• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.10a
• /
• pp.56-57
• /
• 1993

고분자 막을 통한 투과증발에서의 전달기구는 액체 혼합액의 막으로의 용해, 막을 통한 확산, 막 하부에서의 증발을 거쳐 분리가 일어난다고 알려져 있다. 이때 투과증발의 선택도는 수착선택도와 확산선택도의 곱으로 표현 될 수 있다(1). 물의 선택적 분리의 관점에서 친수성 고분자 막을 이용하는 경우, 선택도는 대부분 수착선택도에 기인하며, 우수한 투과속도와 함께 집중적인 연구의 대상이 되었으나 가소화 현상이 심하게 일어나는 단점이 있다. 한편 소수성 고분자 막을 이용하는 경우의 투과 증발 선택도는 대부분 확산선택도에 기인하며, 가소화 현상은 억제되나 투과속도가 낮은 단점이 있다. 그러나 소수성 고분자 막을 이용하는 경우에도 물에 대해 높은 선택도를 달성 할 수 있는데, 예를 들어 polystyrene(PS)으로 만들어진 고분자 막 및 fluoroalkylacrylatemethylstyrene copolymer로 만들어진 고분자 막은 물-에탄올 공급액으로 부터 물에 대한 높은 선택성을 보여주고 있다(2,3). 그러므로 막분리층의 두께를 가능한 한 얇게 하면 분리에 유효한 막이 될 수 있다.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.05a
• /
• pp.162-167
• /
• 2005

초산, 질산, 인산이 함유된 폐혼산으로부터 인산을 분리하여 재활용하기 위한 방법으로 용매추출법을 이용하였다. 폐혼산에서 초산과 질산을 선택적으로 분리하고, 추출 잔류액에서 인산을 회수하고자 하였다. 주요 실험 변수로는 추출제농도, 교반시간, 교반속도 등의 변화에 따른 초산, 질산, 인산의 추출거동을 조사하였다. 또한, McCabe-Thiele diagram으로부터 초산, 질산 성분의 추출 및 탈거에 필요한 이론적 단수를 조사하였다. 실험결과 인산염계 추출제를 사용할 경우 초산과 실산을 선택적으로 분리 추출이 가능하였으며, 추출제의 함량은 유기상의 50%가 적합하였다. 교반속도와 교반시간의 영향은 크게 없었으며, 상비(A/O)=1/3, 6단에서 초산과 질산을 완전히 추출 분리하여 인산을 추출잔류액에서 회수가 가능하였다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.2
• /
• pp.93-99
• /
• 1986

A longline is made of many snoods with baited hooks which are connected to mainline at constant intervals. Hauling the mainline, removing the unused baits and the hooked fish, and the arrangement of hooks are dependent on mainly manual labour as compared with mechanized other fishing gear in fishing operation. The mechanization for longline operation is needed in order to eliminate the manual handling and to shorten the labour time. The magnetic hook splitting apparatus which consists of the hook separator and the guide leading to storage magazine rail was devised for the mechanization of hauling operation. The experiments were carried out in order to measure the splitting rate of hooks in accordance with the hauling speed of mainline and magnetic flux density of splitting apparatus from February to November, 1985. The splitting rate was $94\%$ for the Alaska pollack (Theragra chalcogramma) hook and $96\%$ for the halibut (Paralichthys olivaceus) hook at the hauling speed 24 m/min and magnetic flux density 482 gauss. The unsplitting of hooks was caused by entangling snood in the mainline and low magnetic flux density. The rate is greater the faster hauling speed and the lower magnetic flux density, with an average of about $6\%$, The magnetic flux density needed to hook splitting becomes increased with the increasing hauling speed. When the practical hauling speed is from 20 to 35m/min, the magnetic flux density is needed from 400 to 850 gauss.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.04b
• /
• pp.25-26
• /
• 1997

막을 이용한 기체 분리법의 기초적인 연구는 1880년대에 이미 시작되었지만 실용화가 이루어지지 않은 이유는 막 투과속도가 적었기 때문이었다. 그러나 막 제조기술의 발달에 의해서 처리면적이 매우 큰 초박막이 제조되었고 이로인해 에너지 절약형 기체분리 방법으로서의 막분리법이 다시 흥미를 끌게 되었다. 현재 실용화되고 있는 막으로 투과계수가 큰 실리콘막을 들수 있지만 분리계수가 작기 때문에 보다 분리성능이 큰 새로운 막의 개발이 요망된다. 그러나 실리콘막에 대한 상세한 연구가 별로 없기 때문에 실리콘막을 기준막으로 성능이 좋은 막을 개발하는데 있어서의 데이터가 부족하다. 본 연구는 이와같은 데이터를 보충하고 막투과가 기체의 어떤 성질에 지배되고 있는가를 조사할 목적으로 수행하였다.

• Membrane Journal
• /
• v.27 no.4
• /
• pp.350-357
• /
• 2017

In this study, we used TIPS (thermally induced phase separation) for the application of water treatment membrane, and observed the change in morphology of separation membrane due to the change of solidification temperature and heat capacity. For manufactured membrane, PVDF and silica with excellent mechanical properties and chemical resistance were used, and DOP (dioctyl phthalate), DBP (dibutyl phthalate) were used as the diluent. Using the SEM (scanning electron microscope), the morphology of each different coagulation solutions of heat capacity change was observed. As the heat capacity increased, the crystallization rate of PVDF was decreased and showed large pore. In contrast, It also confirmed that the smaller heat capacity, the faster the crystallization rate and make smaller pores.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.63-70
• /
• 2019

The number of vehicle-to-barrier collisions has increased due to improved driving environments. In addition, it is reported that the number of accidents led to impact severity larger than current capacity of a median barrier has increased. It is required to develop a high performance median barrier in order to secure expressway safety. This paper aims at proposing impact loading model and locations for a high performance median barrier based on analysis of median-barrier-related accident history. The SB6 test level (Impact severity: 420 kJ, Mass: 25 ton, Impact speed: 80 km/h, Impact angle: $15^{\circ}$) was suggested for target impact severity based on statistical data analysis. The suitable locations also were proposed from investigation of driver behaviors for installation and rehabilitation of high performance median barrier.

• The Korean Journal of Mycology
• /
• v.24 no.3 s.78
• /
• pp.186-205
• /
• 1996

This study was carried out to obtain data concerning the genetic variability of Pleurotus ostreatus. Monospores of P. ostreatus were isolated and cultured to estimate differences in the rate of mycelial growth and genetic similarity among the isolates. Although the overall growth rates were slow compared to their parental dikaryon except 2-MI 4, significant differences in the rate of mycelial growth were observed among isolates. Random amplified polymorphic DNA (RAPD) analysis using twenty six random primers showed 345 polymorphic DNA bands from 35 monospore isolates and their parental dikaryon. DNA bands ranged from 0.1 to 4.0 Kb in size. Most various polymorphic DNA bands within monospore isolates were obtained when we used J (OPA-01) or W (OPB-04). The 36-MI 103 showed totally different band patterns from those of the others. RAPD analysis revealed that there is approximatly 75% genetic similarity between monospore isolates and their parental dikaryon except 36-MI 103, which showed only 49% genetic similarity. In addition, genetic similarity degrees were classified into four groups: I (parental dikaryon), II (fast growing type), III (moderate growing type), and IV (slow growing type). However, there is no correlation between mating type and mycelial growth rates.

• Korean Journal of Food Science and Technology
• /
• v.19 no.3
• /
• pp.225-230
• /
• 1987

The foam separation of bovine serum proteins was investigated and the protein fractionation by foam separation was analyzed by PAG electrophoresis. The protein concentration for the surface excess formation of bovine serum was in the range of $20-800\;{\mu}g/ml$. At pH 5, the foamate volume was maximum, but the enrichment ratio minimum. As the temperature was elevated, the foamate volume decreased and the enrichment ratio increase. As the gas flow rate increased from 25 to 100 ml/min, the foamate volume decreased and the enrichment ratio increased. The enrichment ration became maximum when the added ionic strength of serum solution was in the range of 1-3 by the addition of different types of salts, and this was related to the reduction of surface tension of the solution. In general, BSA, ${\alpha}_1$, and ${\alpha}_2-globulins$, which have relatively small molecular weight and high hydrophobicity, moved easily to the foam, and the separation of protein fractions in the serum varied with the changes in pH, temperature, gas flow rate and ionic strength of the solution.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.4
• /
• pp.321-326
• /
• 2010

The non-explosive release device using jack mechanism is designed and fabricated for the small satellite. As a triggering actuator for the release device, a piezo rotory motor with torque of more than $1.7kgf{\cdot}cm$ is employed to guarantee stable activation. For performance tests of separation device, we conducted release time test, preload test and shock test. The device was operated within 1.172sec and activated stably under load of 45kgf. Maximum shock was measured as 18G that is much less than the pyro-separation device produces. We confirmed the possibility as a satellite separation device through above presented tests.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.46-55
• /
• 1994

오늘날 막분리공정의 응용은 다른 분리공정에 비해 경제성과 편리성으로 비교우위에 있어 점차로 사용규모면에 있어서 증대되고 있다. 예를 들면, 바닷물을 음용수로 전환하거나 식품이나 의약공업에서 고분자화합물을 정제, 농축, 분리할 뿐만아니라 신장에서 불순물을 제거에 이르기까지 확대발전되어오고 있으며 화공약품의 분리회수, 초순수화나 환경산업의 폐수처리, 가스의 분리와 회수등의 응용에 이르기까지 쓰임새가 다양하며, 앞으로의 응용범위는 새로운 기능의 분리막개발과 함께 점점 확대되고 있다. 이와같은 막분리공정상 물질전달의 기본적특성인 추진력과 물리적인 성질의 중요성을 이해하는 것은 막분리공정을 설계제작하는데 필요하다. 막내에서 물질전달은 분리코져하는 물질의 확산, 전기장에의한 대류속도, 농도, 압력, 흡착 그리고 온도구배 등 물질이동현상을 조절하는 인자들 뿐만아니라 막의 물리적, 화학적 특성과 분리대상물질의 물리화학적 특성등에 의해 결정된다. 이러한 막내에서의 추진력들은 서로 상호 보완적이고 경우에 따라서는 새로운 효과를 나타낼 수 있다. 본 논문에서는 추진력에 따른 막물질이동에 영향을 주는 요소들을 저자가 경험한 결과들을 토대로 총론형식으로 열거하였다.