• Journal of the Korean Society of Food Science and Nutrition
• /
• v.4 no.1
• /
• pp.55-58
• /
• 1975

(1) 가족계획사업(家族計劃事業)이 10여년간(餘年間) 계속(繼續)되고 있으나 아직도 농촌(農村)에서는 그 성과(成果)가 저조(低調)한 것 같은데, 비단 농촌(農村)뿐만은 아니지만 전국적(全國的)으로 본사업(本事業)에 적극(積極) 주력(注力)하여 인구증가(人口增加)를 억제(抑制)하고 식량(食糧)을 위시(爲始)하여 식염(食鹽)의 소비량(消費量)도 줄이는 데 가일층(加一層) 노력(努力)해야 소득증대(所得增大)에도 이바지할 것으로 여긴다. (2) 도시(都市)가 농촌(農村)보다는 약간 덜 짜게 먹는 형편(形便)이기는 하나 하루 평균(平均) 섭취(攝取)해야 할 식염량(食鹽量)(20g)보다는 도시(都市)와 농촌(農村)이 다 같이 필요이상(必要以上)으로 4배(倍)나 많은 식염(食鹽)을 섭취(攝取)하므로 하루 빨리 소득증대(所得增大)를 모색(摸索)하여 채식위주(菜食爲主)의 식생활(食生活)에서 벗어날 수 있는 식생활(食生活) 개선(改善)이 있어야 하며 많은 식염(食鹽)의 섭취(攝取)에서 유발(誘發)되는 이차적(二次的) 부작용(副作用)을 추구(追究)하여 만일(萬一) 그것이 발견(發見)된다면 그 해결방안(解決方案)을 연구(硏究)해야 할 것이다. 이것에 또한 본연구(本硏究)의 더 큰 의의(意義)가 있다고 하겠다.

• Journal of architectural history
• /
• v.24 no.1
• /
• pp.61-70
• /
• 2015

This is a study on the construction of the Heungcheon-Temple. The results are follows. 1) The Heungcheon-Temple was anticipated to be the Jeongneung. However, when completed, the Heungcheon-Temple was symbolized Buddhism; moreover, there was a stupa enshrined sarira. The stupa was a land mark in Hanyang. While king Sejong repaired the stupa, it disappeared during the regin of King Jungjong. Before it disappeared the stupa signified a Buddhist event and a rite of good fortune. 2) The stupa was constructed using a double-frame, and there was a stone-stupa in an octagonal multi-layer temple. This single location consisted of a sarira space and a worship space. 3) Buddhist Relic(Sarira) worship was to witness holiness and therefore reics could be moved according to need. It appeared as though Buddhist Relic worship occurred in Southeast Asia. 4) The Heungcheon-Temple stupa was considered a new and superior architectural-symbol to comfort people and recognize the new order of Ming and neo-Confucianism. Therefore, the stupa was a good alternative to politics, religion, and external relations during the early Joseon era.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.599-602
• /
• 2007

To enhance the competition of National power, the investment of SOC is an essential factor for infrastructure construction. The capital for SOC is so gigantic and the national finance is limited, engagement of various subject is necessary. So, Government is promoting the private sector to invest capital in SOC development. Nevertheless the increasement of SOC investment, various problems were issued in selection & operation of BTL. Therefore, to raise the probability of success for BTL project, escalation, unification and specialization of BTL affairs, BTL selection process were suggested in this study.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.05a
• /
• pp.271-272
• /
• 2005

As regards of designing, I chose a simple wall design of repeating pattern of vertical windows, rather than making the building as a glamourous obzet. This kind of approach was intended to pursue strong image of construction company, interchanging and communicating with its confused surrounding. Therefore, I boldly removed parts that I considered needless from the facade, and used simple and easy words clearly implying the organization. Lobby is the face of the building, but since the space is deep and narrow and the reality of lease should be considered, there was limit to give original image to the lobby. Instead, high ceiling is the biggest feature of this space. Doorae Engineering-Construction Corp. is young and energetic company. I wanted to highlight the young and energetic image of the company by crossing tore oblique piece of boards. This doesn't just has a simple function as ceiling, but also work as a major subject in the space. In addition of this powerful space of oblique lines, indirect lighting is used to emphasize the character of territory, continuity and deepness of the space. Character of territory that divides main and supplementary function and main and supplementary moving line is expressed by flow of dimension, and continuity and deepness of space is emphasized by indirect lighting flowing linearly through the crack between the ceiling and the wall.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06c
• /
• pp.350-352
• /
• 2012

최근 의료 분야 소프트웨어가 발전함에 따라 3차원 가상 모델을 이용한 의료 소프트웨어의 개발도 꾸준히 증가하는 추세이다. 치열 교정 분야는 이러한 3차원 가상 모델을 적용할 수 있는 분야 중 하나이다. 치열교정 분야에서는 3차원 가상 모델을 이용하여 부정 교합 환자의 치료 초기부터 끝까지 여러 단계의 치아이동 과정을 제공한다. 치아 이동의 각 단계별로 Stereolithographic Model이 만들어지는데, 이는 투명하고 얇은 Overlay 장치를 제작하는 기초가 된다. 투명한 재질의 Overlay 장치는 심미적이고 사용이 간편하여 많은 환자들이 선호하고 있다. Overlay 장치를 제작하는 시스템을 구축한 회사로는 Invisalign System이 가장 대표적이다. Invisalign System은 미국에 본사를 둔 회사로 한국에 지사를 두고 적극적인 마케팅을 통해 3D 치열 교정 분야의 국내시장을 거의 독점하고 있다. 독점적이다 보니 비용이 다른 교정 치료보다 2배 가까이 들고 있지만, 현재 한국에서는 개발이 적극적으로 이루어지지 않는 실정이다. 이에 본 논문에서는 환자 치아의 정확하고 과학적인 진단자료를 얻어 높은 치료비용에 대한 개선과 치료 전 과정에 대한 시뮬레이션 및 Stereolithographic Model을 미리 환자에게 제공하여 만족도를 높일 수 있는 3D치열 교정 시스템을 제안한다.

• Knowledge Management Research
• /
• v.11 no.4
• /
• pp.41-66
• /
• 2010

This research examines the effect of the relatedness and the gap between Resources and mechanisms on effectiveness of inter-organizational knowledge transfer. According to the literature, there has been a competing theory between two claims; one is that inter-organizational knowledge transfer will be more effective due to the reduction of the transaction cost as the relatedness increases. And the other is that the mutual complementarity of different organizational characteristics will increase synergy. In total, the relatedness and the gap of the Resource and mechanism makes the inverted U-shaped relationship with the inter-organizational knowledge transfer. As the result of empirical analysis about 109 Korean-based Joint Ventures entered country, it shows that the relatedness of parent company's production Resources, learning mechanisms, and coordination mechanisms made the inverted U-shaped relations with the inter-organizational knowledge transfer and the gap of production Resources and adjustment mechanism formed the same relationship. However, the U-shaped relationship has been established in the relatedness of market Resources, but the gap of market Resources and the learning mechanism was not statistically significant. Through this study, I can draw a best conclusion that the inter-organizational knowledge transfer will be more effective when the relatedness and the gap of management resources and mechanisms is in optimal level. However, when it comes to market Resources, it can be inferred that the result could be the opposite because the partner country's market environment would be different.

• Korean Journal of Hazardous Materials
• /
• v.6 no.2
• /
• pp.39-46
• /
• 2018

최근 전자제품 생산업체에서 EPS를 직접생산하게 되면서 EPS 공정이 증가하고 있다. EPS에는 펜탄이 포함되어 있으며, 펜탄은 하이브리드 혼합물로 구분할 수 있어 높은 화재폭발의 위험성을 가지고 있다. 각 공정별 펜탄의 누출률은 발포기, 사일로실, 저장실 순이나 발포기의 경우 일반적으로 밀폐되어 있으므로 사일로 실이 가장 화재폭발 위험성이 높다고 판단하였다. 사일로실의 누출률 중 70%는 사일로 상단을 통해 누출되며, 사일로 상단을 통해 누출되는 펜탄의 거동을 분석하여 사일로실 위험성 완화대책을 수립하였다. 1. 폭발위험구역 2종으로 관리, 2. 사일로상단 50cm이내 환기설비 설치 또는 Push-Pull 구조의 환기설비설치, 3. 사일로 하단 1.4m이내에 가스감지기 설치, 4. 60%이상의 습도유지

• Korean Institute of Interior Design Journal
• /
• v.23 no.6
• /
• pp.178-186
• /
• 2014

Recently, a lower levels space has turned into a mediating space where people can experience urban spaces directly and it has revitalized communication between the city and company and also it has changed itself newly. In addition, this space which is connecting interior and exterior spaces of company's buildings can attract people living in the downtown as shock-absorbing and transitional space and it is getting more important part in urban context these days. Through case studies of corporate office space planning characteristics derived lower levels and to provide direction for the lower levels of the corporate office space planning purposes of the present study. Therefore, I establish the concept of the public good corporate office space and transition space, the concept of transition through the first Theoretical Methods. I investigate the properties of the transition area is used as the target for completion of the current construction culture destination since 2000, winning the corporate office, I have been talking about the characteristics of the corporate office along the lower part of the last PPS assessment criteria to apply to the building. PPS by applying an assessment factor can be derived for building enterprise case studies and analysis of the results the following conclusions about the use of publicity and transition space. First, lower levels of corporate office space had been applied to the use and activity in a very important project characteristics. Second, corporate office space, lower levels of access and linkages are important. Finally, in terms of public characteristics transition space is a important characteristic for low-rise space of headquarter buildings.

• Journal of the Economic Geographical Society of Korea
• /
• v.14 no.4
• /
• pp.671-683
• /
• 2011

The technical development of transportation and communication increases freedom of location choice. This higher freedom allows to company can pursues bigger profit than before. Company's separated spatial configurations tend to go to most optimal location, so some places showed unexpected agglomeration. This study conducted to prove "dispersed concentration" for specific example, pharmaceutical enterprises, in real business world. As a result, separation of spatial configuration clearly observed as product output goes bigger and R&D's depth goes deeper. And spatial concentration of each function was found. Most headquarters are located in Seoul, R&D centers make agglomeration at some spaces. Plants' location concentrated until 1990s, but, in 2000s, plants expand out of metropolitan area.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.531-534
• /
• 2002

Complexity in construction projects has increased over the years, which has led to an increase in the number of organizations involved in those projects. In today's environment, these organizations operate in different parts of the world requiring their personnel to be geographically distributed. So, these organizations construct and utilize the information systems. However, looking into this systems' content, those use two-dimensional planes such as pictures and drawings to check the scheduling etc., which cause the defect of communication and problems such as change order. Accordingly, this study introduces the Web 3Ds and 3D Libraries, intends to present the effect on modeling of three-dimensional work structure using Web 3D in cyberspace.