• Geophysics and Geophysical Exploration
• /
• v.24 no.4
• /
• pp.149-157
• /
• 2021

Given that induced polarization (IP) and direct current (DC) resistivity surveys are similar in terms of data acquisition, most DC resistivity systems are equipped with a time-domain IP data acquisition function. In addition, the time-domain IP data include the DC resistivity values. As such, IP and DC resistivity data are intimately linked, and the inversion of IP data is a two-step process based on DC resistivity inversions. Nevertheless, IP surveys are rarely applied, in contrast to DC resistivity surveys, as proper inversion software is unavailable. In this study, through numerical modeling and inversion experiments, we analyze the problems with the conventional inverse mapping technique used to invert time-domain IP data. Furthermore, we propose a modified inverse mapping technique that can effectively suppress inversion artifacts. The performance of the technique is confirmed through inversions applied to synthetic IP data.

• Economic and Environmental Geology
• /
• v.21 no.2
• /
• pp.165-169
• /
• 1988

Negative induced polarization (IP) responses are examined for two-dimensional structures using a modeling technique with finite difference method. Percent frequency effect is used for IP parameter because it can be efficiently computed by a perturbation method. Thin conductive, polarizable overburden causes obvious negative IP responses on IP pseudosection. This fact means that IP responses from resistive, polarizable body below the overburden can be masked solely as a function of the resistivity distribution. Resistive, non-polarizable body below the overburden, however, can be detected by the negative IP responses.

• Geophysics and Geophysical Exploration
• /
• v.24 no.4
• /
• pp.171-179
• /
• 2021

We outline a process for estimating Cole-Cole parameters from time-domain induced polarization (IP) data. The IP transients are all inverted to 2D Cole-Cole earth models that include resistivity, chargeability, relaxation time, and the frequency exponent. Our inversion algorithm consists of two stages. We first convert the measured voltage decay curves into time series of current-on time apparent resistivity to circumvent the negative chargeability problem. As a first step, a 4D inversion recovers the resistivity model at each time channel that increases monotonically with time. The desired intrinsic Cole-Cole parameters are then recovered by inverting the resistivity time series of each inversion block. In the second step, the Cole-Cole parameters can be estimated readily by setting the initial model close to the true value through a grid search method. Finally, through inversion procedures applied to synthetic data sets, we demonstrate that our algorithm can image the Cole-Cole earth models effectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.211-214
• /
• 1999

염화물 및 방청제가 함유된 철근 콘크리트의 부식특성을 마크로 셀 부식측정 방법인 갈바닉 전류 측정과 마이크로 셀 부식측정 방법인 선형분극 측정법 및 교류 임피던스법을 이용하여 염화물 및 방청제의 영향을 평가하였다. 마크로/마이크로 셀 부식측정기 Calcium Nitrite 방청제가 첨가된 시험체의 경우 갈바닉 전류 측정결과 낮은 전류값을 유지하였고, 교류 임피던스 측정결과 분극저항의 감소가 나타나지 않았으므로, 방청제의 첨가가 콘크리트내 철근의 부동태 피막을 보호하여 부식저항성을 향상시킴을 알 수 있었다.

• 대한치과보철학회:학술대회논문집
• /
• 2000.11a
• /
• pp.70-70
• /
• 2000

• Economic and Environmental Geology
• /
• v.20 no.3
• /
• pp.197-201
• /
• 1987

Negative induced polarization (IP) responses are examined for a three-layered earth using a digital linear filter method. The negative IP response can occur when the geoelectric section is of type K or Q. The section of type K creates a more pronounced negative effect than that of type Q. For such sections, IP coefficients are determined as a function of the resistivity distribution and the electrode configuration, and only the IP coefficient of the first layer can be negative. As a result, the negative IP response can occur when the first layer is polarizable in the section of type K or Q. and the polarizabilities of the other layers can act to depress the negative response.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2001.11a
• /
• pp.147-152
• /
• 2001

국내외적으로 철근부식에 영향을 받아 콘크리트가 변하는 특성을 실험적으로 연구한 논문이 많이 발표되고 있다. 본 연구에서는 이들 기존 연구에서 시행된 부식촉진방법, 주로 전기적인 방법을 다양한 실험을 통하여 최적방법을 찾고자 하는데 있다. 기존의 연구 중에는 "전위차 부식촉진법을 이용한 철근 콘크리트의 내부식성 예측을 위한 새로운 기법 연구"에서는 20V 직류전원장치를 NaCl용액에 직류회로를 구성한 후 양극과 음극의 전위차를 이용 전류량을 측정한 방법이 있었으며, 철근부식을 일으키는 많은 원인은 염소이온에 의한 것이다. 철근의 부식반응은 전기화학적 반응이다. 부식콘크리크 실험에 많이 이용하고 있는 자연전위법, 분극저항법, 콘크리트저항법들이 있다.(중략)

• Geophysics and Geophysical Exploration
• /
• v.25 no.3
• /
• pp.120-128
• /
• 2022

There are 17,000 reservoir dams in Korea, of which more than 85% were built over 50 years ago. Old embankment dams are weakened by internal erosion and suffusion phenomena due to preferential leakage paths and this ongoing weakening can cause their failure. Therefore, early warning associated with leakage in an embankment dam is crucial to prevent its failure. An electrical resistivity survey is a non-destructive, real-time and in-situ technique for detecting the development of leakage zones and general conditions of embankment dams. Because of its advantages, the electrical resistivity survey is widely used for reservoir safety inspections. However, the electrical resistivity survey is still not officially included in the precise safety inspection of reservoir dams because it cannot present a quantitative index of dam safety. In this study, we propose a method for calculating the leak index according to the water content evaluated from the electrical resistivity survey and/or induced polarization survey. Particularly, by proposing a quantitative leak index calculation method from monitoring surveys and independent surveys, we provide a theoretical basis for including electrical resistivity and induced polarization surveys as components of the precise safety inspection of reservoirs dams.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.321-327
• /
• 2006

In this paper, when a H-polarized plane wave is incident on the grating consisting of uniform resistive strips, electromagnetic scattering is analyzed using the moment of methods (MoM). The current density of each resistive strip on a grounded dielectric plane is fixed by zero at both edges. To satisfy the condition at both ends of each resistive strip, the induced surface current density is expanded in a series of cosine and sine functions. The scattered electromagnetic fields are expanded in a series of floquet mode functions. The boundary conditions are applied to obtain the unknown current coefficients. According to the variation of the involving parameters such as strip width and spacing and angle of the incident field, numerical simulations are performed by applying the Fourier-Galerkin moment method. The numerical results of the normalized reflected power for resistive strips case for zero and several resistivities are obtained.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.656-663
• /
• 2007

In this paper, when a E-polarized plane wave is incident on the grating consisting of tapered resistive strips, electromagnetic scattering is analyzed using the method of moments(MoM). The induced current density of each resistive strip in a grounded double dielectric layer is expected to blow up at both edges. To satisfy this, the induced surface current density is expanded in a series of Chebyshev polynomials of the second kind. The scattered electromagnetic fields are expanded in a series of Floquet mode functions. The boundary conditions are applied to obtain the unknown current coefficients. According to the variation of the involving parameters such as strip width and spacing and angle of the incident field, numerical simulations are performed by applying the Fourier-Galerkin moment method. The numerical results of the normalized reflected power for resistive strips case for several resistivities are obtained.