• The Journal of the Petrological Society of Korea
• /
• v.7 no.3
• /
• pp.161-176
• /
• 1998

There are exposed Samrangjin Tuff and intracaldera intrusions, of which rhyolitic rocks emplaced as postcollapsed central and ring intrusions within the Samrangjin caldera, and fine-grained granodiorite and biotite granite as regional tectonic intrusions nearby. The Samrangjin Tuff and the rhyolitic rocks are of a single Samrangjin magmatic system. Flow-banded rhyolite among rhyolitic rocks was emplaced in the outer part of the ring intrusions, rhyodacite in the inner part of the eastern ring, and porphyritic dacite and dacite porphyry in the inner part of the northwestern ring. Totally the Samrangjin Tuff and the rhyolitic rocks range from rhyolite to dacite in chemical composition. The Rb-Sr isotopic data of the Samrangjin Tuff and the rhyolitic rocks yield an age of $80.8{\pm}1.5(2{\sigma})$ Ma with the initial $^{87}Sr/^{86}Sr$ ratio of $0.70521{\pm}0.00010(2{\sigma})$. The continuous compositional zonations generally define a large stratified magma system in the postcollapse magma chamber. The Sr isotopic data suggest that the compositional zonations might have resulted from the fractional crystallization of a parental dacitic magma.

• Economic and Environmental Geology
• /
• v.35 no.1
• /
• pp.75-95
• /
• 2002

The Andong pluton in the Andong Batholith is composed of comagmatic plutonic rocks, in which the lithofacies comprise hornblende biotite tonalite in the central paft biotite granodiorite in the marginal paft and porphyritic biotite granite at the topside (noJthea~tern paft) of the pluton. The pluton is petrographically and petrochemically zoned, having more mafic center than margin and topside. Distribution pallern of the lithofacies represents a reverse zoning in the pluton. Modal and chemical data in the pluton show progressive and gradual compositional variations from the centrer via the margin to the topside. Quartz and K-teldspar increase toward the topside of the pluton, whereas hornblende, biotite and color index increase toward the center. The bulk composition in the pluton is also reversely zoned, with high $Si0_2$ and $K_{2}O$ in the topside facies, and high MnO, CaO, $Ti0_2$, $Fe_{2}O_{3}$t, MgO and $P_{2}O_{5}$ in the central facies. The reverse zoning is also evident in higher Cr. V, Ni, Sc and Sr of the more mafic tonalite in the interior. The reversely zoned pluton results from remobilization (resurgence) of the lower more mafic compositional zone into the upper more felsic zones of the pluton modified by thennogravitational diffusion and fractional crystallization. In the initial stages of evolution, the pluton was a petrochemical system that fonned chemical compositional zonation with mafic tonalitic magma in the lower. granodioritic one in the middle and granitic one in the upper paft of the magma chamber. Periodic influxes of more mafic magma from the ba~e resulted in mingling of liquids and redistribution of minerals, and may have triggered the remobilil.ation of the lower compositional zone into the upper more felsic zones.

• The Journal of the Petrological Society of Korea
• /
• v.19 no.1
• /
• pp.67-87
• /
• 2010

This article deal with petrotectonic setting and petrogenesis from petrography and chemical analyses of the Cretaceous volcanic and intrusive rocks in the Cheolwon basin. The volcanic rocks are composed of basalts in Gungpyeong Formation, Geumhaksan Andesite, and rhyolitic rocks (Dongmakgol Tuff, Rhyolite and Jijangbong Tuff), and intrusive rocks, Bojangsan Andesite, granite porphyry and dikes. According to petrochemistry, these rocks represent medium-K to high-K basalt, andesite and rhyolite series that belong to calc-alkaline series, and generally show linear compositional variations of major and trace elements with increase in $SiO_2$ contents, on many Harker diagrams. The incompatible and rare earth elements are characterized by high enrichments than MORB, and gradually high LREE/HREE fractionation and sharp Eu negative anomaly with late strata, on spider diagram and REE pattern. Some trace elements exhibit a continental arc of various volcanic arcs or orogenic suites among destructive plate margins on tectonic discriminant diagrams. These petrochemical data suggest that the basalts may have originated from basaltic calc-alkaline magma of continental arc that produced from a partial melt of upper mantle by supplying some aqueous fluids from a oceanic crust slab under the subduction environment. The andesites and rhyolites may have been evolved from the basaltic magma with fractional crystallization with contamination of some crustal materials. Each volcanic rock may have been respectively erupted from the chamber that differentiated magmas rose sequentially into shallower levels equivalenced at their densities.

• Journal of Science and Technology Studies
• /
• v.18 no.3
• /
• pp.153-216
• /
• 2018

The contemporary practices of Big-Data based automated decision making algorithms are widely deployed not just because we expect algorithmic decision making might distribute social resources in a more efficient way but also because we hope algorithms might make fairer decisions than the ones humans make with their prejudice, bias, and arbitrary judgment. However, there are increasingly more claims that algorithmic decision making does not do justice to those who are affected by the outcome. These unfair examples bring about new important questions such as how decision making was translated into processes and which factors should be considered to constitute to fair decision making. This paper attempts to delve into a bunch of research which addressed three areas of algorithmic application: criminal justice, law enforcement, and national security. By doing so, it will address some questions about whether artificial intelligence algorithm discriminates certain groups of humans and what are the criteria of a fair decision making process. Prior to the review, factors in each stage of data mining that could, either deliberately or unintentionally, lead to discriminatory results will be discussed. This paper will conclude with implications of this theoretical and practical analysis for the contemporary Korean society.

• Journal of the Korean Ceramic Society
• /
• v.37 no.10
• /
• pp.933-937
• /
• 2000

고기능성 전자재료용 TiO$_2$분말 및 박막제조에 사용되는 중간생성물인 TiCl$_4$는 99% 이상의 고순도가 요구된다. 고순도.미립의 TiO$_2$분말 및 TiCl$_4$는 황산법으로 제조한 저순도 TiO$_2$원료를 사용하여 염소화법으로 Ti-염화물 및 염화불순물로 제조한 후, 대부분의 염화불순물들은 3단계 과정을 거쳐 고순화 하였다. 대부분의 염화불순물은 분리.응축 및 분별증류로, VOCl$_3$는 mineral oil을 첨가하여 비등점을 변화시켜, 그리고 미량의 염화불순물은 열가수분해하여 침전시킨 후 유기용제 처리하여 제거하였다. 유기용제 처리는 TiO$_2$분말의 고순도화에 도움이 되었으며, 입자간의 응집을 적게 하여 TiO$_2$입자크기도 작아졌다. 또한 anatase에서 rutile 결정구조로의 전이온도도 낮아지는 부수적인 효과를 보였다.

• Journal of Korean Society of Rural Planning
• /
• v.16 no.1
• /
• pp.63-71
• /
• 2010

지난 수십 년 동안 형태지수는 패치의 복잡성을 정량화하여 생물종 다양성 보존과 같은 경관생태계획에 활용되어 왔다. 지역계획 연구자들이나 정책결정자들에게 경관구조와 패턴을 정량화하는 경관생태지수는 대상지역을 모니터링할 수 있는 하나의 수단으로 활용되어 왔다. 그러나 경관생태지수관련 연구를 살펴보면 연구 목적 및 범위에 따라 활용하는 경관생태지수의 종류가 매우 다양하고 복잡한 것을 알 수 있다. 또한 연구목적에 적합한 경관생태지수를 선정하는 것은 복잡한 수학분석과 함께 많은 주의가 필요한 것을 알 수 있다. 따라서 본 연구에서는 형태지수들을 도시지역, 도시외곽지역, 농촌지역 그리고 산림지역 등 4군데 사례지역에 적용하여 그 결과를 통해 형태지수들의 특성을 살펴보았다. 그 결과, 평균형태지수값(MSI)에서는 도시외곽지역이 가장 높게 나타났고, 평균프랙텔차원지수(MPFD)에서는 농촌지역이 높게 나타났다. 넓은 면적을 가진 패치에 가중점을 고려한 평균형태지수값(AWMSI)과 평균프랙텔차원지수값(AWMPFD)에서는 산림지역이 가장 높게 나타났다. 사용한 네 가지 형태지수값의 순위가 4군데 사례지역에서 다르게 나타났다. 특히 둘레와 면적의 로그전환을 이용하고 있는 프랙텔차원지수들의 경우, 도시와 도시외곽지역의 MPFD값은 같고, 도시외곽지역, 농촌지역과 산림지역의 AWMPFD값 차이는 적어 순위 분별력이 떨어졌다. 따라서 넓은 면적을 가진 패치에 가중점을 고려한 평균형태지수(AWMSI)가 지역별 산림패치의 복잡성을 잘 정량화할 수 있음을 본 연구결과에서 보여주고 있다.

• Journal of KIISE:Software and Applications
• /
• v.28 no.9
• /
• pp.681-687
• /
• 2001

In order to raise a class discrimination power by combining multiple classifiers under the Bayesian decision theory, the upper bound of a Bayes error rate bounded by the conditional entropy of a class variable and decision variables obtained from training data samples should be minimized. Wang and Wong proposed a tree dependence first-order approximation scheme of a high order probability distribution composed of the class and multiple feature pattern variables for minimizing the upper bound of the Bayes error rate. This paper presents an extended high order product approximation scheme dealing with higher order dependency more than the first-order tree dependence, based on the minimization of the upper bound of the Bayes error rate. Multiple recognizers for unconstrained handwritten numerals from CENPARMI were combined by the proposed approximation scheme using the Bayesian formalism, and the high recognition rates were obtained by them.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.4
• /
• pp.293-311
• /
• 2021

The volcanic rocks that make up Yeongdo island, an administrative district located on the southern coast of Busan, are composed of andesitic and rhyolitic rocks. Andesitic rock is mainly composed of volcanic breccia has a phenorysts of plagioclase and contains rock fragments. The rhyolitic rock is composed of volcanic angular rock at the base of Mt. Bongnae, and welded tuff forms the main mass of Mt. Bongnae. The fiamme structure can be easily observed with the naked eye, and the higher the altitude, the weaker the welded structure develops and the less the amount of rock fragments and crystals constituting the welded tuff. It is indicated that the magma that formed this study area is related to the tectonic environment of the continental margin related to subduction, and that it erupted after undergoing fractional cystallization at the same time with some contaminant in the continental crust. As a result of analyzing the main elements by altitude, it is believed to be the result of mixing at least 4 times or more of magma batches.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.3
• /
• pp.159-165
• /
• 1997

This paper presents the optimum dimension of 89 ton class stow-net vessel with stern-fishing. The model of basic design is developed by using the optimization techniques referring to objective function and numerous constraints as follows; speed, fishing quantity, fishing days, catch per unit effort(CPUE), and weight/ratio of main dimensions, etc. Thus, the basic design of stow-net fishing vessel is built up by using the optimization of the design variables called the economic optimization criteria, and the objective function represents the criterion which is cost benefit ratio(CBR). The main conclusions are as follows. 1. S/W for decision of optimum hull size is developed in 89 ton class stow-net fishing vessel which is constructed with optimization of the design variables called the economic optimization criteria. 2. For optimum ship dimensions in 89 ton class stow-net fishing vessel, the hull dimensions can be obtained in the range of L= 27.3m, B = 6.6m, D = 2.80m, Cb = 0.695, T/D = 0.80, $\Delta$(displacement)=281.7ton with 10 knots.

• Economic and Environmental Geology
• /
• v.19 no.2
• /
• pp.97-107
• /
• 1986

The Cretaceous Imog granite is a calc·alkaline, subsolvus monzogranite and shows characteristics of "I-type" and "magnetite·series" granite by mineralogy and chemical composition. Many of the major and trace element characteristic of the Imog granite are consistent with a relationship by fractional crystallization of a basic magma. The primary magma of the granite derived from the subduction of oceanic crust at the destructive plate margin. The granite shows light REE enrichment with (Ce/Yb)N ratios of 7.77~12.55. All the REE patterns show Eu negative anomalies ($Eu/Eu^*=0.69$) in the pluton. The Imog granite at the southwestern part of the Hambaeg basin may be intruded along the tectonic intersections of the E-W and N-S lines such as deep faults and fractures. Radiometric age determination on the granite reveals as $96.7{\pm}2.0Ma$ by K-Ar dating on biotite.