• Bulletin of the Korean Institute for Industrial Safety
• /
• v.2 no.1
• /
• pp.34-40
• /
• 2002

화학설비나 산업설비 또는 국가 기간 설비에서 파이프(pipe)는 중요한 위치를 차지하고 있으며 파이프의 파열은 그대로 대형 사고나 설비 가동의 중단으로 연결되는 경우가 많다. 따라서 파이프의 구조건전성을 유지하는 것은 안전의 확보와 생산 설비의 효율적 운용을 위하여 긴요하다. 파이프 재료 내부에는 재료 제작 시, 또는 파이프 제작 시 발생된 결함이나 사용 중 부식이나 피로 등의 영향으로 생성된 결함이 존재한다. 이러한 결함은 파이프의 강도를 낮추게 되고, 파이프의 잔류강도가 사용압력보다 낮아지게 되면 파이프가 파열하게 된다. 따라서 본 글에서는 파이프에 균열이 존재하거나 손상된 경우의 구조안전성 평가를 위하여 필요한 해석방법에 대하여 살펴본다.(중략)

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.2
• /
• pp.10-17
• /
• 2016

Steel corrosion is a very significant problem both to durability and structural safety since reinforcement has to support loads in tensile region in RC(Reinforced Concrete) member. In the paper, newly invented FRP Hybrid Bar and normal steel are embedded in RC beam member, and ICM (Impressed Current Method) is adopted for corrosion acceleration. Utilizing the previous theory of Faraday's Law, corrosion amount is calculated and flexural tests are performed for RC beam with FRP Hybrid Bar and steel, respectively. Corrosion amount level of 4.9~7.8% is measured in normal RC member and the related reduction of flexural capacity is measured to be -25.4~-50.8%, however there are no significant reduction of flexural capacity and corrosion initiation in RC samples with FRP Hybrid Bar due to high resistance of epoxy-coated steel to corrosion initiation. In the accelerated corrosion test, excellent performance of anti-corrosion and bonding with concrete are evaluated but durability evaluation through long-term submerged test is required for actual utilization.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.532-537
• /
• 1997

최근 세계 각 국에서는 노후된 원전의 연장운전과 관련하여 주요기기의 손상진단 또는 수명평가를 통한 지속적인 안전성 보장과 원전의 정비계획 수립, 효율적인 원전이용 등을 위하여 기기의 손상평가 및 성능감시를 수행할 수 있는 각종 감시시스템을 개발하고 있다. 국내의 경우도 발전소 가동년수 증가와 함께 안정적인 전력수급을 위해 연장운전에 대한 타당성 검토를 수행한 바 있으며, 그 후속연구도 진행될 예정으로 있어 발전소를 구성하고 있는 주요 기기의 안전성 확보와 신뢰도 향상이 요구되고 있다. 이러한 측면에서 Prototype 형태로 기기 건전성 평가에 활용할 수 있는 과도상태, 조사취화, 피로손상, 균열성장 및 부식손상 평가모듈을 개발하고, 이를 통합하여 원자력 발전소 종합 진단감시시스템을 구축하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.51-58
• /
• 2016

Concrete structure is a construction material with durability and cost-benefit, however the corrosion in embedded steel causes a critical problem in structural safety. This paper presents an evaluation of chloride resistance and pull-off performance with various corrosion level. For the work, OPC(Ordinary Portland Cement) concrete and GGBFS(Ground Granulated Blast Furnace Slag) concrete are prepared with normal steel. Artificially notch induced FRP Hybrid Bar is also prepared and embedded in OPC concrete and accelerated corrosion test is performed. Through the test, FRP Hybrid Bar with notch is evaluated to have insignificant effect on pull-off capacity when corroded steel shows only 21% level of pull-off capacity. Furthermore GGBFS concrete with normal steel shows over 70% level of pull-off capacity due to reduced corrosion currency.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.2
• /
• pp.141-150
• /
• 2004

Recently, it is really concerned about corrosion and aging of reinforced concrete bridges. Corrosional steel reinforcing in concrete affects not only safety of bridges structure but also bending strength of reinforced concrete's member. Rate of corrosion, characteristic of bending strength, and economical evaluation aren't clear in reinforced concrete, considering performance evaluation. The purpose of study is as follows. It studies about ability of resistance's strength and cost of life cycle according to reduction of steel reinforcing's corrosion. Moreover, it shows calculating formula of bending strength with corrosion of current rate and exactly evaluates about the rest life at corrosional reinforced concrete bridges.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.197-205
• /
• 2020

In 2014, The Housing Act amended to allows vertical extension and increases the units of housing (or total floor area) to site. Currently, the feasibility of performing vertical extension is evaluated based on safety diagnosis provisions and manuals with 1st investigation stage on slope, uneven settlement, load-bearing capacity, and durability. However, a need for more reasonable evaluation criteria for the investigation is still required because there had not been any other case study on the diagnosis for the vertical extension, and the engineering basis on evaluation criteria were not suggested. Accordingly, this study is intended to suggest feasible evaluation criteria on the carbonation, chloride ion contents, corrosion of reinforcements, crack and surface deterioration of concrete for durability assessment by codes and standards of domestic and foreign countries. The results of this study are expected to be beneficial for establishing more reasonable durability evaluation criteria, and in turn, more reliable assessment protocol for vertical extension.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.124-124
• /
• 2012

부식 현상은 산업과 실생활에서 경제적, 인간의 생활과 안전에서 손실을 일으키는 요인이다. 자동차 부품, 선박 부품 및 전자 부품 산업 등 다양한 분야에서 수명 및 고장율 시험에 대한 관심이 증가하고 있다. 넓은 분야에서 염수분무시험을 적용하고 있지만, 실제 야외환경에서 발생하는 부식과의 상관관계가 확실하게 규명되어 있지 않다. 그리고 이렇게 넓은 산업전반에서 적용하고 있는 염수분부시험 방법은 시료의 부식 저항성을 판단하기 위한 시험시간이 오래 걸리고 이런 이유로 적정한 시험시간을 설정하기 어려울 뿐만 아니라 고내식성 시료의 부식평가가 어렵다는 단점을 가지고 있다. 본 연구에서는 부식의 형태에서 균일부식 현상을 이용하여 옥외 노출 부식시험과 염수분무시험, 가속부식시험 환경에 노출된 시료의 무게 감량을 측정하여 가속계수 도출과 함께 부식 정도를 예측할 수 있는 방법을 연구하였다.

• Corrosion Science and Technology
• /
• v.11 no.6
• /
• pp.213-217
• /
• 2012

The amount of spent fuel from nuclear power plants has been increasing. An effective management plan of the spent fuel becomes a critical issue, because the storage capacity of each plant will reach its storage limit in a few years. The volume of high toxic spent fuel can be reduced through a fuel processing. Advanced Fuel Cycle (AFC) system is considered to be one of the options to reduce the toxicity and volume of the spent fuel. It is necessary to set up a test facility to demonstrate the feasibility of the process at the engineering scale. The objective of the work is a development of the safety evaluation technology for the AFC system. The evaluation technology of the AFC structural integrity and processes were surveyed and reviewed. Key evaluation parameters for the main processes such as electrolytic reduction, electrorefining, and electrowinning were obtained. The survey results may be used for the establishment of the AFC regulatory licensing procedure. The establishment of the licensing criteria minimizes the trials and errors of the AFC facility design. Issues taken from the survey on the regulatory procedure and design safety features for the AFC facility provide a chance to resolve potential issues in advance.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.63-70
• /
• 1993

A simplified safety assessment is carried out on rock-cavern type disposal of LLW using the analytical repository source term (REPS) model. For reliable prediction of the leach rates for various radionuclides, degradation of concrete structures, corrosion rate of waste container, degree of corrosion on the container surface, and the characteristics of radionuclides are considered in the REPS model. The results of preliminary assessment show that Cs-137, Ni-63, and Sr-90 are dominant. For the parametric uncertainty and sensitivity analysis, Latin hypercube sampling technique and rank correlation technique are applied. The results of the potential public health impacts show that radiological dose to intruder in the worst case scenario will be negligible and that more attention should be given to near-field performance.

• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.12-19
• /
• 2014

To minimize the risk of corrosion on buried pipeline and to maximize the efficiency of cathodic protection, various indirect inspection techniques have been used for decades. In the United States, 49 CFR has regulated the external corrosion direct assessment for buried pipelines. In Korea, there is no provision for external corrosion direct assessment but there is only, according to the KGS Code, provision that if the survey of the defects of buried pipeline and the leakage test for the pipe were conducted, it is deemed to leakage inspection. We, therefore, have suggested external corrosion direct assessment method appropriate to domestic status through the survey of the regulations and standards of UK and the USA and the investigation of domestic situation on coating damage detection method. The proposed external corrosion direct evaluation method was used as the basis when introducing the precision safety diagnosis regulation for the medium-pressure pipe in Korea.