• Title/Summary/Keyword: 분말활성탄소

Search Result 40, Processing Time 0.03 seconds

Electrochemical Performance of Composite Active Materials (Activated Carbon + $LiCoO_2$) Electrode (혼합 활물질 (활성탄소 + $LiCoO_2$) 전극의 전기화학적 특성)

  • Kim, Ick-Jun;Jeon, Min-Jae;Yang, Sun-He;Moon, Seoung-In;Kim, Hyun-Soo
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2007.06a
    • /
    • pp.497-497
    • /
    • 2007
  • 활성탄소를 양쪽 전극에 사용하는 전기이중층 커패시터는 고출력 특성과 반영구적인 cycle 수명인 장점을 가지고 있는 반면, 단위 중랑 또는 부피 당 용량이 작아 메모리 백업용 보조전원으로서의 활용에 그치고 있다. 이를 보완하기 위하여 최근에는 앙쪽의 전극에 충방전 메카니즘을 달리하는 비대칭 전극 설계기술을 기반으로 하는 하이브리드 커패시터가 개발되었고, 에너지밀도로서는 유기계 전해액에서 약 15-20 Wh/kg를 가지는 것으로 보고되고 있다. 본 연구메서는 양극의 활성탄소에 비용량이 상대적으로 큰 LiCo02 분말을 혼합한 하이브리드 전극의 제조 및 전기화학적 특성을 조사하였다. 이때 $LiCoO_2$ 분말의 혼합 종량비의 영향에 의한 전극 부피 당 용량(mAh/cc)의 변화와 $LiCoO_2$ 분말의 입자 크기에 의한 하이브리드 전극의 출력 특성을 조사하였다. $LiCoO_2$ 분말은 불밀을 이용하여 입자크기를 조절하였고, 각각의 입자크기를 가지는 LiCoO2 분말을 활성탄소와 함께 혼합하여 혼합 활물질 : Carbon black : PTFE의 중량비가 90 : 5 : 5가 되도록 sheet 전극을 제조하였다. 제조한 전극을 양극에, Li foil을 음극에, 전해액을 LiPF6 in EC DMC를 사용하여 코인셀을 제조하고 전기화학적 특성은 MACCOR 충방전기를, AC 저항은 AC impedance를 각각 사용하여 평가하였다. 활성탄소에 $LiCoO_2$ 분말의 첨가 중량비가 증가할수록 전극 부피 당 용량은 증가하였으나, 원료 상태의 $LiCoO_2$ 분말의 첨가에서는 코인셀의 전극 저항은 첨가 중량에 따라 단순 증가하였다. 그러나 미세 $LiCoO_2$ 분말을 첨가할 경우, 20%의 첨가에서 전극 저항은 활성탄소 만을 사용한 전극과 동등한 전극저항을 나타내고 충방전 cycle 특성도 개선되는 것을 확인하였다.

  • PDF

아크릴 폐직물을 이용하여 제조한 활성탄소의 기공구조 발현 과정

  • 유소영;윤창훈;박연흠;박종래
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 1998.10a
    • /
    • pp.489-492
    • /
    • 1998
  • 흡착 기능을 가지는 소재로서 오래 전부터 사용되어 온 활성탄소는 최근 환경에 대한 관심이 고조되면서 새삼 주목의 대상이 되고 있는 소재이다. 제품의 형태는 사용 목적에 따라 다르지만 보편화 된 것은 주로 입상 및 분말 상이다. 하지만 이러한 형태는 비표면적이 작고 기공분포가 넓은 단점 때문에 미세 오염물의 제거에는 부적합한 면이 있다[1]. (중략)

  • PDF

Density and Water Absorption Properties of Matrix Mixing with Powdered Active Carbon according to Binder Type (결합재 종류에 따른 분말활성탄소를 혼입한 경화체의 밀도 및 흡수율 특성)

  • Pyeon, Su-Jeong;Kim, Won-Jong;Lee, Sang-Soo
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2017.11a
    • /
    • pp.111-112
    • /
    • 2017
  • Radon has been considered the greatest source of exposure within the total radiation exposure of the human body. xposure from radon, which exists in indoor air quality, lacks public perception, Radon, which exists anywhere on earth, is not regarded as a state of attention even if it is above the average level. Indoor radon exposure situations are not intentionally introduced, and essentially the attention and responsibilities of radon exposures are assumed to be in indoor occupants. So, these are caused by common uranium and thorium scattering on Earth, and are brought into the building by fine cracks or exposed indicators of the buildings. Therefore, this study aims to reduce the risk of radon rays and reduce radon, which induces diseases caused by breathing in the body of indoor air pollutants and emitting diseases by emitting alpha rays from the radon gas.

  • PDF

Raman and Photoluminescence Study of Single-Walled Carbon Nanotubes Dispersed in Sodium Dodecyl Sulfate Aqueous Solution Using Ultrasonication (계면활성제를 이용한 단층 탄소나노튜브 분리에 따른 라만과 Photoluminescence 연구)

  • Park, June;Seong, Maeng-Je
    • Journal of the Korean Vacuum Society
    • /
    • v.17 no.2
    • /
    • pp.170-174
    • /
    • 2008
  • We have studied, using Raman and photoluminescence (PL) spectroscopy, material property changes of single-walled carbon nanotubes (SWCNTs) dispersed in sodium dodecyl sulfate(SDS) aqueous solution by ultrasonication. Radial breathing mode Raman intensities of the dispersed SWCNTs shows different behavior depending on their chiralities as the sonication time increases. As the amount of SWCNTs dispersed in 1wt% SDS solution increases, both a downshift of the G-band Raman frequency and an enhancement in the PL intensity were observed.

Application of Unburned Carbon Produced from Seochun Power Plant (서천화력발전소 매립 석탄재에서 분리한 미연탄소의 재활용 방안)

  • Lee, Sujeong;Cho, Seho;Lee, Young-Seak;An, Eung-Mo;Cho, Sung-Baek
    • Resources Recycling
    • /
    • v.23 no.1
    • /
    • pp.40-47
    • /
    • 2014
  • Feasibility of utilizing unburned carbon residue in coal ash as a potential precursor for the production of activated carbon was assessed to seek for solution to recycle unburned carbon residue. The unburned carbon concentrate generated from the 4 stages of cleaner flotation has a grade of 87% carbon. The crystalline impurities in the concentrate included quartz and mullite. Unburned carbon had a low specific surface area of $10m^2/g$, which might be related to a high degree of coalification of domestic anthracite coal. Carbon particles were mostly porous and have a turbostratic structure. When 1g of carbon was activated with 6g of KOH powder, the highest specific surface area value of $670m^2/g$ was achieved. Low wettability of unburned carbon particles, which was resulted from high temperature combustion in a boiler, might cause poor pore formation when they were activated by KOH solution. The activated carbon produced in this study developed micropores, with an equivalent quality of general-purpose activated carbon made from coal. Hence, it is concluded that chemically treated unburned carbon can be used for water purification or an alternative to carbon black as it is.

Chromaticity Improvement of PEG Waste from Wire Sawing of Silicon Ingot (실리콘 잉곳 절삭시 발생하는 폐 PEG 색도 개선에 관한 연구)

  • Cho, Yun-Kyeong;Jung, Kyeong-Youl;Sim, Min-Seok;Lee, Gi-Ho
    • Korean Chemical Engineering Research
    • /
    • v.50 no.2
    • /
    • pp.310-316
    • /
    • 2012
  • The chromaticity of polyethylene glycol (PEG) generated from the recyling of a silicone slurry waste was improved by using activated carbon powder and a carbon filter. The color change of the PEG waste was investigated by changing the amount of adsorbent, adsorption time and temperature. The surface area of activated carbon did not have a significant impact on improving the color of the PEG waste. According to the results for the APHA color variation of the PEG waste changing the amount of the carbon adsorbent, the optimal usage to achieve the low APHA value was 100~150 mg-C/g-PEG. From the investigatnion on the effect of the adsorption temperature range from $25^{\circ}C$ to $100^{\circ}C$, it was found that the optimal temperatures were $40{\sim}50^{\circ}C$ in terms of achieving the lowest APHA value. The variation of the APHA color was investigated by changing the operation condition of the activated carbon filters. The use of ACF was a good way to enhance the chromaticity of the PEG waste. As a result, the APHA value of the PEG waste (APHA=53 at the initial waste) was reduced to be 10 through the ACF purification. It was also confirmed that the performance of the used carbon adsorbent can be recovered by the washing with purified water.

A Study on Moisture Adsorption Capacity by Charcoals (숯의 수분 흡착성능 연구)

  • Kim, Dae Wan;An, Ki Sun;Kwak, Lee Ku;Kim, Hong Gun;Ryu, Seung Kon;Lee, Young Seak
    • Korean Chemical Engineering Research
    • /
    • v.60 no.3
    • /
    • pp.377-385
    • /
    • 2022
  • Surface morphology and adsorption characteristics of charcoals prepared from Korean traditional kiln were analyzed, and their moisture adsorption capacities were examined with respect to humidity and temperature change. Moisture adsorption capacities of red-clay powder, activated carbon fiber fabric (ACF fabric) and activated carbon fiber paper(ACF paper) were also examined to compare with those of charcoals. Moisture adsorption capacity of charcoal was low less than 45% humidity due to its hydrophobic property, but it slowly and linearly increased as increasing the humidity. Moisture adsorption capacity of red-clay powder was similar to charcoal at low level humidity, it increased exponentially as increasing the humidity showing Type V adsorption isotherm. Therefore, the weather forecast annal prepared by employee of weather centre in Joseon Dynasty is experimentally approved. ACF fabric and ACF paper show excellent moisture adsorption capacities, which can be used to humidity measuring sensor. Adsorption isotherm of charcoal slice was peculear showing the mixed Type I and Type IV due to low-pressure hysteresis that was occurred from embedment of nitrogen in crevice of charcoal. The specific surface area of charcoal increased by grinding charcoal slice to powder, resulted in increasing the desorption amount of adsorbent at low relative pressure.

Protective Effects of Mesangi (Capsosiphon fulvecens) on Hepatotoxicity in Carbon Tetrachloride (CCI4)-Intoxicated Rats (매생이가 사염화탄소로 유발된 흰쥐의 간손상에 미치는 영향)

  • Kwon, Mi-Jin;Nam, Taek-Jeong
    • Journal of Life Science
    • /
    • v.16 no.5
    • /
    • pp.734-739
    • /
    • 2006
  • This study investigated the hepatoprotective effects of mesangi (Capsosiphon fulvecens) in carbon tetrachloride $(CCI_4)$-induced liver injury. Thirty healthy male Sprague-Dawley rats were divided into three groups : the normal (Normal), $CCI_4$-treated $(CCI_4)$, and mesangi-treated (Exp-CF) groups. Administration of $CCI_4$ increased the levels of GOT, GPT, and LDH in serum, while the levels were significantly decreased by the addition of mesangi. Higher levels of HDL-cholesterol were found in the Normal and Exp-CF groups, which has lower levels of total and LDL-cholesterol. Administration of $CCI_4$ also increased IGFBP-1 expression in serum, but it was decreased in the Exp-CF group. This suggests that $CCI_4$ is involved in the change in IGFBP-1 expression via its hepatotoxicity. The results indicate that mesangi has a hepatoprotective effect in rats given $CCI_4$.