• Journal of Nutrition and Health
• /
• v.42 no.8
• /
• pp.770-783
• /
• 2009

The school foodservice was quantitatively extended by policy of government all the while. There was carried out the survey of customer satisfaction about school foodservice by the ministry of education, science, and technology since 2006 years. Therefore, the purpose of this study was to grasp an improvement of the scores of school foodservice' quality attributes and satisfaction as compared with the preceding year by respondents and school type (elementary school, middle school, and high school). An annual survey was practiced to respondents (students, parents, and faculty) on september 2007 years and 2008 years in 16 cities and provinces. The statistics was analyzed to descriptive analysis and t-test for SPSS 12.0. The scores of school foodservice' quality attributes and overall customer satisfaction were almost increased to students, parents, and faculty and especially, big elevation in middle school. There was big increased the quality attributes such as 'providing information on foodservice', 'pleasant foodservice environment', 'kindness offered by employee' in elementary school, middle school, and high school to total respondents. An overall satisfaction in school foodservice was improved from 69.2 score to 71.9 score. On students, scores of overall satisfaction was increased from 72.9 to 74.0 as students of elementary school and from 61.5 to 65.8 as students of middle school (p < .001). Therefore, for improvement and development of school foodservice, there should be a necessary for an operator of school foodservice and an office of education to make an effort.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.2
• /
• pp.21-28
• /
• 1973

This report is prepared to promote cocoon natures for the use of silk reeling material. It is easily understandable that there must be disuniformity composed with superior group and inferior group in commercial silkworms. If such different groups be seperated by some method, it would be a great contribution for the cocoon production. For a comparative purpose, silkworm sex seperation carried out because male silkworms produce more silk than female worms. The author has developed a new chemical reagent available for the seperation of superior group and inferior group from commercial silkworms, which he has named it as Better Hybrid Controller (BHC). The obtained comparative results are summarized as followings. 1. Basic investigation of BHC application a) In case BHC applied with hybrid worms and pure line, the former one starts to adapt mulberry leaves earlyer than pure line variety. b) The mulberry adapting interval distribution of pure line worms after BHC application showed U type distribution, but hybrid worms showed L type or Poisson's distribution. c) In case of BHC application with silkworms, the longer period application is, the duller distribution was formed. d) When silkworms are seperated in two groups by use of BHC application, the earlyer mulberry adapted group is seemed as stronger than the other part and the group ratio is 2 : 1. 2. Comparation between sex seperation result and better hydrid control (BHC) seperation result. a) The cocoon shell per cent of male worm group showed betweer result than the female group but only 0.4% difference between sexes. b) The cocoon shell per cent of superior group, seperated by BHC, showed 0.7% more than the inferior group. c) The average cocoon shell per cent of BHC treated cocoons showed much more than the Control group as 1.6∼2.4% increase. Enven the inferior group showed better result than the Control. d) Such unexpected result is considered to be the result that BHC application is activating some thing with silkworm physiology. e) On the ether hand, the result of sexes seperated groups or male worm group did not show desirable conclusion as far as cocoon shell per cent is concerned. f) However, when the male group was reeled as silk, it showed much better silk yield or silk per cent of cocoon than the female group as much as one per cent difference between by sexes. Such result was brought by superior silk yield from cocoon shell as much as 87.4%. g) On the other hand, the male group showed lowest non breaking reelable ratio (63%) among all group comparation. h) When we compare cocoon qualities by sex seperation and BHC seperation against the Control, there is no qualitative change, but BHC group showed quantitative promotion with cocoon bave length as much as about hundred meters. i) In case of calculation for productive income of cocoon production, BHC applied group showed about ten per cent income promotion more than the Control. The sexes seperated group, however, showed rather negative result because the male cocoon produced poor weight per box eggs which could not cover it by the inclose of silk yield of it. j) So, the BHC application with the fetched worm stage brought about big promotion for cocoon production. k) BHC method may be used either for seperation purpose or quantitative promotion with whole silk-worms. 3. Only male silkworms rearing did not show desirable productivity, so there is no reason to work out it in the fetching stage of worm.

• Radiation Oncology Journal
• /
• v.23 no.3
• /
• pp.186-193
• /
• 2005

Purpose: To improve the management of a medical linear accelerator, the records of operational failures of a Varian CL2l00C over a ten year period were retrospectively analyzed. Materials and Methods: The failures were classified according to the involved functional subunits, with each class rated Into one of three levels depending on the operational conditions. The relationships between the failure rate and working ratio and between the failure rate and outside temperature were investigated. In addition, the average life time of the main part and the operating efficiency over the last 4 years were analyzed. Results: Among the recorded failures (total 587 failures), the most frequent failure was observed in the parts related with the collimation system, including the monitor chamber, which accounted for $20\%$ of all failures. With regard to the operational conditions, 2nd level of failures, which temporally interrupted treatments, were the most frequent. Third level of failures, which interrupted treatment for more than several hours, were mostly caused by the accelerating subunit. The number of failures was increased with number of treatments and operating time. The average life-times of the Klystron and Thyratron became shorter as the working ratio increased, and were 42 and $83\%$ of the expected values, respectively. The operating efficiency was maintained at $95\%$ or higher, but this value slightly decreased. There was no significant correlation between the number of failures and the outside temperature. Conclusion: The maintenance of detailed equipment problems and failures records over a long period of time can provide good knowledge of equipment function as well as the capability of predicting future failure. Wore rigorous equipment maintenance Is required for old medical linear accelerators for the advanced avoidance of serious failure and to improve the qualify of patient treatment.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.2
• /
• pp.188-198
• /
• 2010

This study attempts to examine the influence that negative WOM (NWOM) has in an online context. It specifically focuses on the impact of the service failure description and the perceived intention of the communication provider on consumer evaluations of firm competence, attitude toward the firm, positive word of mouth and behavioral intentions. Studies of communication persuasiveness focus on "who says what; to whom; in which channel; with what effect (Chiu 2007)." In this research study, we examine electronic web posting, particularly focusing on two aspects of "what": the level of service failure communicated and perceived intention of the individual posting. It stands to reason electronic NWOM that appears to be trying to damage a product’s or firm's reputation will be viewed as more biased and will thus be considered as less credible. According to attribution theory, people search for the causes of events especially those that are negative and unexpected (Weiner 2006). Hennig-Thurau and Walsh (2003) state "since the reader has only limited knowledge and trust of the author of an online articulation the quality of the contribution could be expected to serve as a potent moderator of the articulation-behavior relationship. We therefore posit the following hypotheses: H1. Subjects exposed to electronic NWOM describing a high level of service failure will provide lower scores on measures of (a) firm competence, (b) attitude toward the firm, (c) positive word of mouth, and (d) behavioral intention than will subjects exposed to electronic NWOM describing a low level of service failure. H2. Subjects exposed to electronic NWOM with a warning intent will provide lower scores on measures of (a) firm competence, (b) attitude toward the firm, (c) positive word of mouth, and (d) behavioral intention than will subjects exposed to electronic NWOM with a vengeful intent. H3. Level of service failure in electronic NWOM will interact with the perceived intention of the electronic NWOM, such that there will be a decrease in mean response on measures of (a) firm competence, (b) attitude toward the firm, (c) positive word of mouth, and (d) behavioral intention from electronic NWOM with a warning intent to a vengeful intent. The main study involved a2 (service failure severity) x2 (NWOM with warning versus vengeful intent) factorial experiment. Stimuli were presented to subjects online using a mock online web posting. The scenario described a service failure associated with non-acceptance of a gift card in a brick-and-mortar retail establishment. A national sample was recruited through an online research firm. A total of 113 subjects participated in the study. A total of 104 surveys were analyzed. The scenario was perceived to be realistic with 92.3% giving the scenario a greater than average response. Manipulations were satisfactory. Measures were pre-tested and validated. Items were analyzed and found reliable and valid. MANOVA results found the multivariate interaction was not significant, allowing our interpretation to proceed to the main effects. Significant main effects were found for post intent and service failure severity. The post intent main effect was attributable to attitude toward the firm, positive word of mouth and behavioral intention. The service failure severity main effect was attributable to all four dependent variables: firm competence, attitude toward the firm, positive word of mouth and behavioral intention. Specifically, firm competence for electronic NWOM describing high severity of service failure was lower than electronic NWOM describing low severity of service failure. Attitude toward the firm for electronic NWOM describing high severity of service failure was lower than electronic NWOM describing low severity of service failure. Positive word of mouth for electronic NWOM describing high severity of service failure was lower than electronic NWOM describing low severity of service failure. Behavioral intention for electronic NWOM describing high severity of service failure was lower for electronic NWOM describing low severity of service failure. Therefore, H1a, H1b, H1c and H1d were all supported. In addition, attitude toward the firm for electronic NWOM with a warning intent was lower than electronic NWOM with a vengeful intent. Positive word of mouth for electronic NWOM with a warning intent was lower than electronic NWOM with a vengeful intent. Behavioral intention for electronic NWOM with a warning intent was lower than electronic NWOM with a vengeful intent. Thus, H2b, H2c and H2d were supported. However, H2a was not supported though results were in the hypothesized direction. Otherwise, there was no significant multivariate service failure severity by post intent interaction, nor was there a significant univariate service failure severity by post intent interaction for any of the three hypothesized variables. Thus, H3 was not supported for any of the four hypothesized variables. This study has research and managerial implications. The findings of this study support prior research that service failure severity impacts consumer perceptions, attitude, positive word of mouth and behavioral intentions (Weun et al. 2004). Of further relevance, this response is evidenced in the online context, suggesting the need for firms to engage in serious focused service recovery efforts. With respect to perceived intention of electronic NWOM, the findings support prior research suggesting reader's attributions of the intentions of a source influence the strength of its impact on perceptions, attitude, positive word of mouth and behavioral intentions. The implication for managers suggests while consumers do find online communications to be credible and influential, not all communications are weighted the same. A benefit of electronic WOM, even when it may be potentially damaging, is it can be monitored for potential problems and additionally offers the possibility of redress.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.2
• /
• pp.287-294
• /
• 2009

This study was conducted to evaluate the perception and satisfaction of undergraduates majoring in culinary arts and food service with working and internship abroad. The responses of the participants to 10 questions regarding perception and 13 questions regarding the importance and satisfaction with working and internship abroad were measured on a 5 point Likert scale. The primary results were as follows : 1) The subjects were composed of 50.9% male and 49.1% female students, of which 42.1% were employed and 57.9% experienced an internship abroad. 2) Most students went abroad to gain experience with respect to various foreign cultures in response to recommendations by the western cuisine department. 3) The items "I wish to conduct my affairs continuously"(M=4.21) and "I have good relationships with my colleagues at work"(M=4.11) received the highest points from male and female respondents, respectively. 4) Male students considered "cooperation among divisions"(M=4.11), "language skills"(M=4.38), and "kitchen environment"(M=4.34) to be very important. However, female students believed that "language skills"(M=4.36),"social relationships"(M=4.21), and "wage income"(M=4.18) were most important. Furthermore, male students were most satisfied with "company size" (M=4.28), "kitchen environment"(M=4.21), and "business hours"(M=4.10), while female students were most satisfied with "kitchen environment","incentive"(M=4.14) and "social relationships"(M=4.11).

• Korean Journal of Agricultural Science
• /
• v.4 no.2
• /
• pp.126-140
• /
• 1977

Present studies were carried out for breeding cold resistant clones of Citrus, improving overwintering techniques of Citrus in Jeju island as well as other southern region, Result obtained were as follows 1. In the vinyl house covered with two sheets of straw mat, 12 indivuals were found as non-injury and 15 were slightly injured by leaf freeging test at $-9^{\circ}C$ for 2 hours treatment. 2. In the condition of vinyl house covered with straw mat and viny film mulching and heat-in by sun-light, the inside temperature of vinyl house were not lowered below $-3^{\circ}C$ and the ground temperatura in vinyl house keeps above $0^{\circ}C$ during winter though outdoor temperature were lower by $-15^{\circ}C$(Daejeon area). 3. The vinyl tunnel inside the vinyl house and vinyl film mulching on ground position showed greater effectiveness for preventing heat loss from house but there were no significant difference between the color of vinyl film covered the tunnel. 4. In the vertical distribution of maximum temperature in vinyl house, the upper space was slightly higher than the lower position at high temperature condition, while minimum temperature was distributed as higher as the middle position, ground surface and upper position in order at low temperature condition 5. In the horizontal distribution of temperature in vinyl house, ground and surface-temperature of north side was lower than the other sides, and citrus planted within 30cm from north side wall died by cold injury and in the other side near wall appeared slight symptom of cold injury. 6. The insulating trench ($30{\times}30{\times}30cm$) packed with straw bundle installed under north wall might be effective to prevent heat loss of ground temperature. 7. In cloudy and snowy day, the temperature difference between indoor and outdoor were less, and the indoor temperature were maintained highly during night due to the effect of prevention of heat loss. 8. The highest temperature in a day was observed at about P.M. 3 both inside and outside of vinyl house and the lowest temperature was observed at about A.M. 6. The difference between the highest and lowest temperature of indoor in a sunny day was $19^{\circ}C$, compared with $9^{\circ}C$ on a cloudy or snowy day in late November. Especially, lowering of temperature in a snowy day was so less that the curve of temperature change was comparatively constant, 9. If the effective methods of citrus cultivation in vinyl house with improved clone such as hardiness. semi-dwarf and spur type are applied, it might be possible to cultivate the citrus tree safely in Jeju island as well as other southern rejion and to magnity the cultivation of citrus tree.

• Korean Journal of Agricultural Science
• /
• v.2 no.2
• /
• pp.357-373
• /
• 1975

This study was conducted to evaluate the winter active polycross progenies of 10 genotypes selected at the hot and dry climate of the Southern Oregon in their performance in the progeny test comparing with a high yielding variety, 'Fawn', and a winter active variety, 'TFM', as the control varieties at Daejon, Korea. Various plant and leaf characteristics, especially which related to photosynthesis, and forage production during the first summer after their establishment, were examined. The important conclusions of this study are summarized as follows: 1. The winter active genotypes and variety had less leaf fresh weight and dry weight per leaf than variety 'Fawn'. Variations among polycross progenies of genotypes for these characteristics were great. 2. The winter active genotypes and variety had less leaf area per leaf than variety 'Fawn'. Leaf area among polycross progenies of genotypes deviated greatly and poly cross progenies of 'genotype-16' had the same average leaf area as 'Fawn'. 3. Differences of specific leaf weight (S. L. W.) in the winter active genotypes and variety were not significant. Probably the genetic diversity for S. L. W were not big and were narrowed down already in this genetic population. It was suggested that the photosynthate production within the population might not be different and there might be differences in the photosynthate production-translocation balance. Further study for the diurnal change in S. L. W. within the population might be useful. 4. The winter active variety and genotypes had less leaf width than 'Fawn' does. Leaf width among polycross progenies of genotypes deviated significantly. 5. Differences among controls and polycross progeny group in the initial plant height were significant and variety 'Fawn' was taller than the winter active genotypes and variety. But the differences were not significant in the regrowth of plant height after the first forage harvest. On the contrary. the differences among polycross progenies of genotypes were not significant in the initial plant but the differences in their polycross progeny performance became obvious and great in the regrowth ability which is an improtent agronomic characteristics for forage crops produced in the pasture and for hay and silage. 6. Plant width of the winter active genotypes and variety was lesser than 'Fawn' variety. 7. Differences of tiller number became evident and variety 'Fawn' had higher tiller number than the winter active genotypes and variety after the first forage cutting. There, deviations among polycross progenies of genotypes were great for this characteristic. It was obvious that the genetic differences became more evident in the second measurement after the first cutting of forage probably because this characteristic were stimulated by defoliation in the cartain genotypes and variety. 8. The winter active genotypes and variety on the initial growth. the regrowth ability andtotal yield had lesser forage yield than variety 'Fawn'. Deviation of forage yield among polycross progenies of genotypes were great and gave basis for selection according to their polycross progeny performance improving the forage yield of these winter active tall fescue population during summer. 9. It was concluded that the winter active variety and genotypes in this study was poorer than variety 'Fawn' for the most of leaf and plant characteristics including forage yield. For these measurements, the variations among polycross progenies of genotypes were great. and plant breeding might able to improve further this winter active tall fescue through the polycross progeny testing method for the higher forage production during summer in Korea. 10. The result of the associations among various characteristics under study were quite agreeable with the results of the analysis of variance and woul be useful in the selection of desirable genotypes for the development of a new variety.

• Korean Journal of Agricultural Science
• /
• v.4 no.2
• /
• pp.215-228
• /
• 1977

In order to provide good germplasm for developing good corn hybrids, a total of 948 Korean indigenous corn lines were collected from various parts of country and major morphological characterstics of ears were investigated. The results obtained were as follows; 1) Ear Type; From the east-north mountaionus region where more than 80% of total corn production is practiced, cylinder (type I) or similar types to cylinder corn were collected, and from the southern plain region, where rather small scales of corn is grown, cone type (type IV) or similar types to cone were prevalent. 2) Kernel color; In the ear colors of all the indigenous corn lines collected from ten regions, ears with mono color were 54.4%, ears with two color mixed were 39.0% and ears with three or more color mixed were 6.6%. In northern mountainous region, region A and region I, ear color was mostly white or white plus other colors, while in other regions ear color was yellow or yellow plus other colors. 3) Denting; Dent type was only 4.3% of Korean indigenous corn lines collected, and others were flint type. Dent type was collected from northern regions, where foreign corn varieties were introduced and grown. 4) Ear row number; Ear row numbers of indigenous corn lines collected were 12 to 16. There was no significant differences among the ear row numbers in a ear ciassified by regions. However, it was observed that ear row number was closely related to kernel size. For instance, the ears with 24 ear-rows were the smallest in kernel size. 5) Quality of starch; 70.9% of the indigenous corn lines collected were kernels with hard starch. Corn with soft starch was 26.0% and medium type was 3.1%. In region A and region I, where lot of corn is grown, corn with hard starch was more frequently collected. 6) Pop corn and waxy corn; In all the indigenous corn lines collected, popcorn was distributed uniformly through the regions except region I, and waxy corn was found more in the northern mountainous region. 7) Ear length; The mean ear length of indigenous corn lines collected was 13cm. In region A and region I ear length was larger than that in other regions. 8) Ear diameter; The mean ear diameter of indigenous corn lines collected was 3.3cm. In region A and region I ear diameter was larger than that in other regions. 9) Kernel length, kernel width and kernel thickness; The mean kernel length, kernel width and kernel thickness of indigenous corn lines collected were 0.82cm, 0.42cm, and 0.78cm, respectively. The kernel size in the region A and region I was larger than that in other regions. 10) Ear weight; The mean ear weight of indigenous corn lines collected was 58.04gr. Ear weight was remarkably heavier in region A and region I. The heaviest ear weighed 330gr, and the lightest ear weighed 5 gr. 11) Kernel weight of a ear and 100 kernel weight; Kernel weight of a ear and 100 kernel of indigenous corn lines collected were 47.07gr and 15.07gr, respectively. Kernel weights and 100 kernel weights were much heavier in region A and region I than other regions.

• Journal of Radiation Protection and Research
• /
• v.21 no.4
• /
• pp.273-284
• /
• 1996

Embryos and fetuses are more sensitive to various environmental agents than are adults or children. The biological effects such as intrauterine death and malformation are closely connected with prenatal exposure very various agents. The sensitivity of these embryonic/fetal effects depends on the stage of pregnancy. From the viewpoint of fetal development, embryonic and fetal stages can be divided into three stages : Preimplantation, organogenetic and fetal. Each stage corresponds to 0 to 4.5days, 4.5 to 13.5days, and 13.5days of gestation in mice, respectively. Many studies on the biologcal effects of mice irradiated by ${\gamma}-rays$ at various stages during organogenesis and fetal period have been performed. Based on these results, the dose-effect and dose-response relationships in malformations, intrauterine death, or retardation of the physical growth have been practically modeled by the ICRP(International Commission on Radiological Protection) and other international bodies for radiation protection. Many experimental studies on mice have made it clear that mice embryos in the preimplantation period have a higher sensitivity to radiation for lethal effects than the embryos/fetuses on other prenatal periods. However, no eratogenic effects of radiation at preimplantation stages of mice have been described in many textbooks. It has been believed that 'all or none action results' for radiation of mice during the preimplantation period were applied. The teratogenic and lethal effects during the preimplantation stage are one of the most important problems from the viewpoint of radiological protection, since the preimplantation stage is the period when the pregnancy itself is not noticed by a pregnant woman. There are many physical or chemical agents which affect embryos/fetuses in the environment. It is assumed that each agents indirectly effects a human. Then, a safety criterion on each agent is determined independently. The pregnant ICR mice on 2, 48, 72 or 96 hours post-conception (hpc), at which are preimplantation stage of embryos, were irradiated whole body Cesium-gamma radiation at doses of 0.1, 0.25, 0.5, 1.5, and 2.5 Gy with dose rate of 0.2 Gy/min. In the embryos from the fetuses from the mice irradiated at various period in preimplantation, embryonic/fetal mortalities, incidence of external gross malformation, fetal body weight and sex ratio were observed at day 18 of gestation. The sensitivity of embryonic mortalities in the mice irradiated at the stage of preimplantation were higher than those in the mice irradiated at the stage of organogenesis. And the more sensitive periods of preimplantation stage for embryonic death were 2 and 48 hpc, at which embryos were one cell and 4 to 7 cell stage, respectively. Many types of the external gross malformations such as exencephaly, cleft palate and anophthalmia were observed in the fetuses from the mice irradiated at 2, 72 and 96 hpc. However, no malformations were observed in the mice irradiated at 48 hpc, at which stage the embryos were about 6 cell stage precompacted embryos. So far, it is believed that the embryos on preimplantation stage are not susceptible to teratogens such as radiation and chemical agents. In this study, the sensitivity for external malformations in the fetuses from the mice irradiated at preimplantation were higher than those in the fetuses on stage of organogenesis.

• Journal of Radiation Protection and Research
• /
• v.31 no.4
• /
• pp.203-210
• /
• 2006

Purpose : To estimate the dose to the embryo/fetus of a pregnant patient with brain tumors, and to design an shielding device to keep the embryo/fetus dose under acceptable levels Materials and Methods : A shielding wall with the dimension of 1.55 m height, 0.9 m width, and 30 m thickness is fabricated with 4 trolleys under the wall. It is placed between a Patient and the treatment head of a linear accelerator to attenuate the leakage radiation effectively from the treatment head, and is placed 1 cm below the lower margin of the treatment field in order to minimize the dose to a patient from the treatment head. An anti-patient scattering neck supporters with 2 cm thick Cerrobend metal is designed to minimize the scattered radiation from the treatment fields, and it is divided into 2 section. They are installed around the patient neck by attach from right and left sides. A shielding bridge for anti-room scattered radiation is utilized to place 2 sheets of 3 mm lead plates above the abdomen to setup three detectors under the lead sheets. Humanoid phantom is irradiated with the same treatment parameters, and with and without shielding devices using TLD, and ionization chambers with and without a build-up cap. Results : The dose to the embryo/fetus without shielding was 3.20, 3.21, 1.44, 0.90 cGy at off-field distances of 30, 40, 50, and 60 cm. With shielding, the dose to embryo/fetus was reduced to 0.88, 0.60, 0.35, 0.25 cGy, and the ratio of the shielding effect varied from 70% to 80%. TLD results were 1.8, 1.2, 0.8, 1.2, and 0.8 cGy. The dose measured by the survey meter was 10.9 mR/h at the patient's surface of abdomen. The dose to the embryo/fetus was estimated to be about 1 cGy during the entire treatment. Conclusion : According to the AAPM Report No 50 regarding the dose limit of the embryo/fetus during the pregnancy, the dose to the embryo/fetus with little risk is less than 5 cGy. Our measurements satisfy the recommended values. Our shielding technique was proven to be acceptable.