• Journal of ILASS-Korea
• /
• v.4 no.3
• /
• pp.8-14
• /
• 1999

The characteristics of the breakup process in supercritical spray is investigated during the injection of supercritical sulfur hexafluoride into dissimilar gases at supercritical pressures and subcritical temperature of the injected fluid. The visualization techniques used are backlighting and shadowgraph methods. The spray angles are measured and the breakup and mixing process are observed at near and supercritical conditions. The results show that spray angles are decreased with the in..ease of the ratio of density $(\frac{\rho_f}{\rho_g})$. At the supercritical temperature, the spray angles in atomization region are kept nearly constant such as the typical spray angle in gas injection. The mixing process is changed radically at the temperature where $\frac{d\rho}{dT}=\frac{1}{2}[\frac{d\rho}{dT}]_{max}$ at given pressure.

• Journal of ILASS-Korea
• /
• v.12 no.3
• /
• pp.154-159
• /
• 2007

Spray tip penetration and spray angle for one main injection were measured at the atmospheric condition with the fuel injection pressure of 270 bar and 540 bar. It investigates an effect of different nozzle hole geometry of conventional cylindrical one and those of elliptical ones. Injection period represented by injector pulse drive was fixed at 1ms. From the result of this study, it is shown that spray tip penetration becomes shorter and spray angle becomes wider with the elliptical nozzle hole geometry due to fast break-up of a fuel liquid column.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.10
• /
• pp.786-791
• /
• 2002

An experimental study on the behavior of the water hold-up by spraying of a fin-and-tube heat exchanger with regard to the surface characteristics, i.e., contact angles, was conducted. The dynamic contact angles (DCA) were measured, and water hold-up by spraying (WHS) was conducted in the experiment. It is found that heat exchanger surface characteristics, spray pressure, spray water temperature and heat exchanger surface temperature play an important role in WHS. In order to evaluate relationship between WHS and surface characteristics, test conditions are determined through a contour analysis. A correlation was proposed to predict WHS as a function of DCA. With its test efficiency and consuming time, the prediction method can be used to evaluate WHS performance.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.1-9
• /
• 1993

디젤 엔진의 연소 과정에서 흡입공기와 분사된 연료의 최적 혼합기 형성이 배기성분, 연료효율 등 엔진의 성능을 향상시키는데 있어 매우 중요한 과제중의 하나이다. 이를 위하여 연료분무 현상에 대한 연구와 더불어 연소실내 공기유동 현상에 대한 연구가 주요 관심대상이 되어왔다. LDV를 이용한 3-D 유속측정 및 각종 CFD Code를 이용한 유동해석등의 방법으로 엔진 실린더 내부의 유동현상을 이해하는데 많은 도움이 되고 있으나 아직도 엔진연소실설계 등 엔진 개발에 있어서는 종래의 방법에 의한 실린더내 와류 강도의 비교평가에 크게 의존하고 있으므로 여기서는 디젤 엔진의 와류를 측정 평가하는 방법으로 Paddle Wheel회전을 이용한 Paddle Wheel식 Swirl Meter방식과 실린더내 흡입공기의 각 운동량을 측정하는 Impulse식 Swirl Meter 방식에 대해 고찰하고자 한다.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.45.3-46
• /
• 2009

홀 추력기는 비교적 간단한 구조와 작은 크기 및 높은 연료효율로 미래 소형위성의 핵심기술로 주목 받고 있다. 이 연구실에서는 2010년 발사예정인 과학기술위성 3호에 탑재할 소형위성용 저 전력 홀 추력기를 연구 개발하였다. 성능에 가장 큰 영향을 미치는 자기장 구조는 FEMM전산코드를 이용한 해석을 통해 설계되었으며, 제작된 프로토타입의 실험을 통해 자기장의 세기 및 모양, 양극전압 및 기체유량에 따른 성능 특성을 관찰하였다. 또한 Faraday Probe와 Retarding Potential Analyzer (RPA), 랑뮈어 탐침 등을 이용해 이온빔의 분사각도 및 전류밀도, 이온에너지 분포, 플라즈마 전위 등을 측정하고 관찰된 특성을 물리적으로 분석하였다. 이러한 최적화 과정을 통해 설계된 비행모델의 시험 결과 양극전력 200 W, 제논 연료유량 0.85 mg/s 을 통해 11.2 mN 추력, 1350 s 비추력, 37% 추력효율을 획득하여 개발목표를 상회하는 만족할만한 결과를 얻었다.

• Journal of the Korean Society of Safety
• /
• v.18 no.2
• /
• pp.28-33
• /
• 2003

The present study investigates the effect of injection angle of water mist on fire suppression characteristics by numerical simulation. In order to validate the temperature field by numerical simulation, the predicted results are compared with experimental data. It shows that the temperature difference between measurements and predictions are within $10^{\circ}C$. Numerical simulations of fire suppression are performed for 4 different injection angle($60^{\circ}$, $90^{\circ}$, $^120{\circ}$, and $180^{\circ}$). The global mean temperature over the fire compartment decrease with increasing of spray angle. The result shows that the heat transfer between droplets and gas phase are enhanced with the increasing of spray angle. Near the fire source, temperature field by the wide spray angle is slightly higher than that of narrow injection angle because of direct cooling of fire source.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.4
• /
• pp.43-52
• /
• 1994

I investigated experomentally the spray characteristics to the operating conditions and the shapes of internal mixing twin fluid atomizer. The wide variations of air per liquid ratio are conducted to predit the influences of the Sauter mean diameter(SMD), spray angle, distribution of drop size, the flowing condition of gas and length, flowing, area of gas and liquid, and diameter, number and place of the orifice. In this experiment, air per liquid raio, mixing chamber length per diameter, orifice diameter, and the flowing area ratio of gas and fluid influences greatly on SMD, spray angle, distribution of drop size and intermittent fluctuation region.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.39-44
• /
• 2011

This study constructed the spray distribution by the Tomography method at high pressure condition. The constructed spray distribution was compared with the images by Indirect Photography method so that the spray size was confirmed and took the boundary of the distribution. It was confirmed that the Tomography applies to construct the distribution at high pressure.

• Journal of ILASS-Korea
• /
• v.27 no.1
• /
• pp.42-49
• /
• 2022

Flash boiling occurs in a couple of modern engineering systems and understanding its mechanism is important. In this experimental study, discharge coefficient of flash boiling spray from simple orifice nozzle was measured, and backlight imaging was acquired at injection pressure to 6.0 bar and temperature to 163℃ for the purpose. Pressurized water by pump was used for working fluid and was heated by electric heater and ejected through simple orifice nozzle diameter of 0.5 mm. High speed camera with long distance microscope was used for backlight imaging in two FoV having magnification of 3.3 and 0.64. The decrease of discharge coefficient according to degree of superheating and evolution of flash boiling spray imaged at various pressure and temperature were explained by the pressure field inside the injector.

• Annual Conference of KIPS
• /
• 2023.11a
• /
• pp.128-129
• /
• 2023

해당 논문은 라즈베리파이를 이용한 온실의 온습도 자동제어 시스템에 관한 연구를 다룬다. 이 시스템은 특정 작물에 대한 최적의 생육환경 제공을 위해 자동으로 온도 및 습도를 측정하고 조절한다. 관리자는 수동으로도 각 기능을 제어할 수 있다. 온습도를 제어하기 위한 방법으로 자연환기, 인공환기, 온실내부 물분사, 열선작동의 방법을 사용한다. 자동화된 온습도 제어 시스템으로 농산물의 생산량 및 품질을 늘림과 동시에 온실 관리에 투자되는 자원을 줄일 수 있어 농업인들의 농업경쟁력을 향상시킬 수 있다.