undertaken at Chumunjin during 1991-1998. Temperature within the water column 10~30 m depth ranged between 5 and 23$^{\circ}C$; high temperature and daily fluctuation resulted in growth retardation and heavy mortality of the scallop. Optimal salinity range was between 31.5 and 34.5%0 and water transparency 6.0 and 18.1 m, which was significantly affected by phytoplankton density. Chlorophyll concentration ranged between 0.04 and 3.51 f.lgfL. Low temperature and high chlorophyll concentration appear to support faster growth of the scallop. Optimal periods of transplantation for intermediate culture were between mid July and early November: cultured under high density during July-August as a first step and under low density during mid September through early November as a second step. Optimal stocking density in square net cage (<35${\times}$35 em) for intermediate culture was 30-40 individuals per cage for main culture using lantern net and 80 -100 individuals of the size of 1.5 ~ 3.0 em shell height per cage for sowing culture. During the intermediate culture, the highest growth was realized, when the cage was held at water depth between 10 and 15 m. Water depth below 25 m, however, was best to avoid mass mortality during the periods of abnormally high water temperature and high variation of water temperature. The daily growth rate during the intermediate culture was between 0.019~0.381 mm; low in January and February but high in March and April. It is suggested that the main culture is commenced before June under low stocking density to avoid the possibility of mass mortality during summer by high water temperature.

• Journal of Animal Environmental Science
• /
• v.18 no.1
• /
• pp.45-56
• /
• 2012

This study was conducted to give basic information of the animal manure management by manure units determination for recycling farming in Cheorwon-gun. Manure units (MU) are used in the permitting, registration, and the environmental process because they allow equal standards for all animals based on manure nutrient production. An MU is calculated by multiplying the number of animals by manure unit factor for the specific type of animal. The manure unit factor for MU determination was determined by dividing amounts of manure N produced 80 kg N/year. Conversion to manure units is a procedure used to determine nutrient pollution equivalents among the different animal types. In this study, the manure unit factor based on nitrogen in Hanwoo, dairy cow, pig were 0.36, 0.8 0.105, respectively. The analysis of manure unit per ha shows that the N loading by MU is quite different by region. The nitrogen loading of manure unit (MU) per ha of cultivated land was the highest in the Galmal-eup on province with 2.4 MU/ha, which is higher than the appropriate level. The Seo-myeon province came next with 1.92 MU/ha. To be utilized as a valid program to build the recycling farming system, diverse measures shall be mapped out to properly determine manure units, evaluate N-loading and to properly manage their nutrient balance of each region.