• Water for future
• /
• v.54 no.11
• /
• pp.25-33
• /
• 2021

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.71-72
• /
• 2008

과학기술위성3호 부탑재체로 영상분광기(COMIS, Compact Hyperspectral Imager)가 선정되어 2007년 5월부터 개발이 진행되고 있다. COMIS는 2010년 과학기술위성3호에 탑재 발사되어, 위성 궤도 700km 상공에서 해상도 30m을 가지고, 30km 폭의 지표면 또는 대기를 관측할 수 있다. 현재까지 국내에서 개발된 위성탑재 지구관측카메라가 흑백이거나 다분광(3파장)으로 지구관측을 하는 것에 반하여 COMIS는 가시광 및 근적외선 영역에서 16${\sim}$62대역(4${\sim}$15nm 파장 분해능)의 초분광 관측을 수행하게 된다. 초분광 영상은 관측 대상 물성의 상세 구분이 가능한 관계로 군사적 활용을 포함한 원격 탐사의 주요 활용 분야로 대두되고 있다. 본 논문은 과학기술위성3호 부탑재체로 개발되는 영상분광기인 COMIS(Compact Hyperspectral Imager)의 전반적인 개념, 활용 과학을 먼저 소개하고 상세 광학 설계를 발표한다.

• Journal of Aerospace System Engineering
• /
• v.11 no.2
• /
• pp.30-34
• /
• 2017

This paper is concerned with product assurance for the secondary payload, which is used for technology and science research, in the satellite system, which consists primarily of the spacecraft and the primary payload (a high-resolution optical camera). The Korean satellite development program has successfully insured the safety of the spacecraft and primary payload. However, given the limits of budget and schedule, it is very important to establish adequate product assurance for the secondary payload, which has a lower priority than the spacecraft or primary payload. This paper studies the concept of product assurance for the secondary payload of technological and scientific equipment.

• Proceedings of the KSRS Conference
• /
• 2001.03a
• /
• pp.149-153
• /
• 2001

고해상도 카메라가 다목적 실용위성 2호의 탑재체로서 한국항공우주연구원에서 개발되고 있다. 이 카메라에는 Ground sample distance (GSD)가 1m에 달하는 PAN(panchromatic channel)과 GSD 4m인 MS (Multi-Spectral channel)가 있다. 이 목표를 성취하기 위하여 탑재체와 위성체의 요구저건들을 설정하고 그에 따른 설계작업이 현재 진행 중이다. 탑재체는 광학부, 기계부, 전자부, 자료전송부들로 구성되어 있는 데, 각 서브시스템간에 상충되는 점들을 전체 시스템 측면에서 분석, 판단, 조정하고 또한 위성체와의 접속도 원활하게 진행시키고 있다. 실제로 광학 설계, Sun shield 등에서 여러 가지의 설계중에서 최적의 방안을 선택하는 데 시스템 측면에서 고려가 되었었다. 본 논문에서는 이러한 시스템 측면에서의 고해상고 카메라의 요구조건과 기본설계에 대해 발표한다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.98-99
• /
• 2003

2005년 국산 소형위성 발사체에 탑재되어 발사 될 예정으로, 과학기술위성2호의 개발이 2002년 10월부터 시작되었다. 과학기술위성2호는 약 100kg의 소형위성으로, 경사각 60～80$^{\circ}$의 300km x 1500km 타원궤도에 발사될 것으로 예상되고 있으며, 라만-a태양촬영망원경(LIST, Larman-a Imaging Solar Telescope)과 레이저정밀거리측정용 반사경이 각각 주 및 부 탑재체로 탑재될 예정이다. 위성레이저정밀거리측정(SLR, Satellite Laser Ranging)이란 위성간의 거리를 가장 정확하게 측정할수 있는 축지학적 기술이다. (중략)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.2
• /
• pp.80-88
• /
• 2003

This paper describes the development of an ozone detector and an electron probe as parts of scientific payloads for sounding rockets such as the KSR-III. Each detector consists of sensor parts and electronic parts. We successfully carried out the calibration tests with developed ozone detector and the space plasma simulation chamber tests with electron detector. These payloads could be onboard the KSR-III and with measured data, it is expected and temperature profile over the Korean Peninsular.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.60-64
• /
• 2005

STSAT-2 will demonstrate the scientific mission(acquisition of brightness temperature of the earth at 23.8 GHz and 37 GHz) and spacecraft technologies(laser ranging, frame-type satellite structure, Dual-head star tracker, CCD sun sensor, pulsed plasma thruster, etc.). In this paper STSAT-2 satellite system is described. It includes the definition of the system and the overview of payloads and BUS.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.83-90
• /
• 2002

This paper describes the development of scientific payload system onboard the KSR-III. The ozone detector(UVR), Langmuir electron probe(LEP), airglow photometer(AGP), and magnetometer(MAG) constitute this system. The purpose of the ozone detector is to measure the ozone density profile and the LEP measures the electron density and temperature in the ionosphere over the Korean Peninsula. The AGP detects airglow in the mesosphere over the Korean Peninsular. The MAG provides rocket attitude and the magnetic fluctuation information during the flight. With the developed payloads, the ground calibration tests and the environmental tests have been performed.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.359-365
• /
• 2021

GEO-KOMPSAT-2A (GK2A) AMI (Advanced Meteorological Imager) Best Detector Select (BDS) map is pre-determined and uploaded before the satellite launch. After the launch, there is some possibility of a detector performance change driven by an abrupt temperature variation and thus the status of BDS map needs to be evaluated and updated if necessary. To investigate performance of entire elements of the detectors, AMI BDS analyses were conducted based on a technical note provided from the AMI vendor (L3HARRIS). The concept of the BDS analysis is to investigate the stability of signals from detectors while they are staring at targets (deep space and internal calibration target). For this purpose, Long Time Series (LTS) and Output Voltage vs. Bias Voltage (V-V) methods are used. The LTS for 30 secs and the V-V for two secs are spanned respectively for looking at the targets to compute noise components of detectors. To get the necessary data sets, these activities were conducted during the In-Orbit Test (IOT) period since a normal operation of AMI is stopped and special mission plans are commanded. With collected data sets during the GK2A IOT, AMI BDS map was intensively examined. It was found that about 1% of entire detector elements, which were evaluated at the ground test, showed characteristic changes and those degraded elements are replaced by alternative best ones. The stripping effects on AMI raw images due to the BDS problem were clearly removed when the new BDS map was applied.

• Aerospace Engineering and Technology
• /
• v.13 no.2
• /
• pp.115-121
• /
• 2014

GEO-KOMPSAT-2 (GK2) program, which develops two advanced geostationary satellites simultaneously after the successful COMS mission (2010~present), is on going. An improved next generation meteorological payload and space weather sensors will be equipped on the GK2A. The space weather sensor will be the Korea's first geostationary space environment monitoring payload. Main objectives of the project are its applications into space weather forecasting and pre-warning of hazardous space weather by monitoring physical phenomena such as distribution of high energetic particles, Earth's magnetic fields and charging currents on the spacecraft at a geostationary orbit using the three space weather sensors(energetic particle detector, magnetometer and charging monitor). The summary of the GK2A space weather sensor development and its system and interface designs were described in the paper.