• Journal of Food Hygiene and Safety
• /
• v.29 no.3
• /
• pp.234-240
• /
• 2014

Fluxapyroxad is classified as carboxamide fungicide that inhibits succinate dehydrogenase in complex II of mitochondrial respiratory chain, which results in inhibition of mycelial growth within the fungus target species. This study was carried out to assure the safety of fluxapyroxad residues in agricultural products by developing an official analytical method. A new, reliable analytical method was developed and validated using High Performance liquid Chromatograph-UV/visible detector (HPLC-UVD) for the determination of fluxapyroxad residues. The fluxapyroxad residues in samples were extracted with acetonitrile, partitioned with dichloromethane, and then purified with silica solid phase extraction (SPE) cartridge. Correlation coefficient($R^2$) of fluxapyroxad standard solution was 0.9999. The method was validated using apple, pear, peanut, pepper, hulled rice, potato, and soybean spiked with fluxapyroxad at 0.05 and 0.5 mg/kg. Average recoveries were 80.6~114.0% with relative standard deviation less than 10%, and limit of detection (LOD) and limit of quantification (LOQ) were 0.01 and 0.05 mg/kg, respectively. All validation parameters were followed with Codex guideline (CAC/GL 40). LC-MS (Liquid Chromatograph-Mass Spectrometer) was also applied to confirm the analytical method. Base on these results, this method was found to be appropriate fluxapyroxad residue determination and can be used as the official method of analysis.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.273-281
• /
• 2012

This study was conducted for the establishment of the analytical method of pesticide residues in rice straw for 9 pesticides; etofenprox, tricyclazole, diazinon, edifenphos, propiconazole, carbaryl, carbofuran, 3-hydroxy carbofuran and 3-keto carbofuran and for the monitoring of these pesticides in rice straw for livestock feed in Korea. These pesticides were classified into 4 groups according to analytical instrument condition. Group 1 (HPLC-UVD1) included tricyclazole and etofenprox while group 2 (HPLC-UVD2) included propiconazole and edifenphos. Group 3 (HPLC-FLD) included carbaryl, carbofuran, 3-hydroxy carbofuran and 3-keto carbofuran. Group 4 (GC-NPD) included Diazinon. The dried rice straw samples were extracted with acetone and purified by liquid-liquid partition and solid phase extraction (SPE): Combination of Florisil SPE and amino-propyl SPE was used for group 1 and group 2, amino-propyl SPE for group 3, and Florisil SPE was for group 4. Recovery was in the ranged 70~110% and the limits of quantitation (LOQ) were lower than the half of maximum residue limits. Therefore this method was proved to be efficient for monitoring of these pesticides residue in rice straw. A total of 18 rice straw samples from 6 provinces in Korea in 2010 were analyzed using established method and, only 3-keto carbofuran was detected in one sample at concentration of 0.04 mg/kg.

• The Korean Journal of Pesticide Science
• /
• v.15 no.3
• /
• pp.254-268
• /
• 2011

Fenoxycarb, pyriproxyfen and methoprene are juvenile hormone mimic insecticide. These insecticides have been widely used for mosquito, fly, scale insects, and Lepidoptera. The purpose of this study was to develop a simultaneous determination procedure of fenoxycarb, pyriproxyfen and methoprene residues in crops using HPLC-UVD/MS. These insecticide residues were extracted with acetone from representative samples of four raw products which comprised brown rice, apple, green pepper, and Chinese cabbage. The extract was diluted with saline water, and then n-hexane/dichloromethane partition was followed to recover these insecticides from the aqueous phase. Florisil column chromatography was additionally employed for final clean up of the extract. The analytes were quantitated by HPLC-UVD/MS, using a $C_{18}$ column. The crops were fortified with each insecticide at 3 levels per crop. Mean recovery ratios were ranged from 80.0 to 104.3% in four representative agricultural commodities. The coefficients of variation were less than 4.8%. Quantitative limit of fenoxycarb, pyriproxyfen, and methoprene was 0.04 mg/kg in crop samples. A HPLC-UVD/MS with selected-ion monitoring was also provided to confirm the suspected residues. The proposed simultaneous analysis method was reproducible and sensitive enough to determine the residues of fenoxycarb, pyriproxyfen and methoprene in the agricultural commodities.

• Journal of Food Hygiene and Safety
• /
• v.32 no.4
• /
• pp.298-305
• /
• 2017

Benzovindiflupyr is a new pyrazole carboxamide fungicide that inhibits succinate dehydrogenase of mitochondrial respiratory chain. This study was carried out to develop an analytical method for the determination of benzovindiflupyr residues in agricultural commodities using LC-MS/MS. The benzovindiflupyr residues in samples were extracted by using acetonitrile, partitioned with dichloromethane, and then purified with silica solid phase extraction (SPE) cartridge. Correlation coefficient ($r^2$) of benzovindiflupyr standard solution was 0.99 over the calibration ranges ($0.001{\sim}0.5{\mu}g/mL$). Recovery tests were conducted on 5 representative agricultural commodities (mandarin, green pepper, potato, soybean, and hulled rice) to validate the analytical method. The recoveries ranged from 79.3% to 110.0% and then relative standard deviation (RSD) was less than 9.1%. Also the limit of detection (LOD) and limit of quantification (LOQ) were 0.0005 and 0.005 mg/kg, respectively. The recoveries of interlaboratory validation ranged from 83.4% to 117.3% and the coefficient of variation (CV) was 9.0%. All results were followed with Codex guideline (CAC/GL 40) and Ministry of Food and Safety guideline (MFDS, 2016). The proposed new analytical method proved to be accurate, effective, and sensitive for benzovindiflupyr determination and would be used as an official analytical method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.21-35
• /
• 2022

With the support of local and central governments, various incentive policies for "green" cars have been established, and the number of electric vehicle users has been rapidly increasing in recent years. As a result, much attention is being given to establishing a user-centered charging infrastructure. A standard for the number of electric vehicle chargers to be supplied is being prepared based on building characteristics, but there is quite limited research on the appropriate ratio of slow and fast chargers based on the characteristics of each place. Therefore, this study derived an appropriate penetration ratio based on data about the distribution ratio of common slow chargers. These data were collected using a survey of actual electric vehicle users. Next, an analysis was done on how to categorize the needs of charging environments and to determine what criteria or characteristics to use for categorization. Based on the results of the survey analysis, three types of places were derived. Type-1 places require 10% of chargers to be slow chargers, Type-2 places require 40-60% of chargers to be slow chargers (i.e., around equal distribution of slow and fast chargers), and Type-3 places require more than 80% of chargers to be slow chargers. The required levels of slow chargers were classified by place type and by individual using latent class cluster analysis, which made it possible to categorize them into five clusters related to socioeconomic variables, vehicle characteristics, traffic, and charging behaviors. It was found that there was a high correlation between charging behavior, weekend travel behavior, gender, and income. The results and insights from this study could be used to establish charging infrastructure policies in the future and to prepare standards for supplying charging infrastructure according to changes in the electric vehicle market.

• Journal of Food Hygiene and Safety
• /
• v.28 no.1
• /
• pp.63-68
• /
• 2013

Ethyl carbamate (EC) is a contaminant generated in the fermentation processes of various fermented foods. In this study, residue levels of EC in 95 alcoholic beverage samples were determined by using Gas Chromatography/Tandem Mass Spectrometry (GC/MS/MS). All the samples were purified by a liquid-liquid extraction (LLE) method using dichloromethane. The LLE method enables an improvement in time and cost to detection and specificity over the conventional extraction methods. The limits of detection and quantification (LOD and LOQ) to analyze EC were 1.3 and 4.0 ng/mL, respectively. The recovery rates of EC were ranged from 90.0 to 97.5% at the levels of 50, 100, and 500 ug/L. Among traditional grain-based alcoholic beverage samples (n = 34), the average residue levels of EC in takju, yakju, and cheongju were 0.63, 7.01, and 14.11 ug/L, respectively. Among fruit-based alcoholic beverage samples (n = 48), those of EC in japanese apricot spirits, bokbunjaju, grape wines, and other fruit wines were 79.18, 1.66, 2.64, and 2.39 ug/L, respectively. Among distilled or diluted alcoholic beverage samples (n = 13), those of EC in soju (distilled or diluted), general distillates, liquors, and brandies were 0, 3.30, 8.20, and 8.52 ug/L, respectively. Therefore, this study reports that the residue levels of EC in the alcoholic beverages, distributed in the current domestic markets, did not reach its maximum allowed levels of 30 and 400 ug/L established for grape and fruit wines in Canada, respectively.

• Journal of Korea Water Resources Association
• /
• v.44 no.4
• /
• pp.315-325
• /
• 2011

There are not many practical measures to solve a water conflict, when a hydromorphologically asymmetric situation in international rivers exists whereby downstream users may not affect upstream users but upstream users do cause downstream impacts. In taking advantage of this merit, North Korea has built Imnam Dam in upstream of North Han River and uses water for trans-basin hydropower generation. As an impact of this dam South Korean' area as a downstream user has been suffered from water deficit and dry river. It is very critical for South Korea to solve a key problem such as water allocation for water supply and river maintenance. Therefore, this study is aim to suggest alternatives for equitable water allocation in consideration of special circumstances between the South and the North. For this, reviewing the allocation methods of water rights is carried using lessons obtained from international river cases. The results show that the minimum desired streamflow is calculated at 7.3 $m^3/sec$; water budget analysis by the equitable distribution of streamflows at the border line of the North Han River, the difference in water supply deficiency is at 3.7 $m^3/sec$ before and after Imnam Dam; in the determined distribution method, the difference in water deficiency is at 11.38 $m^3/sec$. These results show that South Korea should be secured 11.38 $m^3/sec$ from North Korean's Imnam Dam in respective of water use right and sound river maintenance.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.3
• /
• pp.1-9
• /
• 2011

The purpose of this study is to propose plans to increase the number of urban parks as a way to help absorb carbon in order to implement the low carbon green city goals of Gangneung. As a study method, park incentive areas and current park areas were set as parameters and the areas of lacking in park space were categorized according to each indicator. The degree of park shortage was classified by overlapping the park shortage areas. Once the areas needing parks were assessed according to priority, target sites were selected on sites where construction would be actually possible. First, results of analysis showed that Songjeong-Dong and Seongdeok-Dong to the east of the target site lacking park space due to old residences and high population density or industrial use areas, were the most severe in the degree of park shortage. It was also shown that areas with high population density and park shortages included the Ponam-Dong, Okcheon-Dong and Hongje-Dong areas. Accordingly, the east side of the target areas and Hongje-Dong were both considered as high-priority areas needing to increase park space and actual possible target sites were selected for the creation of new, small parks in industrial areas by creating parks in school yards, in facility relocation sites and legal reviews. In addition, analysis indicators of park shortages were re-evaluated according to the securing of the park and it was shown that the problems in park shortages were resolved with the proper positioning of parks. In addition, satisfaction in the area of park per person, $3m^2$ was at a higher than a certain level in all areas except Songjeong-Dong, demonstrating that the park areas were evenly distributed. Areas of park shortage were shown in part of Songjeong-Dong and Seongdeok-Dong. This could be resolved by using alternative park resources such as the adjacent Gyeongpo Provincial Park, the beach and Namdaecheon.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.2
• /
• pp.114-123
• /
• 2009

To investigate the possible use of plants for landscaping in reclaimed soil, a planting pilot system experiment was performed over the course of four years in reclaimed dredging area with four species: Alnus firma, Alnus hirsuta, Pinus thunbergii, and Pyrachantha angustifolia for 4 years. The physicochemical characteristics of the tested soil showed that it was sandy through coming from a reclaimed dredging area. The average pH of the tested soil was 7.16(slight alkali), and electric conductivity(EC) was relatively low, $294{\mu}S/cm$, even though it came from a saltwater area. To test the effect of planting density vs. phytomass by plant specie from a planting basin, the experiment was designed using four plant species with high and low planting densities over 4 years. The planting conditions of the growth of landscape tree species exhibited growth height as follows: A. hirsuta, A. firma, P. thunbergii, and P. angustifolia, whill the DBH followed the order of A. hirsuta, A. firma, and P. thunbergii. The total phytomass of each plant was higher at low density planting areas than high density planting area in terms of total phytomass production and growth distribution in the reclaimed dredging area. Total phytomass per unit area increased as follows: A. hirsuta, A. firma, P. thunbergii, and P. angustifolia. The total phytomass per each tested plant was 2 times higher in low density planting areas than high density planting areas. Total phytomass per unit area, however, was similar or slighty higher in high density planting areas compared to low density areas. Among the tested plants, A. hirsuta showed the highest phytomass, implying that A. hirsuta adapted very well to the reclaimed area and has the capability of a fast growth, nitrogen fixation tree, and utilizing insoluble nutrients through inoculated root nodule bacteria. The yield of phytomass per individual in low density Alnus species was greater than that of the high density. However, those per unit areas had no difference in the density-dependent planting. The ratio of belowground to aboveground was $0.21{\sim}0.26$. Thus, it could be concluded that the Alnus species are potential candidates for ornamental tree species in reclaimed dredging areas. This study offers baseline data for the use of ornamental tree species in reclaimed dredging areas. Additional research is required for different ornamental species in order to increase phytomass of a planting conditions based on reclaimed dredging areas.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.4
• /
• pp.223-231
• /
• 2012

The purpose of this study is to investigate basically the mechanism of heat transfer by the resolution of complex fluid flow inside a sophisticated designed screw dryer for the treatment of sewage sludge by using numerical analysis and experimental study. By doing this, the result was quite helpful to obtain the design criteria for enhancing drying efficiency, thereby achieving the optimal design of a multiple screw type dryer for treating inorganic and organic sludge wastes. One notable design feature of the dryer was to bypass a certain of fraction of the hot combustion gases into the bottom of the screw cylinder, by the fluid flow induction, across the delicately designed holes on the screw surface to agitate internally the sticky sludges. This offers many benefits not only in the enhancement of thermal efficiency even for the high viscosity material but also greater flexibility in the application of system design and operation. However, one careful precaution was made in operation in that when distributing the hot flue gas over the lump of sludge for internal agitation not to make any pore blocking and to avoid too much pressure drop caused by inertial resistance across the lump of sludge. The optimal retention time for rotating the screw at 1 rpm in order to treat 200 kg/hr of sewage sludge was determined empirically about 100 minutes. The corresponding optimal heat source was found to be 150,000 kcal/hr. A series of numerical calculation is performed to resolve flow characteristics in order to assist in the system design as function of important system and operational variables. The numerical calculation is successfully evaluated against experimental temperature profile and flow field characteristics. In general, the calculation results are physically reasonable and consistent in parametric study. In further studies, more quantitative data analyses such as pressure drop across the type and loading of drying sludge will be made for the system evaluation in experiment and calculation.