• Journal of Advanced Navigation Technology
• /
• v.18 no.3
• /
• pp.248-252
• /
• 2014

In this paper, press and nut runner used in press-fit or tightening the bolts and nuts at assembling process of automobile parts companies continually demand accuracy and improved productivity. Simultaneous control of production systems through synchronization configuring of the combination multi press-fit system developed multi servo press system using the low-speed serial communication. As a result, the accuracy and the productivity is improved and product quality improvement could be achieved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.6967-6972
• /
• 2014

Assembly using a bolt and nut, and rivet or pin have been used widely for forming mechanical joints. The indent method is an easier process than other manufacturing techniques and the toughness of the material is excellent. On the other hand, there are many cases in which the cracks occur on the manufacturing process as the indent method. Therefore, two kinds of models, in which a pin goes into and out PCB plate in this study were developed using the CATIA program and finite element methods were performed using the ANSYS program. When a pin was passed through a PCB plate in cases 1 and 2, the maximum loads applied to the PCB plate were 79.708N and 90.277N, respectively. When the PCB plate came out of the pin in cases 1 and 2, the maximum loads were 63.783N and 33.75N, respectively. The damage prevention and durability can be improved by applying the study results to the design of real indentation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.238-241
• /
• 2008

A brake system in automobile is one of the important parts that directly affect the safety of passengers. Particularly, disk brake module is applied to almost all kinds of automobile brake system due to its remarkable braking power and braking distance. In the disk brake module of an automobile, the bolt for tire wheel is assembled to the disk brake hub by interference fit (bolt pressing process). The process induces small deformation whose range is within tens of ${\mu}m$ and this deformation may cause the runout badness of the whole disk brake module, and even braking problems such as judder or squeal phenomena which makes the loss of braking efficiency. In this study, bolt pressing fit into hub was simulated by $ANSYS^{TM}$, a commercial structure analysis program. Also, the aspect and the cause of hub displacement were analyzed and the solution for decreasing runout of hub was proposed.

• 기계와재료
• /
• v.23 no.3
• /
• pp.138-146
• /
• 2011

자동차 차체 경량화를 위해 알루미늄 스페이스 프레임 구조가 개발되고 있으나, 관재결합이 필요하기 때문에 기존의 저항 점용접이 적용되기 어렵다. 또한, 멤버와 멤버의 연결부에서는 철강재난 고강도 재료의 사용이 요구되므로 이종재료 접합기술이 필요하다. 알루미늄 및 이종재료 접합방법으로는 볼트체결, 클린칭, SPR 접합, 접착재 등이 있으나, SPR 접합은 기계적인 결합방법의 하나로, 일반 리벳공정과는 달리 별도의 홀이 필요없기 때문에 자동화에 용이하며 작업시간도 빠르다. 리벳의 압입 방식으로 판재의 열변형이 거의 없고 친환경적인 공법으로 사용되고 있으며, 소음이 적고, 용접이 불가능한 이종재료의 결합도 가능하다. 무엇보다 자동차 양산용 장비 적용이 용이하기 때문에 기존의 저항 점용접을 대체하기 편리하다. 따라서, 본 글에서는 알루미늄 차체 부품 접합을 위한 SPR 접합공법에 대한 국내외 기술개발 동향을 분석하고, 한국기계연구원에서의 최근 기술개발 내용을 소개하고자 한다.