• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.301-306
• /
• 2000

케이블 절연파괴 사고에 관한 여러 통계에서 사고원인을 검토하여 보면, 전기트리, 열화, 침수의 순서로 발생하였으며, 전기트리에 의한 사고가 60%이상을 차지하고 있다［1］. 전기트리에 관한 억제책으로는 제조공정상의 개선, 블렌드 또는 공중합체를 이용하는 방법 또는 첨가제를 혼합하여 특성을 개선시키는 방법 등이 있다. 공정상의 개선은 어느 정도 한계에 이르렀으며, 공중합체를 만드는 것은 반응기를 수정해야 하는 어려움이 따라 활발하게 이용되지 못하고 있다.(중략)

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.269-274
• /
• 2009

The main objective of this study was to establish optimum condition of wet grinding process for manufacturing microparticulated seaweed calcium. Process parameters such as concentration of forming agent, rotor speed, bead size, feed rate, and grinding time were adapted during wet-grinding of seaweed calcium. The particle size range of the raw seaweed calcium was 10-20 $\mu$m. The calcium particles were reduced to under 1 $\mu$m as nano scale after grinding. Gum arabic was suitable for forming agent and 5%(w/v) concentration was the most effective in grinding efficiency. A wet-grinding process operated at 4,000 rpm rotor speed, 0,4 mm bead size, and 0.4 L/hr feeding rate, respectively, produced less than 600 mm(>>90%)-sized particles. In batch systems, 8 cycles of grinding showed higher efficiency, but 20 min of grinding time in continuous processing was more efficient to reduce particle size than the batch processing. Based on the result, the optimum conditions of the wet grinding process were established: operation time of 20 minutes, rotor speed of 4,000 rpm, bead size of 0.4 mm, feed rate of 40 mL/min and 30% mixing ration with water. The size of the resulting ultra fine calcium particles ranged between 40 and 660 mm.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.1
• /
• pp.58-66
• /
• 2013

This study was conducted in order to develop slaughterhouse rumen content (SRC) as a potential feed additive. The moisture content of SRC can reach 80%, and therefore an appropriate dewatering process is required before it can be used. In this study, the effects of heating temperature, heating time, and filler content during the dewatering process on the activity of various enzymes in SRC were investigated. The Box-Behnken experimental design was employed, involving a total of 45 experimental runs, consisting of three variables (heating time, heating temperature, and filler content) with three levels per variable (12, 30 and 48 hr; 60, 75 and $90^{\circ}C$; 12, 22.5 and 33% for heating time, heating temperature, and filler content, respectively). For enzyme activities, xylanase, cellulase, and amylase were examined, and the results were subjected to an analysis of variance. Heating time, heating temperature and filler content had significant effects on the activity of each enzyme (p<0.05). Cellulase and amylase activities decreased (p<0.05) at elevated heating temperatures, whereas xylanase was reasonably stable around $90^{\circ}C$. The activities of all enzymes decreased (p<0.05) with increased heating time. Optimum filler contents for xylanase, cellulase, and amylase activities were 22.5, 12 and 33%, respectively. However, optimum conditions for all variables that simultaneously maximize the activity of all three enzymes could not be ascertained in this study. Nevertheless, the results from the current study can be useful as basic information for the development of SRC as a feed additive enriched with improved major enzymes for livestock feed digestion.

• Journal of Korean Society of Forest Science
• /
• v.80 no.2
• /
• pp.151-161
• /
• 1991

I tried to specify the taxa of Fagaceae in Korea by the character of their pollen grains. The light microscope(LM) and the Scanning electron microscope(SEM) were used to examine the pollen grains of 19 taxa, 5 genera. The result are as follows. 1. The pollen of Fagaceae in Korea could be grouped into four types and 4 subtypes. 1) Fagus type 2) Castanea type 3) Lithocarpus, Castanopsis type 4) Quercus type (1) Cyclobalanopsis subtype (2) Prinus subtype (3) Dentatae subtype (4) Cerris subtype. 2. The morphology of the granula on the pollen of Quercus was closely related to the differantiation of the shape of the cup scales. 1) The uniformity of branching granula on the pollen grain surface corresponds to the morphological features of the concentric arrangement of cup scales. 2) The morphological features of the pollen grain surface intermingled with large or small granula, simple-granula and tuber granula which have small points of circular prominence, corresponded to those of short cup scales. 3) The morphological features of the polllen grain surface intermingled with large or small granula, simple-granula and tuber granula with an apex of amoeba type corresponded to those of Q. dentata Thunb, with thin, fine and long cup scales. 4) The morphological features of the pollen grain surface intermingled with large of small granula of with only simple-granula, corresponded to those of Q. acutissima carr. with thick, fine and long cup scales. 3. The result of cluster analysis by coding the sculpture pattern of the pollen grain surface, the existence and nonexistence of surface perforate, the grain size and granula type were coincident with the system of classification of plants and showed an intimated relationship even under th level of species.

• Korean Journal of Plant Resources
• /
• v.16 no.1
• /
• pp.61-73
• /
• 2003

External and anatomical characters such as stem, leaf, ovary, calyx lobe, ultrastructure of stigma epidermis of leaf blade and midvein, corolla lobe, seed coat and pollen were examined on Pterygocalyx volubilis and Tripterospermum japonicum of Korean Gentianaceae. Fruit characters(capsule and berry), absent or not of corona and pollen characters(reticulate and striate) has been used by identification characters of two taxa. But study results, external characters(root, leaf, calyx lobe, stigma, anther), internal characters(calyx love, ovary) and ultrastructure characters(epidermis o leaf blade and midvein, corolla lobe, seed coat) were useful for species identification. Taxonomic relationships among problematic taxa were discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.284-288
• /
• 2003

In this paper, a mobile robot system which have trajectory of metal tape- type is designed and manufactured. The mobile robot for manless-transportation consists of sensor-part with ultrasonic and infrared sensor, motor-part with motor and encoder, user interface-part, central control-part and computer interface-part. The ultrasonic sensor detects obstacles which can appear during the mobile robot is move. The infrared sensor has ability which detect the metal tape trajectory and then lead the robot to a correct position. By using the mobile robot, the flexiblity of a moving trajectory is improved and cost which can happen in using a mobile robot system having trajectory is cut as well.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.163-163
• /
• 2011

풍력타워 기둥구조물에는 유지관리 등의 이유로 출입구 역할을 하는 개구부가 존재하게 된다. 다각형 타워구조물에 개구부형상이 존재하게 되면 압축좌굴 강도에 영향이 있을 것으로 예상되지만, 이를 정량적으로 평가하거나 예측하기는 용이하지 않고 간접적으로 판단할 만한 관련 기준이나 지침도 부족한 상태이다. 이에 최병호 등(2011)에서 다룬 다각형 단면 기둥구조물의 하단에 개구부를 형상화한 수치해석 모델을 수립하고 축방향 압축하중을 재하하는 탄성좌굴 해석 및 비선형비탄성해석을 수행하였다. 본 논문에서는 기존 다각형 단면 기둥모델 중에서 6각형 단면모델에 관해 중점적으로 다루고 있다. 다각형 단면 기둥 해석모델은 단순한 다각형 단면 타워구조에 대해서 뿐 만 아니라, 각 subpanel에 종방향 보강재를 둔 모델에 대해서도 추가적으로 검토하였다. 개구부의 형상은 높이 2000mm, 폭 800mm이며 상하부에 만곡부를 둔 형태이다. 수치해석은 3차원 유한요소해석프로그램인 ABAQUS를 이용하여 수행하였으며, 보강방안으로는 일정범위까지의 모듈 subpanel의 판두께를 보강하는 방안과 edge stiffener를 적용하는 방안에 대해서 검토하였다. 각각의 보강방식에 따른 효과를 비교해 보기 위해 개구부가 없는 모델, 단순히 개구부만 설정한 모델, 판두께를 보강한 모델, edge stiffener로 보강한 모델에 대해 비교해석을 수행하였다. 보강재 없는 단순 다각형 타워구조 모델에 대한 해석결과로부터 개구부로 인한 강도저하는 미미한 수준인 것으로 나타났다. 반면, 종방향 보강재가 적용된 6각형 단면 타워구조 모델에서는 개구부로 인한 강도저감이 22.9%로 높게 나타났으며 상당한 영향이 있는 것으로 분석되었다. 또한 개구부 주변의 판두께 보강이나 edge stiffener보강 등으로 상당한 강도향상 효과가 확인되었으나, 개구부로 인해 손실된 강도 수준을 완전히 회복하는 수준에 미치지 못하는 것으로 나타났다. 따라서, 향후 다양한 보강방식에 대한 보다 포괄적인 변수연구를 통해 개구부의 영향 없이 온전한 다각형 단면 타워 구조의 극한강도에 도달되기 위한 보강 조건에 대해 검토될 필요가 있을 것으로 사료된다.

• Journal of Korean Society of Forest Science
• /
• v.55 no.1
• /
• pp.1-21
• /
• 1982

The pollen morphology of 2 forms, 6 varieties, 50 species, 15 genera, 11 families of Korean Sapindales was studied. The keys were provided for general and families of Korean Sapindales. General pollen morphology was diversed and taxonomically significant differences were obtained in shape, aperture, type and size, sculpture pattern and exine thickness of pollen grains. Pollen grains of Korean Sapindales could be grouped into four types and five subtypes. One of five sub-types pollen grains of Acer could be ground into four under subtypes: ginnala type, barbinerve type, psseudo-sieboldianum type and negundo type. Pollen morphology of Empetraceae, Buxaceae and Balsaminaceae appeared to have very special features in the equatorial view and aperature type compare with pollen grain of the other families of Korean Sapindales.

• Journal of the Korean earth science society
• /
• v.33 no.2
• /
• pp.148-161
• /
• 2012

The intensive observation (ProbeX-2010) with 6-hour launches of radiosonde was performed over Seoul metropolitan area (Dongducheon, Incheon Airport, and Yangpyeong) from 13 Aug. to 3 Sep. 2010. Five typical heavy rainfall patterns occurred consecutively which are squall line, stationary front, remote tropical cyclone (TC), tropical depression, and typhoon patterns. On 15 Aug. 03 KST, when squall line developed over Seoul metropolitan area, dry mid-level air was drawn over warm and moist low-level air, inducing strong convective instability. From 23 to 26 Aug and from 27 to 29 Aug. Rainfall event occurred influenced by stationary front and remote TC, respectively. During the stationary frontal rainy period, thermal instability was dominant in the beginning stage, but dynamic instability became strong in the latter stage. Especially, heavy rainfall occurred on 25 Aug. when southerly low level jet formed over the Yellow Sea. During the rainy period by the remote TC, thermal and dynamic instability sustained together. Especially, heavy rainfall event occurred on 29 Aug. when the tropical air with high equivalent potential temperature (>345 K) occupied the deep low-middle level. On 27 Aug. and 2 Sep. tropical depression and typhoon Kompasu affected Seoul metropolitan area, respectively. During these events, dynamic instability was very strong.

• Journal of Chest Surgery
• /
• v.29 no.12
• /
• pp.1323-1328
• /
• 1996

The obstructive diseases involving the left main coronary artery(LMCA) are serious. Surgical treatment is generally regarded as much more effective than medical therapy in terms of long-term survival and relief of symptoms. This study represents an attempt to present an analysis of early surgical results in 21 cases conducted at Chonnam University Hospital between October 1992 And August 1995. The subject. 12 males and 9 female, ranged in age from 25 to 67 years with a mean age of 49.3${\pm}$12.5 years. As for indications for operation, unstable angina was reported on 66.7% of the subjects, while stable angina and acute myocardial infarction in 4 and 3 cases, respectively. There were also 2 cases of Takayasu's aortitis and 1 case of failed percutaneous translumlnal coronary angioplasty(PTCA). Eleven subjects had isolated LMCA diseases compared to 10 subjects with associated LMCA diseases. Of the patients with ass;3ciated LMCA diseases, 4 subjects had single coronary artery disease, 3 had double coronary artery disease, remaining 3 suffered from triple coronary artery disease. As for the group with isolated LMCA disease, ostidl angioplasty llsing autopericardium was conducted with 5 subjects. The remaining subjects with the isolated diseases and all of the patients with associated LMCA disease underwent aortocoronary bypass grafts. The left internal mammary artery was used in all patients and the average number of anastomoses was 3.13 ${\pm}$0.93. One subject died of low cardiac output syndrome at the second postoperative day. There were 5 instances of postoperative complication including reoperation for bleeding in two patients, wound infection in two, and arrhythmia in one. Follow-up coronary angiogram were conducted with eights patients, including five patients who underwent ostial angioplasty. In these cases, the patients showed surf. ficient enlargement of the left coronary ostium and the grafted vessels kept their patency. In our experience, surgical treatment of the LMCA diseases has not shown a higher rAte of operative mortAlity or morbidity than other obstructive coronary artery diseases. To patients with ostial stenosis, which is frequently observed among young female, angioplasly utilizing autopericardium seems to be a desirable choice considering the cosmetic effect, chances of reoperation and hemodynamic characteristics.