• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4A
• /
• pp.323-329
• /
• 2011

Most current design codes of concrete structures adopt the partial safety factor format to assure the proper safety margin or reliability against various limit states as a practical design tool. The safety factors, load and resistance factors and so on, are determined based on the theory of structural reliability, which takes into account the statistical uncertainties of both loads and resistances. The establishment of statistical models for load and resistance should be preceded the application of reliability theory. In this paper, especially the influence of the statistical variations of resistance models, which are described in terms of strength of concrete, strength of reinforcements and sectional dimensions and so on, are examined and the probabilistic models for resistance of reinforced concrete members were developed. The statistical data were collected on local tests and experiments in Korea and the Monte Carlo simulation (MCS) technique was used. The results of this paper may be useful and valuable in calibration of design code in this country.

• Explosives and Blasting
• /
• v.25 no.1
• /
• pp.53-65
• /
• 2007

When doing a blasting demolition on RC structures made of scale models, scale model members considering both a proper scale factor and mechanical characteristics of materials have to be similar to prototype RC members to analyze the collapse behavior of RC structures. In this study. a similitude law considering the density of prototype materials is calculated. Both mix of concrete and arrangement of reinforcement have been described referring to Concrete Standard Specification as well as Design Standard of Concrete Structure. The scale factor on scaled concrete models considering maximum size of coarse aggregate is about one-fifth of a cross section of prototype concrete members. A scale factor on staled steel bar models is about one-fifth of a nominal diameter of prototype steel bar. According to the mechanical test results of scale models, it can be concluded that the modified similitude law may be similar to compressive strength of prototype concrete and yield strength of prototype steel bar.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.541-544
• /
• 2008

Recently, due to the increase of high-rise buildings construction, many researches for making harden of concrete earlier and remove of forms faster are being performed to reduce construction period. The purpose of this study is to analysis which mixing condition and curing temperature of early strength concrete. Porperties of concrete by the different factors, such as the type of active admixtures, mineral admixtures, curing temperature, the amount of binder, etc. Through the test of concrete using the different type of admixture, PC type was more excellent than PNS type admixture. The concrete Strength remarkably will be able to confirm that decreases from temperature below 12$^{\circ}C$.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.2
• /
• pp.65-74
• /
• 2015

In order to design an advanced composite materials drainage pipe structures for an undersea tunnel, mechanical properties for the lamina types of the structural member must be predetermined. It is also reported that the size effect of the specimen is significant. In this study the tensile tests for the lamina types of the structural member are conducted at the room temperature ($20^{\circ}C$) and the seawater temperature ($0^{\circ}C$). In addition, the mechanical properties are predicted by theory based on the rule of mixtures and elasticity solution technique. The predicted mechanical properties are compared with test results obtained by a test method. In the design of an advanced composite materials drainage pipe structural members for an undersea tunnel, the used mechanical properties must be applied at the room temperature with considering the modified factors. These are to be offered the datum for the design an advanced composite materials drainage pipe structures for an undersea tunnel.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.6
• /
• pp.543-549
• /
• 2014

The deflection of reinforced concrete members can be highly variable, due to uncertainties in the characteristics of the concrete. However, current standards do not take this problem into account, instead recommending only the minimum thickness and maximum allowable deflections based on empirical data. This paper is aimed at evaluation deflection variabilities by applying a probabilistic analysis model to a finite element analysis model. To evaluate the variabilities of deflections, a Monte Carlo simulation, which incorporated the eight parameters related to concrete, reinforcement, member size, and tension stiffening. The results showed that lager spans were more sensitive to the deflection due to loads and that as the applied live loads were increases and the slab thickness were decreased, the deflection variability increased.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.319-319
• /
• 2016

최근 급격한 기후변화와 도시화로 인하여 강우량 및 강우강도는 약 20% 증가하고 강우일수는 14% 감소하며 도시 기온이 최대 $3^{\circ}C$까지 증가하는 등의 현실적인 문제가 발생하고 있다. 이로 인한 도시 물순환체계의 파괴는 도시물관리 여건의 악화로 이어지고 특히 불투수면적 증가로 인한 도시 홍수 및 침수의 증가, 잦은 도시 고온 현상, 도시하천의 건천화로 수질 악화를 야기하는 실정이다. 이에 국토의 자연자원을 보전하고 기후변화에 적응하면서 도시의 안전도와 가치를 높이기 위한 물관리 정책은 먼저 물을 순환을 보다 적극적으로 반영하고 통합적인 물관리 체계 확보를 요구한다. 이를 위해서는 발생원 관리를 포함한 소규모 분산관리 체계로 변화하여야 하며 이들 시설에 대한 네트워크화를 통해 기후변화에 강건하고 통합관리쳬계를 구축하는 것이 중요하다. 이를 위해서는 저영향개발(LID, Low Impact Development) 및 그린인프라(GI, Green Infrastructure) 기반의 분산식 빗물관리기법의 도입이 절실하다. 현재 국내에서는 제도적으로 기후변화 대비, 지속가능한 도시환경 구축을 위한 물순환 건전화를 위해 100대 국정화제에 포함시키는 등(2013.2) 도시계획 및 기반시설 설치 LID기법의 법제적 산업적 도입을 추진중에 있으나, LID 기술의 수자원 치수, 이수 및 환경 효율성에 대한 객관적인 정보의 부재, LID 기술에 대한 효율성 검증 및 인증시스템의 부재, LID 기술의 무분별한 국외기술 도입으로 인한 효과 저감, LID 기술의 설계, 시공, 관리를 위한 매뉴얼 및 가이드라인의 부재, LID 기술에 대한 지자체 지원 및 전문가 양성 시스템의 부재 등 복합적인 문제를 안고 있어 GI 및 LID 기술의 적용을 통한 새로운 도시 및 유역차원의 수자원확보와 재해경감기술 패러다임 확보가 용이하지 않다. 이를 위해 본 연구에서는 강우유출수 관리를 위한 LID기술 신뢰도 향상 및 단일화, 표준화된 효율성 검증 기술 개발과 더 나아가서 도시-건축-수자원-도로-조경 등의 종합적인 인프라를 바탕으로 LID기술 통합관리 및 기술 고도화를 위해 부산대학교 GI LID 물순환 실증단지의 계획 및 구축을 수행하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.2
• /
• pp.111-118
• /
• 1996

Ship structure basically consists of plate members and it's overall strength depends an the stiffness and strength of each plate member. The buckling strength of plate is one of the most important design criteria when we investigate the structural intergraty. Therefore, it is necessary to surly reasonable buckling formula in order to carry out a more efficient and reliable design. In the present study, the buckling design formula of plate panels under combined loads(inplane compression, tension and shear) is obtained on the theoretical solution or reference paper. This formula is compared with the existing theoretical solution, other author's formula[1], design codes of LR and results which are obtained by numerical analysis. It has a good correlation with numerical analysis results or theoretical ones. When we evaluate buckling strength of plate panels, this formula can be presented with reasonable accuracy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.517-529
• /
• 2020

Various facilities in the river working in a complex interdependence network result in both desired and adverse effects. Among these, the weir crossing the river continuously acts in various ways, such as securing river maintenance flow and water level during dry-period, and rising flood level during rainy period. Until now, weir planning was only limited to flood mitigation management. Recently, the demand for securing river environment functions is increasing. Therefore, the necessity for an environmental flow has emerged. Nevertheless, there is no analysis and evaluation of the ecological functional aspects applying the environmental flow when planning facilities. Therefore, this study aimed to develop and systematize an assessment method that considers not only flood control but also river environment. Environmental flow was applied to the weir named Dondaet-bo and hydraulic analysis was conducted for each retention, demolition, and re-installation case. Also, this research was conducted to minimize the impact on the surrounding river facilities and flood assessments from previous perspectives were performed. The study result demonstrated a plan to reinstall the weir as a natural riffle. Through this study, it is expected that the flood control and environmental functions of rivers can be secured in combination.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1335-1343
• /
• 2012

In this study, the lightweight modular design of hybrid railway carbody structures made of sandwich composites and aluminum extrusions was investigated by using topology and size optimization techniques. The topology optimum design was used to select the best material for parts of the carbody structure at the initial design stage, and then, the size optimum design was used to find the optimal design parameters of hybrid carbody structures using first-order and sub-problem methods. Through the topology optimization analysis, it was found that aluminum extrusions were suitable for primary members such as the underframe and lower side panel module to improve the stiffness and manufacturability of the carbody structures, and sandwich composites were appropriate for secondary members such as the roof and middle side panel module to minimize its weight. Furthermore, the results obtained by size optimization analysis showed that the weight of hybrid carbody structures composed of aluminum extrusions and sandwich composites could be reduced by a maximum of approximately 17.7% in comparison with carbody structures made of only sandwich composites.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2831-2836
• /
• 2009

If a design load exceeding the frictional force of the contact surface is applied to the connection of steel members using a high-tension bolt friction joint, sliding occurs and the connection of the steel members bears the design load through the shear strength and bearing strength of the bolt and the base plate. The sliding distance can be determined by the tensile force of the bolt, the friction coefficient of the contact surface, and the position of the bolt in the base plate hole. This study measured and analyzed sliding according to standard bolt hole and oversize bolt hole when pure bending moment and tensile force were applied to high-tension bolt joints with different sizes of bolt holes made in the base plate and the cover plate. In a high-tension bolt joint receiving pure bending moment and tensile force, the load causing sliding in an oversize bolt hole was $74\sim94%$ of that in a standard bolt hole. In a member receiving tensile force, the sliding load ratio was lower when the size of oversize bolt holes in the base plate and the cover plate was large. In addition, the size of the oversize bolt hole in the base plate was more closely correlated with the change of sliding loadthan the size of the oversize bolt hole in the base plate.