• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.2
• /
• pp.11-19
• /
• 2003

This paper proposes an algorithm to reduce the estimation error of surface spectral-reflectance(SR) using a conventional 3-band RGB camera. In the proposed method, estimation error can be reduced by using adaptive principal components(PCs) for each color region. In order to build adaptive set of PCs, n SR populations are organized for n PC sets by using Lloyd quantizer design algorithm. Macbetch ColorCheckcer is utilized as initial representative SR values for 1485 Munsell color chips of total color population and the Munsell chips arc divided subsets and a set of corresponding adaptive PCs per each subset is organized. As a result of experiments, the proposed method showed advanced estimation performance compared to both the two 3-band PCA methods and the 5-band wiener method.

• Journal of Korea Multimedia Society
• /
• v.4 no.1
• /
• pp.37-45
• /
• 2001

The studies to estimate the surface spectral reflectance of an object have received widespread attention using the multi-spectral camera system. However, the multi-spectral camera system requires the additional color filter according to increment of the channel and system complexity is increased by multiple capture. Thus, this paper proposes an algorithm to reduce the estimation error of surface spectral reflectance with the conventional 3-band RGB camera. In the proposed method, adaptive principal components for each pixel are calculated by renewing the population of surface reflectances and the adaptive principal components can reduce estimation error of surface spectral reflectance of current pixel. To evaluate performance of the proposed estimation method, 3-band principal component analysis, 5-band wiener estimation method, and the proposed method are compared in the estimation experiment with the Macbeth Color Checker. As a result, the proposed method showed a lower mean square error between the estimated and the measured spectra compared to the conventional 3-band principal component analysis method and represented a similar or advanced estimation performance compared to the 5-band wiener method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.68-68
• /
• 2001

본 논문에서는 단일 영상에 포함된 광원의 분광분포를 추정하는 광원추정 알고리즘을 제안한다. 제안된 광원 추정 방법은 두 단계로 이루어져 있다. 첫째, 변형된 회색계 가정(modified gray world assumption)을 이용하여 부분적으로 광원의 영향을 배제한 후 밝으면서도 무채색에 가까운 최대 무채색 영역을 찾아 그 영역의 표면 분광 반사율을 구한다. 이때 최대 무채색 영역의 표면 분광 반사율은 1269개의 Munsell 색 표본에 대하여 주성분 분석 방법을 이용하여 추정하였다. 둘째, 주어진 Munsell 색 표본과 대표 광원의 조합으로 반사광의 모집단을 만들었다. 다음 최대 무채색 영역의 각 화소와 반사광 모집단과의 색차를 비교하여 최대 무채색 영역과 색차가 가장 적은 반사광 표본을 선택하고 이를 최대 무채색 영역에 대한 반사광의 분광분포로 정의한다. 최종적으로 최저 무채색 영역의 반사광 분광분포를 해당하는 표면 분광반사율로 나누어줌으로써 영상에 포함된 광원의 분광분포를 추정한다. 제안한 알고리듬의 성능을 평가하기 위하여 유색 광원에 조명된 영상에 대한 광원 추정 실험을 하였으며 기존의 방법과 추정된 광원의 분광 분포 비교 및 색차 비교를 통해 그 타당성을 검증하였다.

• Journal of Korea Multimedia Society
• /
• v.4 no.2
• /
• pp.97-107
• /
• 2001

In this paper, an illuminant estimation algorithm of a chromatic digital images proposed. The proposed illumination estimation method has two phases. First, the surface spectral reflectances are recovered. In this case, the surface spectral reflectances recovered are limited to the maximum highlight region (MHR) which is the most achromatic and highly bright region of an image after applying intermediate color constancy process using a modified gray world algorithm. Next, the surface reflectances of the maximum highlight region are estimated using the principal component analysis method along with a set of given Munsell samples. Second, the spectral distribution of reflected lights of MHR is selected from the spectral database. That is a color difference is compared between the reflected lights of the MHR and the spectral database that is the set of reflected lights built by the given Munsell samples and a set of illuminants. Then the closest colors from the spectral database are selected. Finally, the illuminant of an image can be calculated dividing the average spectral distributions of reflected lights of MHR by the average surface reflectances of the MHR. In order to evaluate the proposed algorithm, experiments with artificial and real captured color-biased scenes were performed and numerical comparison examined. The proposed method was effective in estimating the spectral of the given illuminant sunder various illuminants.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.142-149
• /
• 2013

In general, a color of an image is represented by using red, green, and blue channels in a RGB camera system. However, only information of three channels are limited to estimate a spectral reflectance of a real scene. Because of this, the RGB camera system can not accurately represent the color. To overcome this limitation and represent an accurate color, researches to estimate the spectral reflectance by using a multi-channel camera system are being actively proceeded. Recently, a reflectance estimation method adaptively constructing a similar training set from a traditional training set according to a camera response by using a spectral similarity was introduced. However, in this method, an accuracy of the similar training set is reduced because the spectral similarity based on an average and a maximum distances was applied. In this paper, a reflectance estimation method applied a spectral similarity based on a correlation coefficient is proposed to improve the accuracy of the similar training set. Firstly, the correlation coefficient between the similar training set and the spectral reflectance obtained by Wiener estimation method is calculated. Secondly, the similar training set is constructed from the traditional training set according to the correlation coefficient. Finally, Wiener estimation method applied the similar training set is performed to estimate the spectral reflectance. To evaluate a performance of the proposed method with previous methods, experimental results are compared. As a result, the proposed method showed the best performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3A
• /
• pp.276-283
• /
• 2002

This paper proposes a new color constancy algorithm using the maximum luminance surface. This method uses a linear model which represents the characteristics of human visual system. The most important process of linear model is the estimation of the spectral distributions of illumination from an input image. To estimate of the spectral distributions of illumination from an input image, we first estimate spectral distribution functions of reflected light on the brightest surface. Then, we estimate surface reflectance functions corresponding to the maximum luminance surface using a principal component analysis of the given munsell chips. We finally estimate the spectral distributions of illumination in an image. Using an estimated illumination, we recover an image by scaling it regularly for the lightness calibration. From the experimental results, the proposed method was effective in recovering the color images compared with others.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.392-400
• /
• 2001

This paper proposes an illuminant estimation algorithm that estimates the spectral power distribution of an incident light source from a single image. The proposed illumination recovery procedure has two phases. First, the surface spectral reflectances are recovered in the maximum achromatic region (MAR) which is the most achromatic and highly bright region of an image after removing partially the effect of illumination using a modified gray world algorithm. Here, the surface reflectances of MAR are estimated using the principal component analysis method along with a set of given 1269 Munsell samples. Second, the Population of reflected lights is determined with 1269 Munsell samples and a set of illuminations then the spectral distribution of re(looted lights of MAR is selected from the spectral database. That is, color differences are compared between the reflected lights of the MAR and the spectral database, which is the set of reflected lights built by the given set of Munsell samples and illuminants. Then the closest colors from the spectral database are selected. Finally, the illuminant of an image can be calculated dividing the average spectral distributions of reflected lights of MAR by the average surface reflectances of the MAR. In order to evaluate the proposed algorithm, experiments with artificial scenes, which are exposed to chromatic illuminants, were performed and the spectral distribution of estimated illumination and color difference are compared with results of the conventional method.

• Korea Multimedia Society
• /
• v.7 no.2
• /
• pp.32-43
• /
• 2003

• Korean Journal of Remote Sensing
• /
• v.14 no.4
• /
• pp.343-352
• /
• 1998

Spectral reflectance data of upland crops at OSMI bands were collected and evaluated for the feasibility of crop discrimination knowledge-based on crop calendar. Effective bands and their ratio values for discriminating corn from two other legumes were defined with OSMI equivalent bands and their ratio values. For corn discrimination from two other legumes, peanut and soybean, June 22 among measurements dates was the best since all OSMI equivalent bands and their ratio values in June 22 were highly significant for corn separability. Phenological growth stage of a silage corn (rs510) could be estimated as a function of spectral reflectance in vegetative stage. Five growth stage prediction models were generated by the SAS procedures REG and STEPWISE with OSMI equivalent bands and their ratio values in vegetative stage.

• KCID journal
• /
• v.9 no.1
• /
• pp.29-37
• /
• 2002

Rapid environmental changes result in not only damage to agricultural produce but also the poor growth and death of plants. Remote Sensing (RS) is one of effective methods for collecting, analyzing information and predicting the change of agricultural env