• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.3
• /
• pp.27-37
• /
• 1997

The paper deals with the effectiveness of various special rudders on course stability of a ship. We adopted five types of rudder, such as one normal rudder and four special rudders, which contain two rudders with concave and convex strips on sides respectively, one flapped rudder, and one rudder with end plates on tips. In the circulating water channel, model test was carried out for measuring lift characteristics of the rudders in open water. And various captive model tests were also carried out for measuring the experimental constants related with helm angle and steering in hull-propeller-rudder system. From the test results, the changes in manoeuvring hydrodynamic derivatives due to adoption of normal and special rudders were predicted. Then course stability performances of a ship with normal and special rudders were evaluated and discussed. As a result, it is clarified that the rudder with concave or convex strips and flapped rudder have no effect on course stability, while the rudder with end plates improves course stability with effect. The result in this study is expected to be used usefully when the course stability is in issue and has to be improved without amendment of hull design at initial design phase or after construction of a ship.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.153-162
• /
• 2005

This study is carried out to evaluate the sight distance change due to construction errors of vertical crest curves. Various design speeds and grades as well as various size of construction errors are incorporated in this study. After showing theoretical methodology numerical results are compared and analysed for the given ranges of parameters. New vertical curve change rate(m/%) is suggested to guarantee minimum sight distance under construction errors. As to the results, the reduction of sight distance are $2.8{\sim}21.3m$ at 120km/h, $2.0{\sim}15.1m$ at 100km/h, $1.4{\sim}10.6m$ at 80km/h, $1.0{\sim}7.5m$ at 60km/h $0.5{\sim}3.9m$ at 40km/h. Vortical curve change rates need to be increased about $6{\sim}25%$ to provide minimum stopping sight distance according to design speed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.2
• /
• pp.130-135
• /
• 2004

This paper presents a new design methods of the short-term load forecasting system (STLFS) using the data mining. The structure of the proposed STLFS is divided into two parts: the Takagi-Sugeno (T-S) fuzzy model-based classifier and predictor The proposed classifier is composed of the Gaussian fuzzy sets in the premise part and the linearized Bayesian classifier in the consequent part. The related parameters of the classifier are easily obtained from the statistic information of the training set. The proposed predictor takes form of the convex combination of the linear time series predictors for each inputs. The problem of estimating the consequent parameters is formulated by the convex optimization problem, which is to minimize the norm distance between the real load and the output of the linear time series estimator. The problem of estimating the premise parameters is to find the parameter value minimizing the error between the real load and the overall output. Finally, to show the feasibility of the proposed method, this paper provides the short-term load forecasting example.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.67-75
• /
• 2013

Korea has developed coastal farming industry due to the environmental characteristics that its three sides are surrounded by sea. The damage of coastal farming industry caused by Asterias Amurensis with very strong reproductive rate and predaciousness has increased sharply every year. Moreover, Asterias Amurensis preys on living fish and shellfish and so the damage of fishermen is vern greater. In this paper, a method is proposed to extract effectively the features from the image of Asterias Amurensis acquired in the water. Because the proposed method extracts convex features using 6-directional scanning, it selects a fewer number of feature candidates than the conventional one. In addition, after selecting candidate concave points using the extracted convex features and centers of region, the final concave features are extracted. Due to the features of the starfish which lives in groups, individuals of the starfish in the input image are concentrated. Thus, it is significant to minimize the number of feature candidates extracted from the input image. The experimental results indicate an improvement of the proposed feature extraction method over the conventional one as evidenced by the fact that the feature extract was 88 % of the feature candidates.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.8
• /
• pp.165-176
• /
• 2011

In this paper, we develop the cost minimization model to select two incentives and total order quantity with consideration of remanufacture company's return incentive. Return rate is sensitive to the incentive that the manufacture company offers. Using a EOQ(Economic Order Quantity) model of a cost minimization, we show concavities of the model about two incentives and total order quantity respectively. According to the proposed algorithm using the concavities, we find out the optimized incentive prices and total order quantity. Through numerical study, we examine sensitive analysis of the incentive price and order quantity for each parameter when the return rate is sensitive to incentive. Company lessens incentive to reduce total price. However, this makes the total price increase due to a diminution of return quantity. We expect that domestic or overseas remanufacture businesses are able to decide optimal incentive and total order quantity by this research.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.369-374
• /
• 2010

The shortest path between two points inside a simple polygon P is a minimum-length path among all paths connecting them which don't pass by the exterior of P. A linear time algorithm for computing the shortest path in a general simple polygon requires triangulating a polygon as preprocessing. The linear time triangulating is known to very complex to understand and implement it. It is also inefficient in case that the input without very large size is given because its time complexity has a big constant factor. In this paper, we present the customized shortest path algorithm for a segment-visible polygon which is a simple polygon weakly visible from an internal line segment. Our algorithm doesn't require triangulating as preprocessing and consists of simple procedures such as construction of convex hulls, so it is easy to implement and runs very fast in linear time.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.25-25
• /
• 2009

종래의 위보기 자세에서 용접은 중력이 모재의 표면으로 향하고 있어 용융금속이 중력에 의해 표면방향으로 흘러내리게 되어 용접 실시가 불가능하였다. 이에 Shield Gas Force, Trailing Gas Force 그리고 Ahead Gas Force를 적절히 적용하여 Position Welding에서 중력으로 인해 Molten Metal이 처지는 문제를 극복하여 생산성 향상으로 연결할 수 있음을 선행 실험을 통해 확인하였으나 기존의 C(Convergent)형, CP(Convergent Divergent)형 및 P(Parrallel)형 가스 노즐은 용접조건에 따라 실드 가스의 소모량이 많고, 토출되는 실드가스력이 부족하여 용접시 볼록한 이면 비드 형성을 위한 용융 풀을 효과적으로 제어 할 수 없다. 따라서 본 연구에서는 동일량의 실드 가스 공급시 가스 노즐을 통해 토출되는 실드가스의 소모를 줄이고 실드가스력을 극대화하여 저가의 고생산성을 가진 친 환경 용접기술(Green welding)에 부합하는 CDP(Convergent Divergent Parrallel)형 가스 노즐을 제작하여 기존의 CP형 가스 노즐과 비교 분석하였다. 또한 Overhead Position에서의 비드형상제어와 Flat Position에서 방풍효과를 비교해 보았다. 그 결과 CDP Nozzle은 CP Nozzle보다 동일한 유량에서 풍속은 3.5배, 냉각능력은 1.5배, 가스압력은 6.25배로 우수한 성능을 확인할 수 있었고, Overhead Position에서 가스 유량을 동일하게 하여 용접하였을 때 CP Nozzle의 경우 오목한 이면비드가 나타났지만 CDP Nozzle의 경우 볼록하게 양호한 이면비드 형상이 나타났고, Flat Position에서의 방풍효과 비교실험에서 CDP Nozzle에서는 깊고 균일한 용입을 CP Nozzle에서는 불안정한 용입이 나타났는데 이는 CDP Nozzle의 경우 풍속에 의한 Arc Blow가 적게 발생하여 상대적으로 더 나은 용입을 확인하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.4
• /
• pp.199-204
• /
• 2021

In this study, an isogoemetric analysis (IGA) method that uses NURBS (Non-Uniform Rational B-Spline) basis functions in computer-aided design (CAD) systems is employed to account for the geometric exactness of curved electrodes constituting an electro-adhesive pad in electrostatic problems. The IGA is advantageous for obtaining precise normal vectors when computing the electro-adhesive forces on curved surfaces. By performing parametric studies using numerical examples, we demonstrate the superior performance of the curved electrodes, which is attributed to the increase in the normal component of the electro-adhesive forces. In addition, concave curved electrodes exhibit better performance than their convex counterparts.

• The Korean Journal of Applied Statistics
• /
• v.35 no.4
• /
• pp.469-484
• /
• 2022

Since a large text corpus contains hundred-thousand unique words, text data is one of the typical large-dimensional data. Therefore, various feature selection methods have been proposed for dimension reduction. Feature selection methods can improve the prediction accuracy. In addition, with reduced data size, computational efficiency also can be achieved. The chi-square statistic and the information gain are two of the most popular measures for identifying interesting terms from text data. In this paper, we investigate the theoretical properties of the chi-square statistic and the information gain. We show that the two filtering metrics share theoretical properties such as non-negativity and convexity. However, they are different from each other in the sense that the information gain is prone to select more negative features than the chi-square statistic in imbalanced text data.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.193-196
• /
• 2007

본 논문은 관측기 기반 시스템에 대한 강인 디지털 재설계 방안을 제안한다. 디지털 재설계란, 기존의 안정화된 연속시간 플랜트와 이산 시간에서 설계된 디지털 제어기와의 상태 접합 및 안정도 분석을 통해 전체 시스템을 재구성 하는 것을 말한다. 그리고 전 역적 접근을 위한 방안으로서 문제를 볼록 최적화 관점으로 변환 후, 에러가 가질 수 있는 놈의 영역을 최소화 하여 상태 접합을 이루고자 하였다. 본 논문에서는 관측기 기반 시스템에 대한 디지털 재설계를 목표로 하되, 추가적인 파라미터 불확실성을 고려한 강인 디지털 재설계를 구성하게 된다. 파라미터 불확실성은 이산화 과정에서 구조적 형태가 변화하기 때문에, 이를 고려하여 주어진 식을 선형 행렬 부등식 형태로 나타내게 된다. 이 조건들을 통해 디지털 재설계의 상태 접합 및 안정도가 유도 가능하다는 것을 본 논문에서 증명하게 된다.