• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.37-37
• /
• 2011

최근 세계적인 지진의 발생과 함께 구조물의 내진성능 평가 및 증진 방법에 대하여 많은 연구가 진행 되고 있다. 특히 교량 구조물의 교각의 경우에는 상부구조의 고정하중 및 활하중을 지반에 전달하여 주는 역할을 하기 때문에, 역으로 지진이 발생하였을 경우 교각의 내진성능에 따라서 교량의 안전도에 많은 영향을 미칠 수 있다. 또한 산악지역이 국토의 70%이상을 차지하는 우리나라의 지형적인 특성상 고교각을 이용한 장대교량의 건설이 필요하며 도시지역의 교통량 증가로 인한 도시고속도로의 건설 등 고가교의 필요성이 점차 증가하고 있다. 그러나 CFT(Concrete Filled Tube)부재의 경우에는 콘크리트가 3축 구속 상태로 존재하지만 자중이 크며 내진 성능이 떨어지는 단점을 가지고 있다. 이러한 단점을 보완하기 위하여 CFT부재의 단면을 중공으로 만듦으로써 부재를 경량화하고 내부 튜브를 삽입하여 내부를 구속 시킨 내부 구속 중공 CFT 부재(Internally Confined Hollow CFT Member, ICH CFT)가 개발되었다. 이는 콘크리트가 내 외부 튜브에 의하여 구속되어 3축 구속 상태로 존재함으로써 콘크리트 중공부로의 취성파괴를 방지하여 연성도 및 강도를 향상시켜주며, 단면의 감소로 인해 재료비를 절감 할 뿐 아니라 자중 감소로 인해 내진 설계에도 유리하다. 현재 내부 구속 중공 CFT 부재에 대한 연구가 많이 진행되고 있지만, 튜브를 삽입함으로써 부재의 중공부로 발생하는 구속력의 특성을 해석적으로 정립한 연구는 미비한 실정이다. 본 연구에서는 압축을 받는 중공 CFT 부재에 내부 튜브를 삽입함으로써 발생하는 콘크리트의 구속력을 해석적 연구를 통하여 수행하였으며, 구속력을 파악하기 위한 평가 방법으로는 구속 콘크리트의 중공비와 직경, 외부튜브의 두께, 내부튜브의 두께 등으로 평가하였다. 해석적 연구 결과, 내부 튜브를 삽입함으로써 발생되는 외부 구속력은 이론적 수식에 의한 구속 응력값과 비슷한 값을 가지지만 내부로 발생하는 구속력은 이론적 수식에 의한 구속 응력값에 도달하지 못하는 것을 확인할 수 있었다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.73-76
• /
• 2008

According to the survey of earthquake disaster, low-rise reinforced concrete building larger by the extent of damage and because of the underlying distribution of reinforced concrete structures more, it is very likely to be disasters. The purpose of this study is to discuss how strength and stiffness of each system in low-rise reinforced concrete buildings consisted of extremely brittle, shear and flexural failure lateral-load resisting systems have influence on seismic capacities of the overall system. Generally, if shear failure members including extremely brittle failure members are failed during an earthquake, the lateral-load resisting seismic capacities of RC buildings are lower rapidly, and if the seismic capacities of shear failure members were higher than that of flexural failure members, failures of shear failure members have influence on failures of the overall system. The result of this paper will provide pseudo-dynamic test of carried out to estimate the possibility of proposals.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.4
• /
• pp.27-39
• /
• 1989

The partially prestressed concrete members have intermediate degree of prestressing between the reinforced and fully prestressed concrete members. Partially prestressed concrete members take advantages of both the merits of fully prestressed concrete members under the service load state and those of reinforced concrete members under the ultimate load state. Total 12 partially prestressed concrete T-beams were m4de and tested to find the effects of prestressing ratio, stirrup arrangement and shape of cross section on the flexural and shear behavior of the partially prestressed concrete beams. In this paper, the test procedure and the ultimate behavior of test beams are described. The validity of prestressing indices is checked by analyzing test results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.5
• /
• pp.1023-1031
• /
• 1994

The closed forms of consistent mass matrix with rotational inertia matrix are developed for free vibration analysis in space sutructures containing linearly tapered members with cross section of thin-walled I-sections. The exact displacement functions are used for formulating mass matrices. The very small slopes of the tapered member are used in usual practice, such that the series expansion forms of these are also developed to avoid numerical failure in vibration analysis. Significant improvements of accuracy and efficiency of free vibation analysis are achieved by using the mass matrices developed in this study. Frequencies of free vibation of tapered members are compared with solutions based upon stepped representation of beam element in the ANSYS. The mass matrices presented in this study can be used for the free vibration analysis of tapered and prismatic members.

• Composites Research
• /
• v.29 no.6
• /
• pp.328-335
• /
• 2016

The purpose of this study is to develop fiber reinforced cement matrix composite (ECC) produced with limestone powder in order to achieve high ductility of the composite, and to evaluate flexural performance of structural members made with ECC. Four kinds of mixture proportions were determined on the basis of the micromechanics and a steady state cracking theory considering the matrix fracture toughness and fiber-matrix interfacial characteristics. The mechanical properties of ECC, represented by strain-hardening behavior in uniaxial tension, were investigated. Also, strength property of the composite was experimentally evaluated. Two structural members made with ECC were produced and tested. Test results were compared with those of conventional concrete structural members. Increased limestone powder contents of ECC provides higher ductility of the composites while generally resulting in a lower strength property. ECC structural members exhibited higher flexural ductility, higher flexural load-carrying capacity and tighter crack width compared to conventional structural members.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.7
• /
• pp.383-389
• /
• 2011

In this paper, we propose a improved speech absence probability estimation algorithm by applying environmental noise classification for speech enhancement. The previous speech absence probability required to seek a priori probability of speech absence was derived by applying microphone input signal and the noise signal based on the estimated value of a posteriori SNR threshold. In this paper, the proposed algorithm estimates the speech absence probability using noise classification algorithm which is based on Gaussian mixture model in order to apply the optimal parameter each noise types, unlike the conventional fixed threshold and smoothing parameter. Performance of the proposed enhancement algorithm is evaluated by ITU-T P.862 PESQ (perceptual evaluation of speech quality) and composite measure under various noise environments. It is verified that the proposed algorithm yields better results compared to the conventional speech absence probability estimation algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.540-543
• /
• 2013

선박은 판과 보강재를 효율적으로 조립한 매우 복잡한 구조물이고, 이동하는 구조물로써는 최대규모의 구조물이다. 특히, 선체 구조의 설계란 "예상되는 모든 하중에 충분히 견딜 수 있는 강도(strength)와 강성(stiffness)을 가진 부재의 크기를 결정하고 적절히 배치하는 과정이다." 라고 말할 수 있다. 선체 구조의 설계는 부재의 배치가 얼마나 적절하게 잘되어 있는가에 달려 있다고 하여도 과언이 아닐 정도로 매우 중요하다. 주요 구조 부재의 부재 배치에 대한 기본적인 개념은 판 부재의 용접선(seam line), 종, 횡늑골의 간격, 종거어더 등을 예로 들 수 있으며, 부재의 배치는 최적 설계 및 공작상의 관점으로부터 선정되어야 하며, 또한 선체 전체의 구조적인 연결이 불연속이 되지 않도록 하여야 한다. 특히, 판 부재의 용접선은 여러 가지 표준치수로 생산되는 판 들 중, 판의 기준 폭이 얼마인 것을 사용하는 것이 공작상 또는 배치상 가장 편리한 가를 생각하여야 한다. 이것은 선박의 크기에 따라 다르겠지만, 조선소 크레인의 용량 및 가공상, 강도상의 문제를 고려하여 가능한 한용접선의 수를 줄이는 것이 바람직하다. 용접선을 줄이기 위해서는 판 부재의 폭을 넓게 하면 되나, 철강회사에서 표준으로 생산 판매하는 주판의 폭보다 넓은 판을 주문 구입 한다는 것은 곧 생산비용의 증가로 이어지는 것으로 이는 주판 구입 경비 측면에서는 바람직하지 않다. 따라 서, 주판 구입경비의 최소화를 유도하면서도 주판 폭의 적정 및 용접선 개수 최소화를 유지할 수 있도록 설계하는 것은 중요하지만, 용접선 배치의 문제는 다양한 입력 변수를 고려해야 하는 복잡한 문제이기 때문에 그간 최적화 관점에서 접근하지 못하고 시니어급 엔지니어가 가진 경험과 조선소의 지침서에 기재된 절차에 따라 대략적인 해를 결정하여 왔다. 본 연구는 이러한 복잡한 문제를 최적화 방법인 당금질(Simulated Annealing) 방법을 이용하여 해결한 결과를 소개하며, 그 결과와 효용성에 대해 논하도록 하겠다.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.3
• /
• pp.11-21
• /
• 2011

The most critical issue in free-form buildings is how to construct the free-formed exterior facade panels. Their geometric complexity delivers many cons and problems in fabricating and constructing their shapes. To construct a free-form building, first of all, its skin has to be chopped into small pieces, which is called panelization. After panelization, the panels go through an optimization process to construct them economically. The panel's geometries are modified or regenerated through this optimization process. In this study, the panel optimization process of free-form buildings are performed through a case study. The panel shapes of the case study are modeled with Digital Project. To test the constructability of the various panels, 8 mock-up panels are made and laser scanning technology is applied to measure the preciseness of the panels manufactured in comparison with their original design.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.1
• /
• pp.43-52
• /
• 2007

There is a growing range of applications for concrete-filled steel tube (CFT) member because of its superior performance. But a CFT member may be uneconomical or has weight problems because it is fully filled with concrete. In this study, a new type of member, called internally confined hollow (ICH) CFT member, was developed to solve the high cost and weight problems of the CFT member. To determine stress-strain model of the concrete in an ICH CFT column, possible failure modes of an ICH CFT column were suggested and confining pressure was derived from equilibriums for each failure mode. From the derived equations, a computer program was coded and parametric studies were performed for some examples. Analytical results showed that internally confined concrete has enhanced strength and ductility compared with those of unconfined or biaxially confined concrete.

• Korean Journal of Food Science and Technology
• /
• v.41 no.2
• /
• pp.162-166
• /
• 2009

In an effort to determine the effect of ingredients on the sensory characteristics of dongchimi, 10 different samples of dongchimi were prepared in various combinations of 4 ingredients most notably red pepper, garlic, ginger, and green onion and their physicochemical, microbiological, and sensory characteristics were assessed. Each ingredient utilized for the preparation of dongchimi did not affect changes in pH and titratable acidity, but exerted significant effects on sensory scores of overall acceptability, acid odor, salty, and hot taste. In cluster analysis using the 'Ward' method, dongchimi samples were classified into three groups. The first group was the samples prepared with a variety of ingredients including garlic, and the second group included samples prepared with the sole ingredient, except for red pepper. The third group had features similar to those of the sample prepared without other ingredients. It was determined that garlic played a crucial role in the sensory properties of dongchimi, and the addition of various ingredients enhanced hot taste and reduced acid odor, sourness, moldy odor, and carbonated taste by their interaction.