• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1832-1835
• /
• 2010

본 연구는 이상홍수와 급속한 도시화로 인하여 설계 및 축조 당시의 수문, 기상환경이 변화함에 따라 해마다 증가하는 저수지관련 홍수피해에 효율적으로 대처하기 위하여 국내 농업용 저수지 17,649개 중 14,154개(80.2%)에 해당하는 30만$m^3$ 이하의 소규모 저수지를 대상으로 댐 붕괴에 의한 저수지 하류의 피해 규모 및 피해양상을 정량화 할 수 있는 피해예측모델을 개발함으로써 저수지 하류하천 위험기준을 수립할 수 있는 방안을 제시하고자 한다. 이를 위해 경기도 용인시에 위치한 창리저수지(20.0만$m^3$)를 대상으로 댐 붕괴 시나리오를 작성하고 빈도별홍수량 및 가능최대홍수량(Probable Maximum Flood, PMF)을 산정하여 HEC-HMS 모형을 이용한 댐 붕괴 모의를 실시하였다. 하류부 홍수해석은 창리저수지 직하류 화곡천(1.12km) 구간에 대해 HEC-RAS 모형을 이용하여 댐 붕괴 홍수파 수문곡선에 따른 홍수범람도를 작성하였다. 또한 홍수범람구역에 해당되는 행정구역의 자산DB를 구축하고 홍수피해산정 방법으로 널리 사용된 다차원법(Multi - Dimensional Flood Damage Analysis, MD-FDA)과 기존 간편법의 장점을 살려 댐 붕괴에 따른 하류부 홍수피해액을 산정하였다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.2
• /
• pp.75-78
• /
• 1977

Corn (Zea may, L.) was grown alternatively in nutrient solution and hydroxy Al or Al-citrate solution to identify the form of Al which induces Al toxicity on Corn seedlings. Corn seedlings exposed to hydroxy Al solution was very toxic but Al-citrate solution did not show any toxic symptoms. At pH 7 with Al-citrate solution, severe Fe, deficiency was induced probably by the decrease of stability constant of Al-and Fe-oganic complexes and subsequent precipitation of Al-and Fe-as a hydroxide form. Addition of humic acid ameliorated the Al toxicity somewhat at pH 4.7 with hydroxy-Al solution but at pH 7 it induced more severe Fe deficiency.

• Journal of Sensor Science and Technology
• /
• v.9 no.3
• /
• pp.224-232
• /
• 2000

Aluminum metal process in surface micromachining enables to fabricate Al electrodes or Al structures, which improve electrical characteristics by reducing contact- and line-resistance or makes the whole process to be simple by using oxide as sacrificial layer. However, it is not possible to use conventional sacrificial layer etching process, because HF solution attacks aluminum as well as sacrificial oxide. The mixed solution of BHF and glycerine as an alternative shows the adequate properties to meet with this end. The exact etching properties, however, are sensitively depends on the geometry of the released structure, because the most etching process of sacrificial layer proceeds to the lateral direction in narrow space. Also, the surface roughness of aluminum affects to the etching characteristics. This paper reports experimental results on the effect of microstructure and surface roughness of aluminum to the etching properties. Considering these effects, we propose the optimized etching condition, which can be used practically for the fabrication of aluminum electrodes and microstructures by using standard surface micromachining process without modification or additional process.

• Journal of Mushroom
• /
• v.15 no.1
• /
• pp.45-53
• /
• 2017

Profitability of farmers has decreased mainly owing to low price while the gross amount of mushroom production has increased continuously in South Korea. In this regard, analyzing patterns of mushroom consumption is believed to be meaningful. We used a panel data set consisting of 667 families, from 2010 to 2015. Based on the panel data, mushroom consumption patterns of people living in city areas were examined. Multiple descriptive analysis methods and frequency analysis approaches were adopted in this study in terms of time and space dimensions, demographic properties, and purchase behaviors. The findings of this studyshow that mushroom purchase is highly dependent on seasonal events, which implies that the product consumption timing is predictable. In addition, yearly purchase amount patterns reflect that superstores have become the major mushroomtrading venues. This directly supports the need to establish supply chain capabilities for mushroom farmers so that they gain more bargaining power against enterprise-type groceries. Finally, functional features of mushroom can be linked with marketing promotion because purchase patterns demonstrate potential needs for healthcare food in mushroom categories. Based on the analyzed patterns, this paper provides insightful implications for policy makers who want to promote mushroom consumption.

• Journal of Conservation Science
• /
• v.30 no.1
• /
• pp.27-32
• /
• 2014

The sample book was printed in 1935. Since the books in the early twentieth century were printed using acidic paper, the color of the paper would change to brown over time due to iron corrosion. In addition to corroding iron cores, the acidity of the paper (pH 3.2) also made the paper brown and fragile, as was true in the case of the sample book. To clean the paper of the sample book and to make it strong, we replaced the iron core and performed wet cleaning on the paper to remove contaminants. Then we pressed the sample book dry, and subsequently linening every page with Minoshi($4g/m^2$). Generally, book conservator rebinding the book using wires or threads: however we have devised a new method to rebind the book using colored iron cores. To color the iron core brown, they were dipped in an aqueous coloring solution ($H_2O$, $C_2H_5OH$, $CuSO_4{\cdot}5H_2O$, $FeCl_3{\cdot}6H_2O$); subsequently, a 20% paraloid B-72 was applied to protect the colored iron cores from corrosion.

• Journal of the Korean Institute of Gas
• /
• v.7 no.2 s.19
• /
• pp.22-32
• /
• 2003

Al-brass material is generally used at the state of plastic deformation, for example; bending, extension of bell mouth at shell and tube type heat exchanger. And SCC(stress corrosion cracking) of Al-brass material will be affected by residual stress as plastic deformation. SCC results from synergism between mechanical factor and corrosion environment. Mechanical factor is stress that directly relates with stress intensity factor at the crack tip. This paper was studied on the effect of stress on SCC of Al-brass tube under in $3.5\%$ NaCl. + $0.1\%\;NH_4OH$ solution by constant displacement tester. Increasing of acidified water flow into sea and speeds up corrosion rate of Al-brass which is used as a tube material of vessel heat exchanger by polluted coast seawater. The experimental results are as follow The latent time of SCC occurrence gets longer as the initial stress intensity factor($K_{Ii}$) gets lower The main crack was propagated as the initial stress intensity factor($K_{Ii}$) gets higher, and secondary cracks occurred by electro-chemical factor a(ter stage of released stress. Dezincification phase showed around the crack, and the range of dezincification gets wider as the initial stress intensity factor($K_{Ii}$) gets higher.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.3
• /
• pp.27-33
• /
• 2008

With increasing use of portable appliances such as PDA and cellular phone, changing environment of applications requires higher solder joint reliability. The ENIG (Electroless Nickel Immersion Gold) process has been widely used for fine pitch SMT (Surface Mount Technology) and BGA (Ball Grid Array) packaged devices due to its benefits including excellent solderability, high uniformity and substantial legibility throughout the packaging process. Its brittle fracture of solder, however, has received increasingly attentions. It was Down that fracture brittleness is mainly related with black pad resulting from galvanic nickel corrosion and P-enriched layer formation between the IMC (Intermetallic Compounds) and electroless nickel layer. Theoretically, smooth electroless Ni layer was blown to have a advantages in minimizing the black pad phenomenon by uniform solution exchange during immersion gold plating. Nevertheless, how to control the surface morphology of electroless Ni layer has been hardly blown. This study investigates an effect of surface morphology of Cu underlayer on surface morphology of electroless Ni layer. To obtain various kinds of surface morphology of Cu layer, two types of Cu etching chemical and a number of Cu etching treatment were applied.

• Korean Journal of Microbiology
• /
• v.41 no.3
• /
• pp.168-176
• /
• 2005

Vibrio vulnificus, one of the marine bacterial pathogens causing septicemia, was detected using molecular methods, namely, PCR and/or Southern hybridization, and real-time PCR. Extracted and purified total DNAs by using commercial kits were used as templates for PCR. Multiplex-PCR was conducted by employing three sets of primers for the genes, hemolysin (vvhA), phosphomannomutase (pmm), and metalloprotease (vvpE), for V vulnificus virulence. The presence of DMSO ($5\%$) and BSA ($0.1\%$) in PCR reaction mixture improved a detection efficiency by higher PCR band intensities. TaqMan real-time PCR was carried out by using gene segment of vvhA as a target. Detection limit of PCR/Southern hybridization without enrichments was to be around $10^2\;cells\;g^{-1}$ of sample. However, those three methods using the enrichment at $35^{\circ}C$ in APW showed high sensitivity ($2\~10\;cells\;g^{-1}$ of sediments). Highly sensitive detection of V vulnificus by real-time PCR was achieved within $5\~6$ hr, whereas the detection by PCR/Southern hybridization required about 36 hr. Thus, it was evident that real-time PCR is the most rapid and efficient method for detecting V vulnificus in tidal flat sediments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.4
• /
• pp.405-412
• /
• 2012

In the past, a very popular way to reduce the corrosion rate of zinc was the use of chemical conversion layers based on $Cr^{+6}$. However, the use of chromium salts is now restricted because of environmental protection legislation. Previous research investigated the optimum corrosion resistance of galvanized steel treated with an organic/inorganic solution containing Si. The result showed that the optimum corrosion resistance occurred by heat treatment of $190^{\circ}C$ in 5 min. In this study, one organic and three hybrid organic/inorganic coating solutions were applied to cold-rolled (CR) carbon steel. The coatings were then evaluated for corrosion resistance under a salt spray test. The coating solutions examined in this study consisted of urethane-only, urethane-Si, urethane-Si-Ti, and urethane-Si-Ti-epoxy. The results of the 7 h salt spray test showed that the urethane-Si-Ti and urethane-Si-Ti-epoxy coating solutions had superior corrosion resistance on CR steel.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2014

A large amount of acidic waste solution is generated from the practical electrokinetic decontamination equipments for the remediation of soil contaminated with uranium. After filtration of uranium hydroxides formed by adding CaO into the waste solution, the filtrate was recycled in order to reduce the volume of waste solution. However, when the filtrate was used in an electrokinetic equipment, the low permeability of the filtrate from anode cell to cathode cell due to a high concentration of calcium made several problems such as the weakening of a fabric tamis, the corrosion of electric wire and the adhension of metallic oxides to the surface of cathode electrode. To solve these problems, sulfuric acid was added into the filtrate and calcium in the solution was removed as $CaSO_4$ precipitate. A decontamination test using a small electrokinetic equipment for 20 days indicated that Ca-removed waste solution decreased uranium concentration of the waste soil to 0.35 Bq/g, which is a similar to a decontamination result obtained by distilled water.