Jo, Kang-Ta;Keum, Moon-Hwan;Oh, Dong-Sung;Han, Sang-Kyoo
Proceedings of the KIPE Conference
/
2013.07a
/
pp.208-209
/
2013
본 논문은 다양하게 요구되는 정격사양을 하나의 충전기로 호환 할 수 있는 스마트 충전기를 제안한다. 제안 충전기는 부하시스템에 별도의 장치 없이 정격사양 인식 및 출력사양 가변이 가능하므로 부하시스템의 부담이 줄어든다. 제안 방식은 부하 시스템이 연결되면 부하의 출력사양을 인식하고 부하시스템이 요구하는 출력을 공급한다. 제안 회로의 타당성 검증을 위해 이론적 해석과 하나의 충전기에 3가지 출력사양을 인식시켜 호환되는 것을 확인하였다.
In this study, membranes were coupled to a sequencing batch reactor for simultaneous removal of organic matter and nitrogen, and the influences of MLSS (mixed liquor suspended solid) concentration and the sludge loading rate on membrane fouling and bioactivity were investigated. The amount of membrane fouling slightly increased with MLSS concentration at both non-aeration and aeration conditions, but effect of MLSS concentration was more significant at aeration condition. Although the effect of MLSS concentration on membrane fouling was found to be insignificant at low concentration level, extremely low sludge loading, which were generated by the maintenance of large amount of biomass in the reactor, caused severe membrane fouling, and air scouring effect decreased significantly in this condition. Specific bioactivity was constantly reduced as sludge loading rate decreased. In spite of high MLSS concentration over 17,000 mg/L, the activity of the reactor decreased at extremely low sludge loading rate presumably due to the lower oxygen transfer and the competition of biomass to deficient substrate.
Journal of the Institute of Electronics and Information Engineers
/
v.50
no.8
/
pp.151-161
/
2013
An active power factor correction (PFC) circuit is presented which employs a newly proposed input voltage sensor-less control technique operated in continuous conduction mode (CCM) and critical conduction mode (CRM). The conventional PFC circuit with input voltage sensor-less control technique degrades the power factor (PF) under the light load condition due to DCM operation. In the proposed PFC circuit, the switching frequency is basically 70KHz in CCM operation. In light load condition, however, the PFC circuit operates in CRM and the switching frequency is increased up to 200KHz. So CCM/CRM operation of the PFC circuit alleviates the decreasing of the PF in light load condition. The proposed PFC controller IC has been implemented in a $0.35{\mu}m$ BCDMOS process and a 240W PFC prototype is built. Experimental results shows the PF of the proposed PFC circuit is improved up to 10% from the one employing the conventional CCM/DCM dual mode control technique. Also, the PF is improved up to 4% in the light load condition of the IEC 61000-3-2 Class D specifications.
제약급전계획은 중앙급전발전기 및 중앙급전부하의 급전값을 산정하기 위해 각 급전주기마다 해당급전주기에 대하여 전력거래소가 예측한 비중앙급전발전기 및 비중앙급전부하에 대한 자료를 기초로 제약요소를 고려하여 작성하는 급전계획이다. 이 급전계획은 실제발전기와 부하의 출력 및 전력소비를 결정하므로 전력수급 조건, 발전기제약, 전력망제약, 보조서비스제약 등을 고려하여 전력의 시장거래가치를 최대화하도록 해야 한다. 본 논문에서는 제약급전을 결정함에 있어 선형계획법의 적용방법을 제시하고, 해의 수렴 개선을 위해 결정변수 및 제약조건의 수를 줄일 수 있는 방법을 제시한다.
The Journal of The Korea Institute of Intelligent Transport Systems
/
v.9
no.5
/
pp.67-71
/
2010
This paper proposes new dual-band impedance transformers based on the L-section circuit topology. The proposed circuits consist of a transmission line section with a stub line either at the source or at the load end. The dual-band operating conditions are analyzed in detail and simple design equations are derived in terms of the line lengths and impedances for the different circuit topologies and load conditions. The dual-band operation is confirmed through the design, fabrication and measurement in microstrip circuits based on the proposed method.
Proceedings of the Korea Society for Energy Engineering kosee Conference
/
2003.05a
/
pp.485-493
/
2003
2승 저감 형태의 부하특성을 갖는 공조용 팬이나 물을 순환시키는 펌프를 구동하는 전동기는 일반적으로 전원전압을 직입하여 사용한다. 따라서 전원 주파수인 60Hz가 회전속도의 기준이 되어 4극인 유도전동기를 예를 든다면 기준속도가 1800[rpm]이 되며, 이 속도는 부하 조건과 관계없이 운전되면서 경부하 조건에서는 불필요한 에너지를 많이 소모하는 원인이 되어왔다. 이런 문제점은 부하에 맞추어 속도를 제어해 줌으로써 소모전력을 현격히 줄일 수 있는데 이를 위해 일반적으로 인버터를 사용한다. 그런데 인버터에 대해서는 KS 기준이 없어 개인별 또는 기업체별로 가지고 있는 평가기준을 활용하여 인버터를 개발해 왔다. 이에 본 논문에서는 인버터 보급을 촉진시키기 위한 관련 정책을 분석하고 인버터에 대한 기술기준을 제시하여 인버터 평가기준을 보급하고자 한다.
저궤도 위성의 주요 부하는 대부분 잉여성을 지니게 설계되며, 위성 본체의 전압 및 전류의 변화에 대한 보호를 위해 밸러스트 회로가 추가적으로 요구 될 수 있다. 이중 휠은 위성의 기동에 사용되는 대용량 부하로 안정화를 위해 밸러스트회로의 설계가 추가적으로 필요하다. 이 논문에서는 이를 위해 위성의 운용상 발생할 수 있는 본체 전압의 Transition 조건 및 밸러스트회로의 모델링 분석을 진행하였으며, 모의실험을 위한 시뮬레이션 프로그램은 Matlab/silulink 및 PSIM을 이용하였다. 최종적으로 본체 전압의 변동 조건을 Inrush, Major/minor 및 Step/Frequency 부하 변동으로 나누었고, 2-port 모델링을 통해 밸러스트 회로의 구성 및 외란에 따른 영향성을 분석하고, 시뮬레이션을 통하여 검증 하였다.
본 논문에서는 y결선 된 7상 BLDC 전동기의 최대 효율 제어를 위한 새로운 권선 여자 방식을 제안한다. 다상 BLDC 전동기의 기본동작은 N상 (N-1)여자 방식이다. 하지만 여자되는 권선수를 감소시켜도 동작이 가능하다. 수중 추진 시스템의 동일한 부하 조건에서 다상 BLDC 전동기는 여자되는 권선수에 따라 발생하는 손실이 다르기 때문에 최대 효율 제어를 위해서는 여자되는 권선의 수를 조정해야 한다. 전동기의 동손과 인버터 시스템의 전기적인 손실은 기존의 논문과 IGBT 제조사의 애플리케이션 노트를 활용하여 계산이 가능하다. 따라서 동일한 부하조건에서 다상 BLDC 전동기의 여자되는 권선수에 대한 전기적인 손실과 전동기의 동손을 분석하고 최대 효율 운전을 위한 새로운 권선 여자 방식을 제안한다. 제안한 방법은 시뮬레이션 및 실험을 통해 검증하였다.
Kim, Jong-Gyeum;Park, Young-Jeen;Lee, Eun-Woong;Lee, Jong-Han;Lee, Dong-Ju
Proceedings of the KIEE Conference
/
2005.10c
/
pp.63-66
/
2005
전원을 공급받아 동작하는 전기기기는 안정된 품질의 전원이 필수적이지만, 실제 부하에 인가되는 전압품질은 이상적인 성질이 아닌 약간의 왜형된 파형을 가지고 있다. 특히 단상과 3상을 함께 이용하는 3상 4선식 설비의 경우 부하 임피던스에 의해 전압의 크기가 변동하는 경우가 있으며 또한 선형 및 비선형 부하를 함께 사용하는 경우에 전압품질의 변화가 높은 편이다. 이와 같은 조건하에서 가장 많은 에너지를 이용하는 유도전동기가 고조파 성분이 포함된 전압불평형조건에서 어떤 동작특성을 나타내는 가를 시뮬레이션을 통해 분석하고자 한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.