• Korean journal of food and cookery science
• /
• v.16 no.4
• /
• pp.358-362
• /
• 2000

To investigate the effect of sourdough on the quality characteristics of barley bread, sourdough starlet with Lactobacillus plantarum, Lactobacillus sanfrancisco and Enterococcus mundtii was used for baking after 48 hours incubation at 37$\^{C}$. The specific volume of the bread containing sourdough starter was greater than that the control. Retarding of the firmness was observed in the bread with Lactobacillus sanfrancisco compared with the control and other breads. Above results suggest that sourdough starter fermented by Lactobacillus can be used as natural bread improver.

• Applied Biological Chemistry
• /
• v.33 no.1
• /
• pp.18-23
• /
• 1990

Seven varieties of soybeans(Paldal, Danyeob, Jangbaek, Baegun, Jangyeob and 2 cultivars of Local 1 and Local 2) were investigated to compare the water uptake properties and volume changes during soaking in water. The hydration properties showed that the equilibrated weight increase ratio decreased as the soaking temperature raised to higher than $40^{\circ}C$, while the initial water uptake rate increased upto $80^{\circ}C$. The increase in hydration showed a linear relationship with the square root of the soaking time at $4^{\circ}{\sim}60^{\circ}C$. Local 1 was the highest in water uptake rate constant while Local 2 was the lowest. The activation energy calculated was in the range of $3,246{\sim}4,694\;cal/mole$. The Jangbaek and Local 1 were the highest and the Paldal was the lowest in the rate of volume increase. The activation energy for volume increase was in the range of $3,310{\sim}4,190\;cal/mole$. The z-values calculated from volume change was a little higher than those obtained from weight change.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.760-765
• /
• 2013

Lysozyme crystallization was performed by using flow-focusing chip in droplet-based microfluidic system. Water-in-oil droplets were formed in the system and collected on petri-dish and cross type mold. Liquid-liquid reaction of lysozyme and sodium chloride occurred in the droplet and crystals were observed through microscope. Solution pH was varied as 4.8 and 7.2. Crystals of polyhedron and plate-like shape were obtained at pH 4.8, while needle structure crystals formed at pH 7.2. Lysozyme in single droplet for two pHs were crystallized with constant or decreased droplet size. However, crystals at pH 4.8 were only obtained in the droplet of which size was increased by the interaction between droplets. Droplet volume did not change at pH 7.2 and crystals formed in both droplets.

• Journal of the Korean Society of Radiology
• /
• v.6 no.6
• /
• pp.489-493
• /
• 2012

Positron Annihilation Lifetime Spectroscopy is a non-destructive technique to study voids and defects in solids by the measurement of gammas from electron-positron annihilation. In this study, we measured the lifetime of CR, EPDM, NBR, all of which are widely used polymer in various fields. A conventional fast-fast coincidence system in KAERI(Korea Atomic Energy Research Institute) has been used to measure the lifetime spectra, Three lifetime components were analyzed from each lifetime spectra. According to Tao-Eldrup model equation, the size and fraction of free-volume were calculated. Mean radius and free volume fraction of CR, EPDM NBR are $0.1217nm^3$(1.9103%), $0.14780nm^3$(5.3147%), $0.1216nm^3$(2.6381%), respectively. Through these measurements, we identified the feasibility of the PAL system for polymer analysis.

• The Korean Journal of Zoology
• /
• v.36 no.4
• /
• pp.562-579
• /
• 1993

출생후 발생에 따른 흰쥐 전뇌 기저부의 Mevnert 기저핵(nucleus basalis of Mevnert)에서 신경성장인자 수용체(nerve growth factor receptor, NGFr)를 함유하는 신경세포의 면역반응성 및 분포, 세포형의 분류, 각 형별 출현율 및 세포 크기 그리고 세포소기관과 NGFr 면역반응과의 관계를 조사하였다. NGFr 면역반응 신경세포들은 출생후 초기 발생에서 세포질 뿐만 아니라 원형질 막에서도 면역반응을 보였으나, 성체에서는 세포질에서만이 면역반응을 보였다. NGFr 면역반응 신경세포는 형태학적 특징인 세포체의 모양과 장·단축의 비를 기준으로 5가지 형, 즉 1) 원형, 2) 난형, 3) 세장형. 4) 방추형, 5) 삼각형(또는 다각형)세포로 구분되었다 원형과 난형 세포는 출생후 0일에서 각각 15.4%. 50.7%의 높은 출현율을 보였으나, 발생이 진행되면서 점차 감소하여 성체에서 각각 7.8%, 28.6%의 출현율을 보였다 반면, 세장형, 방추형 및 삼각형세포는 출생후 0일에서 각각 22%, 2.6% 9.2%의 낮은 출현율을 보였으나, 발생이 진행되면서 지속적으로 증가하여 성체에서는 각각 29 9%, 5.2%, 28.5%의 높은 출현율을 보였다. 출생후 0일에서 신경세포체의 부피는 매우 작았으나(1,642mm3), 발생에 따라 점차 증가하여 14일, 21일에서는 성체에서보다 매우 컸다(각각 6.745, 6,755mm3) 원형 및 난형세포체의 부피는 21일에서(각각 7 955. 7.020mm3), 세장형 방추형 그리고 삼각형세포체의 부피는 14일에서 제일 컸다(각각 7,067, 6,237, 7,748 mm3) 대체적으로 삼각형세포체의 부피가 제일 컸으며, 방추형세포체의 부피가 제일 작았다. 출생후 순일에서의 전자현미경적 관찰에서 세포소기관중 조면소포체, Golgi체, multivesicular body 그리고 세포표면 원형질막이 강한 NGFr 면역반응을 보였다. 위의 결과들로 미루어 MGFr은 출생후 흰쥐 전뇌 기저부 Meynert 기저핵 신경세포의 분화 및 분포와 밀접한 관계를 갖는 것으로 생각된다.

• School Mathematics
• /
• v.19 no.3
• /
• pp.617-638
• /
• 2017

In order to make a connection in teaching similar concepts between mathematics and science in teaching similar concepts, this paper analyzed the contents related to capacity, volume, weight, and mass in the mathematics and science textbooks aligned with the national elementary curriculum. We first explored when to present such topics in both textbooks, and then analyzed in what ways the topics were addressed in terms of quantitative comparison, vocabulary, units of measurement, measurement, tools for measurement, estimation, and connections to real life. The results of this study showed that there were some aspects emphasized in common both in mathematics and science textbooks. The analysis of this study also demonstrated subtle but considerable differences according to the characteristics of two subject matters. Based on these results, this paper provides implications for elementary school teachers to consider in teaching capacity, volume, weight, and mass through mathematics and science lessons.

• The Korean Journal of Nuclear Medicine
• /
• v.32 no.5
• /
• pp.403-413
• /
• 1998

Purpose: We investigated reproducibility of the quantification of left ventricular volume and ejection fraction, and grading of myocardial wall motion and systolic thickening when we used gated myocardial SPECT and Cedars quantification software. Materials and Methods: We performed gated myocardial SPECT in 33 consecutive patients twice in the same position after Tc-99m-MIBI SPECT We used 16 frames per cycle for the gating of sequential Tc-99m-MIBI SPECT. After reconstruction, we used Cedars quantitative gated SPECT and calculated ventricular volume and ejection fraction (EF). Wall motion was graded using 5 point score. Wall thickening was graded using 4 point score. Coefficient of variation for re-examination of volume and fraction were calculated. Kappa values (k-value) for assessing reproducibility of wall motion or wall thickening were calculated. Results: Enddiastolic volumes (EDV) ranged from 58 ml to 248 ml (122 ml +/- 42 ml), endsystolic volumes (ESV) from 20 ml to 174 ml (65 ml +/- 39 ml), and EF from 20% to 65% (51% +/- 14%). Geometric mean of standard deviations of 33 patients was 5.0 ml for EDV, 3.9 ml for ESV and 1.9% for EF. Their average differences were not different from zero (p>0.05). k-value for wall motion using 2 consecutive images was 0.76 (confidence interval: 0.71-0.81). k-value was 0.87 (confidence interval: 0.83-0.90) for assessment of wall thickening. Conclusion: We concluded that quantification of functional indices, assessment of wall motion and wall thickening using gated Tc-99m-MIBI SPECT was reproducible and we could use this method for the evaluation of short-acting drug effect.

• Journal of Aerospace System Engineering
• /
• v.10 no.4
• /
• pp.26-34
• /
• 2016

In a number of industries, porous insulations have been frequently used, reducing thermal insulation space through excellent performance of the thermal insulation's characteristics. This paper suggests an effective thermal conductivity prediction model. Firstly, we perform a literature review of traditional effective thermal conductivity prediction models and compare each model with experimental heat transfer results. Furthermore, this research defines the effectiveness of thermal conductivity prediction models using experimental heat transfer results and the Zehner-Schlunder model. The newly defined effective thermal conductivity prediction model has been verified to better predict performance than other models. Finally, this research performs a transient heat transfer analysis of a thermal protection system with a porous insulation in a high speed vehicle using the finite element method and confirms the validity of the effective thermal conductivity prediction model.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.102-107
• /
• 2017

To estimate the bulk density applying the composition rate for recyclable residential waste, the composition rates by volume and weight basis, the bulk densities of the separated and commingled wastes were investigated four times respectively for recyclable waste of 1,800 kg transported to waste recovery facility. The bulk densities for separated wastes were $379.0kg/m^3$ of glass bottles that is highest and metals, residues, others, cans, plastics in order. The composition rates for each separated waste were changed widely depending on either volume basis or weight basis. The composition rate by weight basis as 40.6% of the glass bottles, 32.6% of the plastics were changed to 60.2% of the plastics and 8.9% of the glass bottles in that by volume basis. The bulk density of the commingled wastes applying the composition rate by volume basis showed the similar value to the measured density than by weight basis. So it was estimated that the composition rate by volume basis was appropriate for determining the bulk density of the commingled recyclable wastes.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.256-261
• /
• 2013

The spacing between plug cells and cell volume of each plug cell for nursing tomato seedlings were studied to know the effects on seedling growth and early yield. There were four treatments. The spacing of plug cells was done (OK) or not (NO) in case of cell spacing. The cell number in a plug tray was set to 40 or 50 in case of cell volume. The growth environment and irrigation regime were the same in all of the treatments during the experiment period. The photosynthetic rates, seedling qualities, yield and yield speed were significantly affected by both of the treatments. The photosynthetic rates and seedling qualities were the best in 40S-OK following by 50S-OK, 40S-NO, and 50S-NO while the yield was the best in 40S-OK following by 40S-NO, 50S-OK, 50S-NO. It means the spacing gives more impact than the cell volume in the stage of nursing but the cell volume gives more impact than the spacing after the stage of nursing. In the conclusion the spacing of plug cells in appropriate nursing stage is needed with the appropriate cell volume to make high quality of seedlings and high yield.