• Journal of Environmental Impact Assessment
• /
• v.22 no.6
• /
• pp.667-676
• /
• 2013

This study analyzed the energy demand, greenhouse gas emission and greenhouse gas reduction potential of Electronic Electrical components company. The LEAP model targeting long term energy plan was used to establish the most efficient plan for the companies by examining the climate change policy of government and the countermeasures by companies. A scenario was created by having 11 greenhouse gases reduction plans to be introduced from 2011 as the basic plan. Regarding input data, energy consumption by business place and by use, number of employee from 2009 to 2012, land area and change in number of business places were utilized. The study result suggested that approximately 13,800 TJ of energy will be spent in 2020, which is more than 2 times of 2012 energy consumption. When the integrated scenario based on the reduction plan of companies would be enforced, approximately 3,000 TJ will be reduced in 2020. The emission of greenhouse gases until 2020 was forecasted as approximately 760,000 ton $CO_2eq$. When the integrated scenario would be enforced, the emission will be approximately 610,000 ton $CO_2eq$, which is decrease by approximately 150,000 ton $CO_2eq$. This study will help the efficient responding of eElectronic Electrical components company in preparing detail report on objective management system and enforcement plan. It will also contribute in their image as environment-friendly companies by properly responding to the regulation reinforcement of government and greenhouse gases emission target based on environment policy.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.7
• /
• pp.703-708
• /
• 2013

Conventional total hip joint replacement(THR) surgery requires a long incision and long rehabilitation time. The stem used in THR is inserted into the cancellous bone of the femur where it plays the role of the artificial joint. Minimally invasive surgery(MIS) has been devised to reduce muscle damage to patients. In this study, a mechanical stem was developed on the basis of MISto reduce the incision length through the principle of the gear. The mechanical stem consists of six components. A prototypical model for a mechanical stem was fabricated using an acryl-based polymer, and its workability was confirmed. To actualize the mechanical stem, a three-dimensional Bio-CAD modeling technique was applied. The hip joint area based on computed tomography(CT) was reconstructed. The safety of the mechanical stem by applying more load than the weight of a man under virtual surgery environment conditions was confirmed by finite element analysis.

• Environmental and Resource Economics Review
• /
• v.14 no.2
• /
• pp.291-336
• /
• 2005

This paper investigates how oil price changes have an impact on the Korean manufacturing production activities. For this investigation, we use a structural VAR motel to estimate impulse response functions of industrial production, producer price and export price to an oil price increase over manufacturing industries. It finds that in most manufacturing industries, an oil price increase leads to decreases in industrial productions and domestic prices except energy intensive industries, but to increases in industrial export prices except non-metallic (26), computers and offic machinery (30), electronic components, radio, television and communication (32) industries. This result explains that an oil price increase makes negative impacts on the manufacturing production activities not only through demand slowdown in the domestic markets but also through supply contraction in the export markets.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.4
• /
• pp.19-29
• /
• 2012

According to the result of PISA and TIMSS, it was reported that interest for Math and Science was far lower compared to high achievement of Them. The purpose of this study is to investigate effects of robot based STEAM education on elementary school students' Math learning behavior and Science motivation. Robot based STEAM education integrated science, mathematics and art with a theme of 'Energy' was practiced for test group and For control group, those three subjects were taught separately in order to achieve this purpose. Curriculum of fourth grade second semester's science, mathematics and art was analysed to teach a robot based STEAM class and STEAM class Model with the theme 'Energy was designed and applied to elementary students. In science class, heat transfer experiment was conducted with robots and the result was related to drawing polygonal lines in mathematics. In art class, robot components were used to describe the heat energy in shapes and colors. The research shows that students' Math learning behavior and Science motivation were improved more with robot based STEAM education than with traditional lessons(p<.05). It proves that robot based STEAM class can be effective for improving interest in elementary Math and Science.

• Journal of the Korean Society for Railway
• /
• v.11 no.4
• /
• pp.424-432
• /
• 2008

This paper presents theoretical explanations about the spill-over effects of domestic production of light rail transit and empirically investigates its effects on output, value-added and employment in the Korean economy. We distinguish net gains of domestic production from gross effects that bring about whether localized or imported cars are used. The input-output analysis is employed to fully capture the interaction among various industries involved. The empirical results reveal that net gains of domestic production such as import substitution, improvement of trade balances, and increase in output, value-added and employment are enormous. The cost reduction in construction, E&M systems, cars, management, and tariff and transportation is also significant.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.12
• /
• pp.1040-1047
• /
• 2012

This paper presents a fault diagnosis algorithm of control surfaces of small fixed-wing aircraft to reduce maintenance cost or to improve repair efficiency by estimation of fault occurrence or part replacement periods. The proposed fault diagnosis algorithm consists of ANPSD (Averaged Normalized Power Spectral Density), PCA (Principle Component Analysis), and GC (Geometric Classifier). ANPSD is used for frequency-domain vibration testing. PCA has advantage to extract compressed information from ANPSD. GC has good properties to minimize errors of the fault detection and isolation. The algorithm was verified by the accelerometer measurements of the scaled normal and faulty ailerons and the test results show that the algorithm is suitable for the detection and isolation of the control surface faults. This paper also proposes solutions for some kind of implementation problems.

• Korea Trade Review
• /
• v.48 no.1
• /
• pp.193-213
• /
• 2023

The impact of each country's environmental protection and climate change policies on trade is increasing. The strengthening of trade barrier resulted in an increase of Technical Barriers to Trade(TBTs). This international trend carries important implications for Korean manufacturers, which is highly dependent on trade. Discussions on the trade effects of TBT are still ongoing. This study that quantitatively analyzed the effect of TBT on trade have employed a gravity model. As a result of the analysis using the basic model, it was found that the effect of environmental TBT notifications on trade is positive(+) overall. However, the electrical machinery and equipment·electronics industries are negatively affected by environmental TBT. There is a pressing need to preemptively identify the impact of environmental TBT in major countries on the exports of Korean manufacturing industries in order to strengthen the competitiveness of domestic industries and pursue countermeasures.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.11
• /
• pp.949-956
• /
• 2016

There are a number of effects by solar radiation in many aerospace industrial fields, such as degradation of mechanical properties, sealing effect of sealants or decolorization. Because it takes long time to investigate these effects by using the light of natural state, new methods are developed for accelerating this phenomenon. In this paper, we developed an apparatus to simulate accelerated solar radiation phenomenon selecting irradiation intensity $1,120W/m^2$ as the designed environment. Epoxy polymer as the composite material was chosen and processed by ASTM-D638, a reference for tensile test of polymer and plastic. Total color shift was selected as the test category to evaluate acceleration of the test. We obtained acceleration factors and numerical model from test data and concluded it can shorten test periods by accelerated irradiation intensity of $1,120W/m^2$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.179-190
• /
• 2020

This research analyses the financial characteristics of corporate R&D intensity in the Korean capital market. It is important to pay greater attention to this subject, given the current situation of the shortage of core components domestically in Korea. Three hypotheses are postulated to investigate the financial factors of R&D investments for KOSDAQ-listed firms during the post-era of the global financial turmoil. By applying a conditional quantile regression (CQR) model, three variables included R&D intensity in the previous year (Lag_RD), the squared term of Lag_RD, and interaction between the high-tech sector and Lag_Rd, reveal significant effects on the current R&D ratio. Whereas more than half of the total variables show variable impacts between firms with higher and lower R&D intensity, only Lag_RD and squared term of Lag_RD were found to be significant. It is expected that these results may contribute to being financial catalysts for an optimal level of R&D expenditures, thereby maximizing firm value for shareholders in KOSDAQ-listed firms.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.44-44
• /
• 1999

저진공(1 kPa~ 100 kPa)은 대기압 측정, 비행고도, 기체의 온도 측정, 질량의 부력 보정, 레이저의 굴절률 측정등에 사용되는 영역으로 과학적 중요성을 갖고 있다. 또한 대기압 이상의 압력 측정과 고진공 측정의 경계적 역할도 수행하고 있어 압력 표준기의 국제 비교에 필수적으로 권장되는 역역이다. 이 영역에 주로 사용되는 압력 표준기는 수은 압력계(Mercury manometer)와 분동식 압력계(Deadweight piston gauge or Pressure)가 있다. 이들은 이동이 불편하거나 불가능하므로 표준기의 국제 비교에 사용되는 전달 표준기로는 보다 이동이 간편한 탄성 압력계인 CDG(Capacitance diaphragm Gauge)가 있다. 이 게이지는 반도체 산업의 공정 제어용으로도 많이 사용되고 있다. 그러나 게이지와 함께 사용되는 컨트롤러의 부피가 크고 무거우며 영점 이동이 커서 측정때 마다 재조정하여야 하는 단점이 있다. 본 논문에서는 이 같은 단점을 극복하기 위해 수정빔 진동형 진공 센서를 잔달 표준기로 사용하는 것에 대한 연구를 수행하였다. 수정빔 진동형 압력 센서는 수정빔으 공진주파수가 스트레인에 비례하는 것을 이용하여 제작된 센서로 주로 대기압 이상의 고압 측정에 많이 사용되고 있다. 먼저 수정빔의 압력과 주파수간의 관계를 측정하고 또한 내장된 수정 온도센서의 공진 주파수를 측정하여 온도 보상을 위한 자료로 사용하였다. 규격에 나와 있는 수정빔의 기하학적 형상으로부터 거동에 관한 이론 모델식을 구하고 압력교정 자료로부터 얻어진 데이터를 이 식과 비교 분석하여 적합한 특성식과 인자를 구하였으며 게이지의 불확도를 추정하였다.모델은 길이가 유한한 0-차원 실린더 모델로 가정하였고, 이에 대한 기하학적 성질 및 열역학적 성질은 유효계수를 고려하여 산출하였다. 진공용기 이중 벽 내부로 흐르는 질소가스의 유량과 온도의 계산은 진공용기 내벽과 외벽을 각각 독립적인 열전달 요소로 가정하여 구성한 모델을 이용하였다. 전체 해석에서 각 열전달 요소의 비열 값은 온도에 따라 변화하는 비열의 특성을 반영하였으며. 진공용기와 플라즈마 대향 부품의 방사율(emissivity)은 앞서 가정했던 각 온도 상승 곡선에 대해서 각각 0.1, 0.2, 1.3의 경우를 가정하여 계산하였다. 직선적으로 증가하는 온도 상승 곡선중 2$0^{\circ}C$/hr의 온도상승율을 갖는 경우가 다른 베이킹 시나리오 모델에 비해 효과적이라 생각되며 초대 필요 공급열량은 200kW 정도로 산출되었다. 실질적인 수치를 얻기 위해 보다 고차원 모델로의 해석이 필요하리라 생각된다. 끝으로 장기적인 관점에서 KSTAR 장치의 베이킹 계획도 살펴본다.습파라미터와 더불어, 본 연구에서 새롭게 제시된 주기분할층의 파라미터들이 모형의 학습성과를 높이기 위해 함께 고려된다. 한편, 이러한 학습과정에서 추가적으로 고려해야 할 파라미터 갯수가 증가함에 따라서, 본 모델의 학습성과가 local minimum에 빠지는 문제점이 발생될 수 있다. 즉, 웨이블릿분석과 인공신경망모형을 모두 전역적으로 최적화시켜야 하는 문제가 발생한다. 본 연구에서는 이 문제를 해결하기 위해서, 최근 local minimum의 가능성을 최소화하여 전역적인 학습성과를 높여 주는 인공지능기법으로서 유전자알고리즘기법을 본 연구이 통합모델에 반영하였다. 이에 대한 실