• Korean Journal of Environment and Ecology
• /
• v.31 no.6
• /
• pp.578-585
• /
• 2017

This study was intended to analyze the visitors' awareness of the cultural asset value of Marsh Plants of Daesong-ri, Haman (Natural Monument 346) as well as the requirement for use and management of the only marsh designated as a National Monument in order to provide the implication for future management. The result of the analysis showed that the public awareness and the awareness level of the natural monuments were low and that the motivations for visiting were the experience and education of nature, rest and leisure, and experience of the cultural heritage, in that order. The analysis of motivation for visiting according to the awareness level showed that the group with a high awareness level of the Marsh Plants or the group that thought highly of its cultural asset value tended to visit it more for the experience of nature or the experience of the cultural heritage than for simple resting. For usage, the visitors required the basic amenities such as guide board and the more active promotion. They also preferred the discovery of traditional resources using the marsh plants and the experience of nature. Both local residents and outside visitors pointed out the lack of systematic management policy and lack of communication with local residents as the main problems. They recognized that the policy that balanced the preservation and usage through the cooperation of various stakeholder including local residents must be established and applied in the field to ensure proper management.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.2
• /
• pp.99-112
• /
• 2013

This paper presents a subspace system identification for estimating the stiffness matrix and flexural rigidities of a shear building. System matrices are estimated by LQ decomposition and singular value decomposition from an input-output Hankel matrix. The estimated system matrices are converted into a real coordinate through similarity transformation, and the stiffness matrix is estimated from the system matrices. The accuracy and the stability of an estimated stiffness matrix depend on the size of the associated Hankel matrix. The estimation error curve of the stiffness matrix is obtained with respect to the size of a Hankel matrix using a prior finite element model of a shear building. The sizes of the Hankel matrix, which are consistent with a target accuracy level, are chosen through this curve. Among these candidate sizes of the Hankel matrix, more proper one can be determined considering the computational cost of subspace identification. The stiffness matrix and flexural rigidities are estimated using the Hankel matrix with the candidate sizes. The validity of the proposed method is demonstrated through the numerical example of a five-story shear building model with and without damage.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.301-308
• /
• 2014

Despite Korea forest take 63.7% of the nation's territory, productivity of domestic structural lumber is low. Studies of domestic small lumbers need to be improved domestic structural timber productivity. In this study, small diameter lumber and finger joint small diameter lumber took bending test to calculate MOE and MOR. MOE of small diameter lumber was $9.3kN/mm^2$ and MOE of finger joint small diameter lumber was $15.4kN/mm^2$. Allowable standard bending stress of small diameter lumber and finger joint small diameter lumber was calculated according to ASTM D 2915. Standard allowable bending stress of small diameter lumber was $12N/mm^2$ and standard allowable bending stress of finger joint small diameter lumber was $11N/mm^2$. Standard allowable bending stress of finger joint small diameter lumber should be considered to design structural beam members.

• Korean Journal of Food Science and Technology
• /
• v.36 no.3
• /
• pp.410-415
• /
• 2004

Effects of ginkgo nut powder content on physical and sensory properties, and consumer acceptability of ginkgo nut gruel and cake were examined. In ginkgo nut gruel, greenness and consistency decreased, and sensory color intensity and ginkgo nut flavor increased with increasing ginkgo nut powder content. Consumer acceptability test indicated ginkgo nut powder : rice flour ratio at 4 : 6 had the highest overall and flavor acceptabilities. In ginkgo nut rice cakes, as ginkgo nut powder content increased, greenness, adhesiveness, sensory hardness, and cohesiveness of mass decreased, while sensory color intensity, ginkgo nut flavor, and chalkiness increased. Ginkgo nut cake with ginkgo nut powder : rice flour ratio at 16 : 84 had highest overall acceptability.

• 한국노년학
• /
• v.29 no.4
• /
• pp.1629-1644
• /
• 2009

This study was to examine the relationship between self-differentiation and mental health of elderly couples. This study also tries to investigate the effect of self-differentiation on mental health. Data were collected using self-administered questionnaire method with 271 elderly couples over 55 years old who lived in Chollabuk-Do province. The results showed that first, there was no significant difference in the level of total self-differentiation between husbands and wives. While the level of mental health(depression, somatization) were higher for wives than for husbands. Second, both husbands' and wives' mental health were negatively correlated with self-differentiation. Finally, results of multiple regression analyses showed that both husbands' and wives' mental health were negatively influenced by self-differentiation. Specifically, the variable significant affecting the husbands' mental health was the emotional reactivity of self-differentiation and the variable significant wives' mental health was the emotional cut-off of self-differentiation. These findings confirmed the concept of self-differentiation in applying to mental health of elderly couples.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.329-358
• /
• 2005

The Three storied Stone pagoda in Gameunsa Temple site, one of the early staged stone pagodas, has been known as a standard for Silla stone pagodas. A stone pagoda is not only a stone art work and but also a stone structure. Most studies and investigation of the stone pagoda has done mainly based on style and chronological research according to an art historical view. However, there is not an attempt to research the stone pagoda as a stone architecture. Most Korean experts at the stone pagoda has art history in their background. Engineers who can understand the structure of the stone pagoda are very limited. More architectural and engineering approach is need to research not only art historial understanding but also safety as a structure. We can find many technical know-how from our ancestors who made stone pagodas. 1. To reduce any deformation such as relaxation and sinking of BuJae which is caused by a heavy load, the BuJae (consist of a foundation stone and lower stereobates) should be enlarged. 2. A special construction method for connection between Myonsuk and Tangjoo was invented. This unique method is not used any longer after the Three storied Stone pagoda in Gameunsa Temple site. 3. The upper BuJae and the lower BuJae are missed each other by making a difference of Okgaesuk and Okgaebatchim in size. It is done for a distribution of perpendicular load and a prevention for relaxation of BuJae. 4. The center of gravity in the BuJae is located to the center of the stone pagoda by trimming the upper surface of the Okgaebatchim into a convex shape. The man who made stone pagodas had excellent knowledge on the engineering and techniques to understand the structure of the stone pagodas. We can confirm it as follows: the enlarged BuJae, dislocated connection between upper Bujae and lower BuJae, and moving the center of gravity close to the center of the stone pagoda.

• Journal of Korean Philosophical Society
• /
• v.117
• /
• pp.85-111
• /
• 2011

Topics with which chis paper deals are as following; (1)Zizek's interpretation of Rothko's painting, (2)Lacan's gaze and picture, (3)the real as object a, (4)primal jouissance and death-drive, (5)a new identity of man-emptiness in Zizek, (6) existential level and existential conflict, (7)a variety of meanings of emptiness, (8)transpecsonal drive and meditation, (9) the different Real-Emptiness, (10)Rochko's painting and transpersonal drive.

• Journal of Venture Innovation
• /
• v.5 no.4
• /
• pp.179-189
• /
• 2022

In the face of revolutionary changes in industry, the relationship between labor and income needs to be reconceptualized in the period of social revolution. The absolute decrease in labor due to the absence of labor is caused by automation, smartization, AI, robot labor, etc., which we must accept whether we want to or not. However, while gross social product and capital of the state or society increase, individual income is likely to decrease. During this transformation period, the state or politics must prepare for the problems caused by the decline in individual income. Until now, there have been various levels of discussion on social welfare or social security from the perspective of welfare or assistance. Attempts or studies at the experimental level have been conducted at the level of many countries or local governments and have found positive and negative effects. There is no basic income system that is widely implemented at the national level, and various discussions are taking place from a future-oriented perspective. Therefore, I propose to look at it from a new perspective based on the perspective so far. We explored that it is part of a positive approach to examine the importance and necessity of basic income in terms of working hours, quality of labor, income, quality of life, value of spare time, and work-life balance. The goal is to actively accept the absolute lack of working hours, replacement of mechanical labor, and polarization due to changes in the industry paradigm, and to look at the problems that come from a positive perspective. If we are going to accept it anyway, we should not look at these issues as short-sighted, but prepare them preemptively and establish a primitive plan from a long-term and overall perspective. Smartphones have changed the world over the past decade and have been lost, but wouldn't there be a lot of new discoveries? Shouldn't we think of it as a great opportunity to improve the quality of life through technological changes?

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.1 no.1
• /
• pp.21-32
• /
• 1981

Recent trends in design standards development in some European countries and U.S.A. have encouraged the use of probabilistic limit sate design concepts. Reliability based design criteria such as LSD, LRFD, PBLSD, adopted in those advanced countries have the potentials that they afford for symplifying the design process and placing it on a consistent reliability bases for various construction materials. A reliability based design criteria for RC flexural members are proposed in this study. Lind-Hasofer's invariant second-moment reliability theory is used in the derivation of an algorithmic reliability analysis method as well as an iterative determination of load and resistance factors. In addition, Cornell's Mean First-Order Second Moment Method is employed as a practical tool for the approximate reliability analysis and the derivation of design criteria. Uncertainty measures for flexural resistance and load effects are based on the Ellingwood's approach for the evaluation of uncertainties of loads and resistances. The implied relative safety levels of RC flexural members designed by the strength design provisions of the current standard code were evaluated using the second moment reliability analysis method proposed in this study. And then, resistance and load factors corresponding to the target reliability index(${\beta}=4$) which is considered to be appropriate level of reliability considering our practices are calculated by using the proposed methods. These reliability based factors were compared to those specified by our current ultimate strength design provisions. It was found that the reliability levels of flexural members designed by current code are not appropriate, and the code specified resistance and load factors were considerably different from the reliability based resistance and load factors proposed in this study.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.16-24
• /
• 2019

The corrosion amounts of steel structures can be different depending on their installation condition and height. Thus, their corrosion maintenance should be considered depending on installation conditions of local structural members. In this study, an atmospheric exposure test was conducted to evaluate the corrosion amount and the corrosion rate depending on the installation condition and height of a steel water gate using monitoring steel plates and corrosion environment measuring sensors. The mean corrosion depth was evaluated using the weight loss method and the galvanic corrosion current was measured by corrosion environment measuring sensors. Local corrosion rate of local structural member in steel water gate was estimated using measured mean corrosion depths and galvanic corrosion currents. From this measurement results, the corrosion damage in horizontal member of the cross beam was highly evaluated than those of other structural member as skin plate, etc. The relative difference in the corrosion rate of a local structural member could be highly affected by local corrosion environments of steel water gate members. Therefore, an appropriate maintenance method should be considered for local corrosion damages of local structural members determined by local corrosion environments of a steel water gate.