• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.4
• /
• pp.27-39
• /
• 1989

The partially prestressed concrete members have intermediate degree of prestressing between the reinforced and fully prestressed concrete members. Partially prestressed concrete members take advantages of both the merits of fully prestressed concrete members under the service load state and those of reinforced concrete members under the ultimate load state. Total 12 partially prestressed concrete T-beams were m4de and tested to find the effects of prestressing ratio, stirrup arrangement and shape of cross section on the flexural and shear behavior of the partially prestressed concrete beams. In this paper, the test procedure and the ultimate behavior of test beams are described. The validity of prestressing indices is checked by analyzing test results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.4
• /
• pp.191-198
• /
• 1999

수많은 판형부재로 구성된 대형 트러스교에서는 불량용접된 부재가 존재할 수 있으며, 이는 교량의 피로수명에 결정적인 영향을 줄 수 있다. 이러한 교량에서 용접불량부를 조사하고 부재단면중 용접불량을 고려한 유효단면을 가정하여 피로수명을 예측하는 방법에 대하여 연구하였다. 이를 위하여 피로수명에 영향을 미치는 교통량을 분석하고 차량모델을 가정하여 유효등가응력을 산정하였으며 모형피로시험에서 구한 응력-반복횟수곡선을 이용하여 피로수명을 예측하였다. 본 연구에서 사용된 분석기법은 불량용접부와 교통량이 강교량의 피로수명에 미치는 영향을 예측하는데 매우 유용함을 알 수 있다.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.149-156
• /
• 1992

An efficient preprocessor is developed for the finite element structural analysis of a ship's hull module. A hull module structure is divided into three groups for easy data handling : longitudinal members, transverse members, and transverse bulkheads. Based on the classification rules and design practices at shipyards, the preprocessor can create finite element nodes, elements, boundary conditions, and loadings automatically. By connecting the preprocessor with the ANSYS program, we can obtain the results of ship structureal analysis more efficiently. Applied to a typical double-hull oil tanker, the present preprocessor shows various advantages over conventional general-purpose preprocessors.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.60-67
• /
• 2020

Recently, many studies have been conducted on the structural behavior of HPFRCC, but most of the studies focused on the flexural behavior while studies on the shear behavior are limited. In this study, a model has been developed to reasonably predict the shear strength of a HPFRCC beam without stirrups. To develop the model, a HPFRCC beam was simply idealized with upper & lower chords resisting bending moment and a web shear element resisting shear forces. Then, taking into the account of the tensile behavior of HPFRCC, the main diagonal compressive strut angle and shear stress of the web shear element were evaluated on shear failure. Then, the shear strength of the HPFRCC beam could be evaluated. For the verification of the proposed model, the predictions by the proposed model were compared with the test results of 48 HPFRCC beams exhibiting shear failure. The results showed that the proposed model reasonably predicted the actual shear strength with an average of 1.045 and CoV of 0.125. This study are expected to be useful for related researches and design of members or structures to which HPFRCC is applied.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.1
• /
• pp.15-22
• /
• 2011

Pultruded fiber reinforced polymeric plastic (PFRP) structural members may be one of attractive alternatives of the structural members in the civil engineering applications because of its many advantageous mechanical properties. However, they have relatively low modulus of elasticity and also cross-sections of structural shapes are composed of thin plate components such as flange and web. Therefore, structural stability is an important issue in the design of pultruded structural compression members. For the design of pultruded structural member under compression, buckling and post-buckling strengths of plate components may be taken into account. In the structural steel design following AISC/LRFD, in addition to the buckling strength, the nonuniform stress distribution in the section is incorporated with a form factor. In this paper, the form factor for the design of PFRP structural member under compression is investigated through the analytical study. Furthermore, the process for the determination of the form factor is suggested.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.92-92
• /
• 2011

최근 건설기술의 발전과 함께 강재 케이블을 이용하는 시설물의 시공이 점점 증가하는 추세이다. 특히 현수교, 사장교와 같은 초장대 교량에 사용되는 케이블은 주거더 및 상판에 의한 하중의 대부분을 지지하는 핵심부재이다. 하지만 이러한 케이블 부재는 부식, 파단 등으로 인한 단면손실이 발생할 수 있고, 이로 인한 손상부의 응력집중으로 인해 시설물 전체의 붕괴로 이어질 수 있는 위험성을 가진다. 따라서 조기에 단면손실을 찾아 사고를 미연에 방지할 수 있는 강재 케이블 비파괴 검사 기술기반의 건전성 모니터링이 필수적이다. 이러한 효율적인 건전성 모니터링을 위해 스마트 센서를 활용한 연구가 활발히 이루어지고 있는데, 그중 대표적인 스마트 센서중 하나인 마그네틱 센서는 높은 신뢰도와 어디에나 적용 가능한 재현성 때문에 구조물 건전성 평가에 적용하기 유용한 기술로 그 적용범위가 선박, 항공등으로 점점 넓어지고 있는 추세이다. 마그네틱 센서는 그 적용대상에 따라 다양한 마그네틱 특성을 활용할 수 있는데, 최근에는 투자율 계측을 통해 케이블의 장력 측정이 가능한 Elasto-Magnetic 센서(E/M 센서)가 개발되었고 그 활용성에 대한 연구가 이뤄지고 있다. 이에 본 연구에서는 E/M 센서를 이용한 강재 케이블 모니터링 기술을 제안하고자 한다. E/M 센서는 본래 케이블의 장력측정을 위해 개발되었지만 본 연구에서는 강재 케이블 부재의 단면손실 검색을 위해 적용하였다. 제안된 기술의 실험적 검증을 위해 E/M 센서를 이용하여 4가지의 다른 직경을 가지는 강봉시편을 E/M 센서헤드의 1차 코일을 통해 자화시키고, 각각의 직경에서 출력전압을 2차 코일을 이용하여 계측하였다. 그 결과 강봉의 직경이 감소함에 따라 출력 전압이 감소함을 보였다. 반복실험을 통해 해상도 및 선형성이 확보되는 최적의 입력전압과 출력전압의 워킹포인트를 선정하였고, 선정된 조건에서 강봉시편을 일정 간격으로 스캔한 결과 단면감소에 따른 선형적인 출력전압 감소와 동시에 단면 변화 지점에서는 추세선에서 크게 벗어난 출력전압 계측값을 나타내었다. 본 실험을 통해 제안된 E/M 센서를 이용한 강재 케이블 모니터링 기술의 유용성 및 적용가능성을 확인할 수 있었다.

• Proceedings of the Korean Society for Information Management Conference
• /
• 2005.08a
• /
• pp.321-326
• /
• 2005

연구 개발자들은 자신의 정보활동에 있어 전체 활동의 20 ${\sim}$ 40%를 관련 정보의 탐색 및 분석에 사용하고 정보활동 결과는 개인 컴퓨터에 저장한다. 그러나 개인 컴퓨터상의 유용한 정보는 정보관리 및 공유 도구의 부재로 인하여 가치 및 유용성을 상실하고 있다. 본 연구에서는 데스크 탑 서치와 P2P 기반의 정보공유 기능을 갖는 시스템을 제안한다. 데스크 탑 서치를 통하여 연구 개발자는 본인의 컴퓨터에 저장된 정보를 효율적으로 활용할 수 있다. 연구 개발자들이 많은 시간을 들여 축적한 유용한 정보자원을 쉽게 공유할 수 있게 하는 P2P 기반의 정보공유는 연구개발 활동의 전체적인 생산성을 높일 수 있다.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.293-302
• /
• 2004

The transfer of prestress force in pretensioned prestressed concrete (PSC) members is of great concern because it affects directly the distribution of stress around the transfer zone. The design provision of current design code on the transfer length considers only the prestress intensity and the diameter of prestressing steels. However, other factors such as concrete compressive strength and concrete cover may affect greatly the transfer length. The purpose of the present paper is to explore the various factors that affect the transfer length in pretensioned PSC members. The bond stress-slip relation between prestressing steel and concrete was modeled first from experimental data and then this model was incorporated into the interface element. The interface element was used to perform the finite element analysis for pretensioned PSC members. The results indicate that the compressive strength and concrete cover are also very important parameters which affect the transfer length greatly. This means that the current design code, which considers only the effective prestress and diameter of prestressing steel, must be improved to take into account the other important variables of compressive strength and concrete cover. The present study allows more realistic analysis and design of pretensioned PSC members.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.2
• /
• pp.83-93
• /
• 1998

The twin aims of the present study are to develop a PC program for the statistical analysis of the measured cohesion data and to suggest a probabilistic corrosion rate estimation model for longitudinal members of tanker structures. A data analysis for the corrosion rate statistics(i.e., mean, standard deviation) as a function of the corrosion parameters is established for various structural member categories/locations of interest. Development of the computer program is focused on possible operation together with future addition of more corrosion data as they become available. To investigate the influence of the corrosion protection scheme a series of the corrosion analysis varying the life of coating are carried out and several different corrosion models as a function of time are suggested depending on the coating life.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.5
• /
• pp.1013-1021
• /
• 1994

The stiffness and mass matrices are developed for free torsional vibration analysis in linearly tapered thin-walled I-beams that takes into account the effect of warping torsion. The approximate shape functions are used for formulating stiffness and mass matrices. Significant improvements of accuracy and efficiency of free vibration analysis are achieved by using the stiffness and mass matrices developed in this study. Frequencies of free vibration of tapered members are compared with solutions based upon stepped representation of beam element and also are verified with model tests. The stiffness and mass matrices presented in this study can be used for the free vibration analysis of tapered and prismatic thin walled I-beams and space structures involving warping torsion.