• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.3
• /
• pp.54-68
• /
• 2011

As the prediction accuracy of conditional branch instruction is increased highly, the importance of prediction accuracy for unconditional branch instruction is also increased accordingly. Except the case of RAS(Return Address Stack) overflow, the prediction accuracy of function return address should be 100% theoretically. However, there exist some possibilities of miss-predictions for RAS return addresses, when miss-speculative execution paths are invalidated, in case of modern speculative microprocessor environments. In this paper, we propose the RAS rename technique to prevent RAS pollution, results in the reduction of RAS miss-prediction. We divide a RAS stack into a soft-stack and a hard-stack and we handle the instructions for speculative execution in the soft-stack. When some overwrites happen in the soft-stack, we move the soft-stack data into the hard-stack. In addition, we propose an enhanced version of RAS rename scheme. In simulation results, our solution provide 1/90 reduction of miss-prediction of function return address, results in up to 6.85% IPC improvement, compared to normal RAS method. Furthermore, it reduce miss-prediction ratio as 1/9, compared to previous technique.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.5
• /
• pp.675-687
• /
• 2019

In recent years, the needs for double deck-tunnels have increased in large cities due to the increase in traffic volume and high land compensation costs. In Korea, a network type tunnel which is smaller than general road tunnels and crosses another tunnel underground is planned. In the shield tunnel joints between the existing shield tunnel and the box-type enlargement section, a partial steel-concrete joint is proposed where the bending moment is large instead of the existing full-section steel joint. In order to analysis the enlargement section of the shield tunnel diverged section to reflect the three-dimensional effect, the two-dimensional analysis model is considered to consider the column effect and the stiffness effect of the longitudinal member. A two-dimensional analysis method is proposed to reflect the stiffness of the longitudinal member and the column effect of the longitudinal point by considering the rigidity of the longitudinal member as the elastic spring point of the connecting part in the lateral model. As a result of the analysis of the model using the longitudinal member, it was considered that the structural safety of the partial steel-concrete joint can be secured by reducing the bending moment of the joint and the box member by introducing the longitudinal member having the stiffness equal to or greater than a certain value.

• ETRI Journal
• /
• v.10 no.3
• /
• pp.9-23
• /
• 1988

반도체 기술의 급격한 발전으로 마이크로프로세서를 이용하여 수퍼미니급의 컴퓨터를 개발하는 것이 가능하게 되었다. 따라서 프로세서 칩 개발노력이 증대되었으며 컴퓨터 구조 또는 프로세서 구조에 관한 연구도 여러 곳에서 진행되고 있다. 우리나라의 경우 독자적인 명령어를 갖는 컴퓨터를 개발하겠다는 노력은 미미하였으며 외부로 발표된 것은 전무한 상태이다. 본 논문은 한국전자통신연구소에서 개발하고 있는 독자적인 명령어 세트를 가지는 RISC 형태의 32 비트 마이크로프로세서인 HARP의 구조설계에 관한 것으로서 기본구조 설계를 위하여 1980년대 이후에 개발된 RISC 프로세서들에 대한 사례연구를 하였으며, 이를 바탕으로 HARP의 명령어 및 데이터 형식, 레지스터의 구성, 48비트의 가상 어드레스 사용방법, load/store 및 분기 명령어에서 사용되는 어드레싱 모드 그리고 HARP에서 정의한 39개의 명령어들에 대해 기술한다.

• The Journal of the Korea Contents Association
• /
• v.13 no.3
• /
• pp.9-21
• /
• 2013

Due to increased computing power and flexibility of GPU, recent GPUs execute general purpose parallel applications as well as graphics applications. Programmers can use GPGPU by using the APIs from GPU vendors. Unfortunately, computational resources of GPU are not fully utilized when executing general purpose applications because of frequent branch instructions. To handle the branch problem, several warp formations have been proposed. Intuitively, we expect that the warp formations providing higher computational resource utilization show higher performance. Contrary to our expectations, according to simulation results, the performance of the warp formation providing better utilization is lower than that of the warp formation providing worse utilization. This is because warp formation providing high utilization causes serious memory bottleneck due to increased memory request. Therefore, warp formation providing high computation utilization cannot guarantee high performance without proper hardware resources. For this reason, we will analyze the correlation between hardware configuration and warp formation. Our simulation results present the guideline to solve the underutilization problem due to branch instructions when designing recent GPU.

• Journal of Korea Water Resources Association
• /
• v.54 no.5
• /
• pp.289-299
• /
• 2021

This study analyzes bifurcation characteristics of the Seolmacheon experimental catchment by extracting the shape variation of channel network due to variable scale of source basin or threshold area. As the area of source basin decreases, a bifurcation process of channel network occurs within the basin of interest, resulting in the elongation of channel network (increase of total channel length) as well as the expansion of channel network (increase of the source number). In the former case, the elongation of channel reaches overwhelms the generation of sources, whereas, in the latter case, the drainage path network tends to fulfill the inner space of the basin of interest reflecting the opposite trend. Therefore, scale invariance of natural channel network could be expressed to be a balanced geomorphologic feature between the elongation of channel network and the expansion of channel network due to decrease of source basin scale. The bifurcation structure of the Seolmacheon experimental catchment can be characterized by the coexistence of the elongation and scale invariance of channel network, and thus a further study is required to find out which factor is more crucial to rainfall transformation into runoff.

• KDI Journal of Economic Policy
• /
• v.15 no.1
• /
• pp.3-86
• /
• 1993

본(本) 거시경제모형(巨視經濟模型)은 "케인즈"적인 소득지출모형(所得支出模型)으로서, 최근 개방화 및 자율화추세에 따라 크게 변모한 경제구조하에서 예측의 정확도를 높이고 대내외여건(對內外與件) 변화(變化)에 기인한 제반 영향을 보다 명확하게 분석하기 위해서 작성되었다. 모형(模型)의 구조(構造)는 6개 부문, 162개의 방정식으로 구성되어 있으며, 70년대와 80년대의 구조변화(構造變化)를 고려하여 1982년부터 1991년까지를 추정대상 기간으로 삼았다. 기존의 KDI 분기모형과 비교할 때 본(本) 개정모형(改定模型)의 가장 두드러진 특징은 총량변수를 항목별로 세분하여 대내외여건 변화시 경제에 마치는 영향을 기존의 총량수준보다 한 단계 더 세분화된 수준에서 파악하고자 한 점이다. 또한 각종 가격변수들의 시장조절기능(市場調節機能)을 반영하기 위해서 금리(金利), 임금(賃金), 환율(換率) 등을 내생화(內生化)하였고, 총통화(總通貨)와 장기자본수지(長期資本收支) 등도 모형내에서 결정되도록 하였다. 역사적(歷史的) 시뮬레이션의 결과, 주요 내생변수의 평균자승근퍼센트오차가 5% 내외의 양호한 수준을 나타냄으로써 본(本) 모형(模型)이 80년대의 구조변화(構造變化)를 적절히 반영하고 있다고 볼 수 있다. 정책(政策)시뮬레이션은 원유 및 원자재수입가격과 같은 해외여건(海外與件) 변화(變化)와, 기타건설(其他建設), 정부소비지출(政府消費支出), 국내민간신용(國內民間信用)의 확대와 같은 정책변화(政策變化)의 두 부문으로 나누어 시행하였다. 원유 및 원자재가격의 상승은 우리 경제에 부(負)의 공급충격(供給衝擊)으로 작용함으로써 성장을 둔화시키고 물가를 상승시켰으며, SOC 투자를 포함한 기타건설(其他建設)의 증가(增加), 정부소비지출(政府消費支出),의 확대(擴大), 민간신용(民間信用)의 증가(增加)는 모두 단기적으로 경기부양의 효과는 있으나 장기적으로 물가를 더욱 상승시키는 것으로 나타나 물가(物價)와 성장(成長)이 서로 상충관계에 있는 것으로 파악되었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1048-1057
• /
• 2012

In this paper, a new compact dual-band unequal power divider is suggested. Instead of the quarter wavelength transmission line(TX-line)s for the branches of the conventional Wilkinson's power divider, we use composite right- and left-handed(CRLH) phase-shift lines and can reduce the physical length. With the non-linear dispersion of the meta-meterial, each branch in the proposed divider is designed to have $+90^{\circ}$ and $-90^{\circ}$ at $f_1$ and $f_2$ respectively. To validate the proposed method, the performances of the circuit and full-wave simulation results are shown with the CRLH dispersion curve. The measurement results are compared with the simulation results. Also, the size reduction effect by the proposed scheme is addressed.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.2
• /
• pp.87-94
• /
• 2014

This study aims to analyze the relationship. The study applies EDF (Expected Default Frequency) as a variable that indicates management status of a construction company. To analyze changes in business structure of construction companies, the study refers to the amounts of domestic and overseas project orders as variables. The data was retrieved from TS2000 established by Korea Listed Companies Association (KLCA), Statistics Korea and International Contractors Association of Korea. The analysis period is between first quarter of 2001 and fourth quarter of 2010. The analysis results showed that as more domestic and overseas orders rolled in for domestic companies, their business conditions improved as the hypothesis suggested. However, the level of improvement varied. Further, when construction companies' business slowed down, the proportion of overseas projects tended to rise, while the ratio of domestic business decreased.

• 한국상하수도협회지
• /
• s.4
• /
• pp.66-69
• /
• 2003

"급수장치"라 함은 수도사업자가 일반의 수요자에게 정수를 공급하기 위하여 설치한 배수관으로부터 분기하여 설치된 급수관, 계량기, 저수조, 수도전, 기타 급수에 관련된 기구를 말한다. 우리나라에서는 수도시설의 급수장치의 구조 및 재질에 대해 따로 정한 사항이 없고 수도법 시행령 제18조의2에서 정한바와 같이 일반적인 수도용 자재기준에 따르도록 규정하고 있다. 한편 일본의 경우를 살펴보면 급수장치가 갖추어야 될 구조 및 재질에 관한 사항을 수도법 시행령으로 규정하고 있고 수격한계, 유해물질의 침출성능 및 역류방지 등에 관한 품질특성치를 후생성령으로 정해 수도사업자의 급수의무에 대응하여 공급계약시 수용가의 준수사항을 상세히 규정하고 있다. 우리나라에서도 급수장치가 일반적인 수도용 자재와 구분되어 관리될 필요가 있다고 판단하고 우선 일본의 급수장치의 구조 및 재질에 관한 후생성령을 번안하여 수록하였다.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.4
• /
• pp.133-140
• /
• 2010

This paper studies on the instability behaviour of the Seoul southwest baseball dome. The nonlinear Snapping phenomenon of the structure is investigated about the load mode by the design load of analysis structure and these combined loads. The initial imperfection obtains the buckling mode through the eigenvalue analysis of the tangential stiffness matrix and uses this for the nonlinear analysis. However, the buckling of members or the local buckling, and etc don't consider in the research range of this research task. Also it is limited the overall buckling phenomenon.