• Geophysics and Geophysical Exploration
• /
• v.24 no.4
• /
• pp.149-157
• /
• 2021

Given that induced polarization (IP) and direct current (DC) resistivity surveys are similar in terms of data acquisition, most DC resistivity systems are equipped with a time-domain IP data acquisition function. In addition, the time-domain IP data include the DC resistivity values. As such, IP and DC resistivity data are intimately linked, and the inversion of IP data is a two-step process based on DC resistivity inversions. Nevertheless, IP surveys are rarely applied, in contrast to DC resistivity surveys, as proper inversion software is unavailable. In this study, through numerical modeling and inversion experiments, we analyze the problems with the conventional inverse mapping technique used to invert time-domain IP data. Furthermore, we propose a modified inverse mapping technique that can effectively suppress inversion artifacts. The performance of the technique is confirmed through inversions applied to synthetic IP data.

• Economic and Environmental Geology
• /
• v.21 no.2
• /
• pp.165-169
• /
• 1988

Negative induced polarization (IP) responses are examined for two-dimensional structures using a modeling technique with finite difference method. Percent frequency effect is used for IP parameter because it can be efficiently computed by a perturbation method. Thin conductive, polarizable overburden causes obvious negative IP responses on IP pseudosection. This fact means that IP responses from resistive, polarizable body below the overburden can be masked solely as a function of the resistivity distribution. Resistive, non-polarizable body below the overburden, however, can be detected by the negative IP responses.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.179-184
• /
• 2008

Silt or clay alluvium fully saturated with water generally shows low resistivity. Sometimes it is believe that the low resistivity layer is considered as good aquifer but this makes problems in the development of groundwater. To overcome this problem, we adopted induced-polarization(IP) method with resistivity method. Laboratory experiments and resistivity/IP field surveys with non-polarization electrodes were conducted for the study. Laboratory experiments shows that the increase of clay contents in the sample mixed with sand and clay give low resistivity and high chargeability. We used this experiment results in the interpretation of resistivity/IP field data which were obtained in riverbank filtration. Finally, the layer which has low resistivity and chargeabilty would be regarded as a good aquifer for the development of groundwater intake.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.211-217
• /
• 2003

Recently, with rapid development in marine and shipbuilding industries such as marine structures, ships and chemical plants for ship, there occurs much interest in the study on corrosion characteristics played an important role in mechanical design. This paper was studies on the corrosion characteristics of chromium plating in the marine environment. Under the various specific resistance, the electrochemical polarization test of chromium plating was carried out. And thus corrosion potential, polarization resistance, corrosion current density, control efficiency of corrosion and polarization control behavior of chromium plating are investigated. The main results are as the followed : 1. The polarization resistance of Cr plating and Ni become higher than that of base metal, also and these material become low with decrease of the specific resistance. 2. As the specific resistance decreases, the corrosion current density of Cr and Ni plating is lower than that of base metal. 3. The corrosion reaction of Cr plating, Ni plating and base metal vs. specific resistance is cathodic control.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.3
• /
• pp.51-55
• /
• 2023

Measurement of the ferroelectric polarization hysteresis curve is an important means of overall evaluation and interpretation of the ferroelectric structure and dielectric properties. If a resistive component is included in the ferroelectric sample, an error is included in the measured value of the spontaneous polarization. When configuring the electrical circuit to measure the polarization, by properly utilizing the external resistance corresponding to the resistive component included in the sample, the error due to the resistive loss of the sample was excluded and the size of the ferroelectric polarization induced inside could be accurately measured. It is expected that the displacement and dielectric characteristics of ions inside the ferroelectric can be more accurately evaluated through the evaluation of such an accurate polarization hysteresis curve.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.117-122
• /
• 1996

본 연구에서는 2개사에서 제조된 합금 600 및 합금 690 이음매 없는 관과 진공 유도 용해로 제조한 합금 690 판재에 대하여 부시 환경의 변화에 따른 특성 평가를 행하였다. 부식 평가는 양극 분극 시험을 통하여 행하였으며 부식 환경은 NaCl, HCl, NaOH(＋$Na_2$SO$_4$) 용액 및 Cu$^{＋}$/Cl$^{－}$ SO$_4$$^{2－}$ 용액이었다. 합금 600 및 합금 690의 양극 분극 저항성을 부식 환경에 따라 평가한 결과, 부식 용액의 종류에 따라 서로 다른 분극 거동을 보이고 있으며, 합금 690의 저항성이 합금 600의 저항성보다 우수하게 나타났다. 또한 가성 용액 중에 $Na_2$SO$_4$를 첨가할 경우 부식 속도를 가속화시키고 있다. 한편 Mo이 첨가되지 않은 합금 690M0의 경우는 Cl$^{－}$ SO$_4$$^{2－}$ 비가 증가할수록 공식 저항성이 급격히 감소하고 있으나, Mo이 첨가된 합금 690M2의 경우는 시험한 전체 비율에서 이온의 영향을 받지 않는 것으로 나타나고 있어 합금 690의 공식 저항성에 Mo이 매우 좋은 효과를 보이고 있음을 알 수 있다.

• Economic and Environmental Geology
• /
• v.20 no.3
• /
• pp.197-201
• /
• 1987

Negative induced polarization (IP) responses are examined for a three-layered earth using a digital linear filter method. The negative IP response can occur when the geoelectric section is of type K or Q. The section of type K creates a more pronounced negative effect than that of type Q. For such sections, IP coefficients are determined as a function of the resistivity distribution and the electrode configuration, and only the IP coefficient of the first layer can be negative. As a result, the negative IP response can occur when the first layer is polarizable in the section of type K or Q. and the polarizabilities of the other layers can act to depress the negative response.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.133-133
• /
• 2003

최근에 강유전체 매체와 원자력 현미경 (Atomic Force Microscopy, AFM)을 이용한 초고밀도 정보 저장 장치에 대한 연구가 활발히 진행되고 있다. 이와 아울러 나도 크기의 도메인에 대하 연구에 있어서 PZT 박막의 분극 방향에 따른 SrRuO$_3$의 저항 변화를 AFM 탐침을 이용하여 감지하는 방법을 제안하였다. 본 연구에서는 Metal tip/semiconductor/barrier oxide/ferroelectric 구조에서 강유전체 분극에 의한 저항 변화의 가능성을 실험하고자, 이와 등가 구조인 Pt tip/n-Si/SiO$_2$ 구조에서 Pt 탐침과 반도체 층 사이의 I-V 특성을 측정함으로써, 게이트 전압에 따른 반도체 층의 저항변화에 대해서 분석해 보았다. 그 결과 게이트 전압에 따라서 과밀 지역 (accumulation layer)과 공핍 지역 (depletion layer)이 형성됨에 따라서 반도체 층의 정항이 변하여 I-V 특성이 변하게 됨을 관찰하였으며, 이 결과로부터 분극 방향에 따라서도 반도체 층의 저항이 변할 수 있음을 알 수 있었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.66-74
• /
• 2013

In this study, corrosion potential ($E_{corr}$), corrosion rate, and polarization resistance were measured aimed at inorganic inhibitors (passive film type) and organic inhibitors (absorption type). The experiment was conducted using potentiostat for the variable molar ratio and chloride ion concentration of the components of inhibitors in an aqueous solution of saturated calcium hydroxide targeting corrosion. As a result, it was possible to ensure an anticorrosive performance of at least a 1.2 molar ratio of inorganic inhibitors. Also, the organic inhibitors ensured the prevention of the anticorrosive performance of at least about a 0.3 molar ratio. It also showed the tendency that between polarization resistance and corrosion rate, Ecorr and corrosion rate is inversely proportional to the linear. Conversely, the tendency between polarization resistance and Ecorr is proportional to the linear. Also, a distinct difference in organic and inorganic inhibitors' relationship to Ecorr, corrosion rate, and polarization resistance was not shown.

• Geophysics and Geophysical Exploration
• /
• v.24 no.4
• /
• pp.171-179
• /
• 2021

We outline a process for estimating Cole-Cole parameters from time-domain induced polarization (IP) data. The IP transients are all inverted to 2D Cole-Cole earth models that include resistivity, chargeability, relaxation time, and the frequency exponent. Our inversion algorithm consists of two stages. We first convert the measured voltage decay curves into time series of current-on time apparent resistivity to circumvent the negative chargeability problem. As a first step, a 4D inversion recovers the resistivity model at each time channel that increases monotonically with time. The desired intrinsic Cole-Cole parameters are then recovered by inverting the resistivity time series of each inversion block. In the second step, the Cole-Cole parameters can be estimated readily by setting the initial model close to the true value through a grid search method. Finally, through inversion procedures applied to synthetic data sets, we demonstrate that our algorithm can image the Cole-Cole earth models effectively.