• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.6
• /
• pp.195-208
• /
• 2004

Histogram is a very useful method on various practical aspect. With increasing importance of simple calculation method and convenience, it became the basic method in digital image processing nowadays. However, basic limit of using histogram is losing spatial position information of pixels on image. This paper reanalyzes image by presenting histogram with spatial position information(spatial histogram). Also using that result, level order recursive median filter is realized. Presented recursive median filter showed much improved results on edge maintenance aspect compared to existing recursive median filter.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.2
• /
• pp.63-77
• /
• 1990

The combined deckstructure-car system of a car carrier is especially sensitive to hull girder vibrations due to mechanical excitations and wave loads. For the free and forced vibration analysis of the system, the analytical methods based on the receptance method and two schemes for efficient applications of the methods are presented. The methods are especially relevant to dynamical reanalysis of the system subject to design modification or to dynamic optimization. The deck-car system is modelled as a combined system consisting of a stiffened plate representing deck, primary structure, and attached subsystems such as pillars, additional stiffeners and damped spring-mass systems representing cars/trucks. For response calculations of the system subjected to displacement excitations along the boundaries, the support displacement transfer ratio conceptually similar to the receptance is introduced. For the verification of accuracy and calculation efficiency of the proposed methods, numerical and experimental investigations are carried out.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.25-36
• /
• 1995

The application of the reliability analysis is investigated as a probabilistic approach to the assessment of ship's structural strength and to the establishment of design format for longitudinal strength. Reliability analyses are carried out for 34 ships of tankers and bulk carriers built in HHI for some failure modes such as tensile yielding, compressive buckling and ultimate strength of hull girder. The safety assessment of each ship, the calculation of sensitivity factors and the derivation of target reliability index are performed. As results. the difference of reliability indices among ships is great for all modes. To provide more uniform levels of safety the establishment of new strength criteria using partial safety factors is performed. The partial safety factors for the design format are obtained according to the AFOSM method and the reliability-conditioned(RC) method. Finally, a design format using partial safety factors has been proposed. We could find out that new strength criteria can produce consistent reliability indices which are close to the target value.

• Journal of Korea Water Resources Association
• /
• v.51 no.7
• /
• pp.543-554
• /
• 2018

A methodology has been presented for evaluating the partial safety factors on the sliding failure mode of vertical caissons of composite breakwaters and for determining the cross sections of those by Level I reliability-based design method. Especially, a mathematical model has been suggested for the sake of a consistency of code format as well as convenience of application in practical design, for which the uncertainties associated with buoyancy and its own weight can be taken into account straightforwardly. Furthermore, design criteria equation has been derived by considering accurately the effect of uplift pressure, so that the cross sections of caissons can be assessed which must be safe against the sliding failure. It has been found that cross sections estimated from partial safety factors proposed in this paper are in very good agreement with the results of Level II AFDA and Level III MCS under the same target probability of failure. However, partial safety factors of the Technical Standards and Commentaries for Port and Harbour Facilities in Japan and Coastal Engineering Manual in USA tend to estimate much bigger or smaller cross sections in comparison to the present results. Finally, many reliability re-analyses have been performed in order to conform whether the stability level of cross section estimated by Level I reliability-based design method is satisfied with the target probability of failure of partial safety factors or not.

• The Korean Journal of Archival Studies
• /
• no.25
• /
• pp.233-278
• /
• 2010

An interest in various description of history was increased, resolutely breaking away from the existing frame also in a historical science world, under the influence of post-modernism arisen from the mid 20th century, and for this, oral history archives and oral history methodology began to attract the attention in various academia including archival science as a method for a new writing of history. Also, under the circumstance of korea having a difficulty in performing a whole reconstruction of modern age history and a liquidation of past affairs due to an absolute lack of archives, the tendency is toward more active management of oral history archives and establishing oral history archives in the context of an excavation of new archives and a reinterpretation of history, owing to the necessity in a particular situation. This article started with a critical mind regarding an absence of a collecting policy which can help an effective development of collection from a point of view of archival science, with regard to oral history archives that recently shows a rapid increase of an interest. For this, this article intended to present an new element of a collecting policy besides the study on a collecting policy performed meanwhile by an archival science world by noticing a characteristic and a collecting method of oral history archives, this can be examined largely through 'a statement of mission and collection purpose', 'a policy of collection at large', 'a definition of maintenance and use of the holdings', and 'a guide for a development of collection', and add a proposal regarding a plan to embody the parr which should be actually applied to collection of oral history archives among the existing constituents.

• Herbal Formula Science
• /
• v.15 no.1
• /
• pp.37-47
• /
• 2007

許浚(Heo Jun), the best physician on his day, wrote 東醫寶鑑(DongEuiBoGam, 1613) based on his clinical experience as a court doctor and life-long study of over 500 medical books. Now most clinicians consult 東醫寶鑑(DongEuiBoGam) for its practicality. And it is also considered as one of the most valuable medical books for basic medical studies. As 許浚(Heo Jun) mentioned on the 東醫寶鑑(DongEuiBoGam) preface. we should practice flexibility on the interpretation of the medical classics instead of binding ourselves to the precedents. But worship of 東醫寶鑑(DongEuiBoGam) may hinder the studying of new pathways. The treatment and its understandings of a disease should be based on objectivity of observation. Finding the common traits of the recipes in 東醫寶鑑(DongEuiBoGam) is important for the study of 東醫寶鑑(DongEuiBoGam). Accordingly, group synthesis of symptoms and resultant classification of recipes are vital. In this research, symptoms listed in the head part(頭門) of External Shape vol. I(外形篇 卷1) of 東醫寶鑑(DongEuiBoGam) are synthesized into 3 different parts: head-wind syndrome(頭風證), dizziness(眩暈), headache(頭痛). Classification of prescriptions according to these 3 parts is also suggested.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.155-160
• /
• 2001

Actual engineering structure is frequently very complex, and parts of structure are designed independently by different engineers. Also each structure contains so many degree of freedom. For these reason, methods have been developed which permits the structure to be divided into components or substructures, with analysis being done on a small substructure in order to obtain a full structural system. In such case, because of different mesh size among finite element model (FEM) or different matching points among FEM models and experimentally obtained models, their interfacing points may be non-matching. Solving this non-matching problem is useful to other application such as structural dynamic modification or model updating. In this work, virtual node concept is introduced. Lagrange multipliers are used to enforce the interface compatibility constraint, and interface displacement is approximated by polynomial presentation. The governing equation of whole structure is derived using hybrid variational principle. The eigenvalue of whole structure are calculated using the determinant search method. The number of degree of freedom in the eigenvalue problem can be drastically reduced to just the number of interface degree of freedom. Some numerical simulation is performed to show usefulness of synthesis method.

• KDI Journal of Economic Policy
• /
• v.17 no.2
• /
• pp.165-193
• /
• 1995

본 연구에서는 리카도가 자신의 "정치경제학(政治經濟學)과 조세(租稅)의 원리(原理)"(이하에서는"원리(原理)"라고 하겠음) 3판에 새로이 도입한 "기계(機械)"의 내용을 중심으로 기술진보(技術進步)가 고용(雇傭)에 미치는 영향(影響)에 대해 살펴보고자 하였다. 리카도는 당시 대부분의 주류 경제학자들과 마찬가지로 과학의 발전과 기술진보로 인한 새로운 기계(機械)의 도입은 근로자, 자본가 및 지주를 포함하는 모든 계급(階級)에게 유리한 결과를 가져오리라 생각하였다. 그러다가 그는 "원리(原理)" 3판을 작성하면서 이러한 자신의 견해가 잘못된 것임을 시인하고, 새로운 기계(機械)의 도입이 근로자(勤勞者)에게는 불리한 결과를 가져올 수 있음을 분석적인 방법으로 보여주었다. 그러나 이러한 리카도의 시도는 당시 및 후대의 경제학자들에 의해서도 지적되었듯이 부분적으로 논리적인 오류(誤謬)를 범하였다. 리카도의 논리적 오류를 수정하면서도 그의 문제의지(問題意識)을 부각시키기 위해 본 연구에서는 힉스에 의해 도입된 신(新)오스트리안(Neo-Austrian) 자본개념(資本槪念)과 이에 입각한 기술진보(技術進步)의 형태분류를 리카도의 분석틀에 적용시켰다. 그 결과 일정한 형태의 기술진보하에서는 수익성이 높은 기계(機械)가 도입될지라도 과도기적으로 고용(雇傭) 및 총생산물(總生産物)에 불리한 효과를 나타낼 수 있음을 보여주게 되었다. 그리고 과도기적으로 기계(機械)의 도입에 따른 기술적(技術的) 실업(失業)이 발생할 경우 그 기간에 영향(影響)을 주는 요인(要因)에 대해서도 살펴보고자 했다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.1
• /
• pp.26-32
• /
• 1997

In this paper, numerical analysis of dynamic characteristics for the plunger-type solenoid was used for a high speed solenoid valve with fast switching is discussed. The theoretic analysis of the electromagnetic field including eddy currents in the solenoid is studied by using permeance. The optimum value of design parameters which are a mass and an area of the plunger, a source voltage, a elastic modulus of the spring, a stroke, a number of turns, are obtained by the results of the investigation on effect of a parameter on others. And dynamic characteristics of acting solenoid that is the variation of magnetic force, displacement, solenoid current are investigated.

• Journal of Korean Philosophical Society
• /
• no.97
• /
• pp.5-31
• /
• 2012

Confucius has been viewed as a conservative thinker. Quite a few scholars even argued that it was Confucius who laid the foundations stone of the conservative tradition of Chinese politics. No matter how one defines "conservatism," it seems clear that the relevant passages in the Analects support such interpretation. However, Lothar von Falkenhausen, an archeologist, recently argued that what Confucius upheld as venerable tradition was not a distant past but Confucius own times. This paper attempts to resolve the contradiction between the archeological evidence of Falkenhausen's claim and the textual evidence of the Analects through closer reading of the evidence.