• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.1
• /
• pp.59-76
• /
• 2020

As a continuous increase in demand for the transportation infrastructure in the metropolitan area, the renovation of existing metropolitan and urban railway lines for the rapid transport system requires the construction of sidetrack that can operate local and express trains simultaneously. However, the construction of sidetrack after stopping the operation of the existing subway line causes a lot of economic losses, therefore it is essential to study the tunnel enlargement scheme during the operation of the existing subway tunnel. Accordingly, in this paper, basic research on the enlargement plan of the existing subway tunnel was carried out for the renovation of the existing subway line. In order to investigate the method for the sidetrack construction, the Government Complex Gwacheon station on the Gwacheon line of subway line 4 was selected as a virtual research station. Subsequently, four construction plans including tunnel cross-sectional plan for each section were reviewed and constructability and economic feasibility were compared. Finally, the stability assessment was conducted for the selected construction plan which was considered to be relatively unstable by 3-D full numerical analysis considering the sidetrack construction process.

• Journal of Korean Society of Transportation
• /
• v.22 no.5
• /
• pp.99-109
• /
• 2004

Most traffic congestion on a freeway occurs in the merge area, where conflicts between mainline traffic and on-ramp traffic are frequently generated. So far, research on the merge area has mainly dealt with free flow traffic and research on the congested traffic at the merge area is rare. This study investigates the relationships between mainline traffic and on-ramp traffic at three different segments of the merge area. For this purpose, new indicators based on such traffic variables as flow, speed, and density are used. The results show that a negative relationship exists between mainline and on-ramp flow. It is also found that the speed and the density of the right two lanes in the mainline traffic are significantly affected by the on-ramp flow. Based on the correlation analysis of the indicators, it is confirmed that the ramp influence area is the right two lanes of the freeway mainline. The revealed relationships between mainline and on-ramp traffic may help to analyze the capacity of the downstream freeway segment of the merging area in congested traffic. The findings of this studyalso provide a basis to develop a model that estimates the merge traffic volume in congested traffic, which is neither theoretically nor empirically sound in most other traffic flow models developed so far.

• Journal of Korean Society of Transportation
• /
• v.19 no.3
• /
• pp.89-100
• /
• 2001

내부순환로의 진출램프 중 성산, 홍은, 홍제, 길음, 마장 진출램프에서는 램프의 지체가 심각하여, 진출차량의 대기행렬이 내부순환로 본선에까지 이르는 대기행렬 역류현상이 발생하고 있다. 이러한 본선으로의 대기행렬 역류는 본선의 혼잡을 가중시키고 교통사고의 위험도 증가시킨다. 본 논문에서는 이러한 도시고속도로의 진출램프 혼잡을 개선하기 위해 진출램프 제어전략을 개발하였다. 진출램프 제어전략의 목표는 진출램프의 대기차량이 본선으로 역류하지 않도록 하는 것이다. 대기행렬의 역류를 막기 위해서는 진출램프의 차량이 인접한 간선도로로 원활하게 진행하도록 해야 하며, 간선도로와 진출램프의 대기행렬을 제어정책에 따라 관리할 수 있어야 한다. 이를 위해서 진출램프 진출부에 신호를 설치하여 간선도로차량의 흐름을 제어하고, 진출부 하류부 교차로와 연동제어를 하여 진출공간을 확보하였다. 또한, 대기행렬의 관리를 위해서는 대기행렬 관리계수를 정의하고 이 값에 따라 현시를 결정할 수 있는 제어식을 유도하였다. 진출램프 제어전략은 과포화 신호제어 기법을 응용하여 개발하였으며, 그 중 Equity offset과 내부미터링 기법을 연동제어에 응용하였고, Imbalanced split 기법은 대기행렬 관리계수에 따라 현시가 결정되는 제어식의 개발에 응용하였다. 진출램프 제어전략을 평가하기 위하여 진출램프의 혼잡으로 인해 본선으로 대기행렬 역류가 발생하는 내부순환로의 홍은, 홍제 진출램프를 선정하였으며, NETSIM을 통해 진출램프 제어전략의 효과를 분석하였다. 분석결과 진출램프의 혼잡이 크게 개선되며, 운영자의 관리목적에 따라 대기행렬의 관리가 이루어지는 것을 볼 수 있었다. 진출램프 제어전략은 내부순환 도시고속도로뿐만 아니라 진출램프 제어가 필요한 타도시고속도로에서도 적용을 하면 좋은 효과를 얻을 수 있을 것으로 예상된다.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.145-151
• /
• 2009

Current highway design standards is based on the safety under the free flow condition. The length of deceleration lane is also determined in terms of the deceleration distance which is necessary for the driers to adjust the vehicle speed from the speed limit on the main road to that on the exit ramp of the interchange. However, the queues are frequently developed on the deceleration, and the following vehicles to exit must decelerate on the main road. It may cause delay on the main road and traffic accidents. This study is to suggest a methodology to minimize such problems with the shock-wave theory. The queue length of exiting vehicles can be estimated by the design speeds, traffic volumes of main road and the exiting ramp, and the countermeasures to the operational problems. According to the results, the queue length can be shortened to 80% by upgrading the design speed of exit ramp as the amount of 10km/h. Fifty percent of queue length can be shortened by adding an additional lane on the ramp to two lanes.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.539-549
• /
• 2017

This paper proposes an analytical methodology of station capacity calculation on high - speed railway. Our method explicitly takes into account the effect of the number of sidings and the combination of train halting patterns (stop - stop, pass - stop, stop - pass, pass - pass) on the capacity of a station. To verify the reliability of our model, we conducted capacity analysis of selected stations using the Railsys simulator. We found that the difference in calculated capacity between our model and Railsys was less than 10%. After Monte Carlo simulation, our model was determined to be a good one. In addition, the consistency in capacity between our model and the train-path allocation program (Korea Rail Network Authority) was statistically significant.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2D
• /
• pp.227-234
• /
• 2009

At present, the length of deceleration lane at freeway diverging areas are designed based on the design speed of main lines and ramps. This is possible on assumption that diverging vehicles decelerate at deceleration section after moving to shoulder lane in advance. But with high diverging volume, several vehicles will try to change to exit lane at the same time. This will cause the distribution of main lane flows or some vehicles may encounter short deceleration length because they miss the proper time to change the lane. The purpose of this study is to establish a design guideline of the length of deceleration section considering the volume of diverging traffic. Also, the results of analysis by the FRESIM simulation model shows that some improvements in respect of delays, speeds and speed deviations of mainline and deceleration lane.

• Journal of Korean Society of Transportation
• /
• v.20 no.6
• /
• pp.115-128
• /
• 2002

Traffic engineers have developed and implemented various microscopic simulation models to verify the traffic performance and to prevent the expected problems. The existing microscopic simulation models categorize drivers into several types to reflect various drivers' driving patterns but miss the dynamics of drivers' behavior changed based upon the traffic conditions. It was found from the field data collected from two different merging sections on an urban freeway in Seoul, Korea, that the drivers' critical gap distributions are changed based on (1) the traffic density on the adjacent lane to the acceleration lane and (2) the opportunities left to merge in terms of distance to the end of acceleration lane. It was also found from the study that the drivers' critical gap distributions follow the Normal distribution. and its mean and variance change while a vehicle progresses on an acceleration lane. This paper proposes a new gap-acceptance model developed based on a set of drivers' critical gap distributions from each segment on the acceleration lanes. Through the comparison study between the field data and the results from the simulation utilizing the proposed model, it was verified that (1) the distribution of merging points on an acceleration lane to the adjacent main lane at different density levels, (2) the size of the gap accepted for merging and (3) the speed difference between the merging vehicle and the trailing vehicle at the time of merging are statistically identical to the field data at 95% confidence level.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.169-176
• /
• 2005

This paper introduces the dynamic control of acceleration lanes at freeway-ramp junctions. The feasibility of operation with flexible length of acceleration lane was tested with most possible traffic conditions. The operational qualify was also evaluated using average speed and total thru-put at both ramp section and freeway section. A CORSIM microscopic simulation model was used to evaluate the operation quality with a variety or volume conditions and three acceleration lanes, each representing different length categories. In addition, tollgate O-D data including travel times were obtained for two sections on the Gyeong-bu Freeway where an effective merging distance has been largely reduced. Its effect was analyzed and compared to the simulation results. Finally, the effects of acceleration lane are discussed and operational improvement at junctions is presented as research findings.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.2
• /
• pp.9-21
• /
• 2011

The ramp metering strategy is one of the effective ways to solve the freeway traffic congestion in peak time periods. The study was initiated with assurance that the traffic conditions of ramp and mainline that mitigate the congestion would exist. Under the moderate traffic volume levels, ramp metering is expected to improve the quality of freeway operation. To derive a range of traffic condition, three operation strategies(Do nothing, ramp metering, minimum ramp control) were set up and the ALINEA algorithm was implemented with microscopic traffic simulator "VISSIM". The volumes of mainline and ramp are key parameters for the simulation scenarios. Measures of effectiveness for the study include mainline density and average vehicle speed. Operation boundaries in terms of traffic volume were proposed for operating ramp metering strategy. The results show that under the proposed traffic conditions the ramp metering was more successful to increase average vehicle speeds. Traffic controls under the operation boundaries of traffic levels give significant effects for density and average vehicle speed. The outcomes of this study would be useful to improve the performance of ramp metering strategies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.3
• /
• pp.409-415
• /
• 2022

The length of the acceleration lane in the area of entrance terminals is calculated based on 13 PS/ton horsepower of a cargo truck in Korea, so it is generally overestimated compared with the capacity of most vehicles traveling on an entrance ramp. Most drivers have, therefore, an indiscreet tendency to enter the main lane in all sections of an acceleration lane, which affects the traffic flow of the main lane. Because of this tendency, measures are required to minimize the impact on traffic flow of the main lane. The operating speed, rate of entrance, and traffic volume for each vehicle were investigated at the entrance terminals of the interchanges (ICs) of Yangji IC, Suseok IC, Yongin IC, and Osan IC, and the level of improvement in traffic flow was analyzed via VISSIM simulation. From the VISSIM simulation analysis, 74.0 % of the total vehicles traveled over the specified speed from the nose point where drivers would be able to recognize the traffic condition of the main carriageway, or the point at which there is a simplification of the curve section. In addition, 88.6 % of the vehicles entered the main carriageway up to 0.8 points compared with the entire length of the acceleration lane. It was subsequently found that an improvement of average speed in the main carriageway and at the entrance ramp can be achieved from 60.1 km/h to 68.5 km/h by intentionally limiting the entrance point onto the main carriageway up to 0.265 points of the entrance ramp.