• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.621-627
• /
• 2013

In order to apply eco-friendly poly(propylene carbonate) (PPC) into barrier packaging materials, six different PPC/exfoliated graphite (EFG) nanocomposite films with different EFG were successfully prepared by a solution blending method. Their water sorption behavior was gravimetrically investigated as a function of the EFG content and interpreted with respect to their chemical structure and morphology. The water sorption isotherms were reasonably well fitted by Fickian diffusion model, regardless of morphological heterogeneities. With increasing the EFG content, the diffusion coefficient and water uptake decreased from $12.5{\times}10^{-10}cm^2sec^{-1}$ to $7.2{\times}10^{-10}cm^2sec^{-1}$ and from 8.9 wt% to 4.2 wt%, respectively, which indicates that the moisture resistance capacity of PPC was greatly enhanced by incorporating EFG into PPC. The enhanced water barrier property of the PPC/EFG nanocomposite films with the high aspect ratio EFG makes them potential candidates for versatile packaging applications. However, to maximize the performance of the nanocomposite films, further researches are required to increase the compatibility of EFG in the PPC matrix.

• Research in Plant Disease
• /
• v.28 no.1
• /
• pp.39-45
• /
• 2022

Patterns of occurrence of tomato yellow leaf curl virus (TYLCV) and tomato chlorosis virus (ToCV) with whitefly on summer-cultivated tomato in Gwangju-si, Gyeonggi Province were surveyed using multiplex reverse transcription-polymerase chain reaction in 2020. In addition, distribution of the whiteflies species and their viral transmission rates were investigated throughout the tomato growing season. The infection rates of TYLCV and ToCV increased sharply during harvest, and the single infection rates were 30.9% and 5.0%, respectively, with a mixed infection rate of the two viruses being the highest at 52.2%. Single infection with TYLCV and double infections with TYLCV and ToCV accounted for the majority with 83.1%. Bemisia tabaci were dominant over Trialeurodes vaporariorum in greenhouse grown plants, and all of the investigated B. tabaci biotypes were identified as Mediterranean (MED, formerly known as Q biotype). The transmission rate of TYLCV, detected in every sampled B. tabaci MED population, was 21.4%, and the mixed transmission rate with ToCV was 35.5%. Viruliferous MED whiteflies with ToCV showed a higher rate than that of T. vaporariorum. In the transplant stage, viruliferous rate of both TYLCV and ToCV of B. tabaci was 42.7%; this rate was highest in the harvest stage. In examination of tomato yield, the increase in the mixed infection rate of TYLCV and ToCV led to complete yield loss. When the mixed infection rate increased by 10%, the yield decreased by 405.4 kg/10a.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.4
• /
• pp.338-342
• /
• 2013

BACKGROUND: Two Field tests were conducted at Buan and Yangpyung in 2012 and 2013 to confirm controlling effect of mulberry popcorn disease and mulberry Sucker pests which are becoming serious in mass cultivation area of eco-friendly farming mulberry. METHODS AND RESULTS: As the treatments, 4 Natural products and 3 microbials were applied and 4 mulching materials were used. On the prevent effect of mulberry popcorn disease(Sclerotinia shiraiana) by using mulching materials, nonwoven fabric mulching showed worse effect than non-mulched treatment plot. Moreover, rice straw mulching showed significantly worse effect compare to nonwoven fabric and herb mulching treatments. Natural plant extracts and microbials showed 40~65% control value in 2013, which is little bit worse than 2012 results. On the control effect of mulberry Sucker(Amomoneura mori), organic products which combined with neem, sophora and derris showed excellent result as similar control level of Thiophanate-methyl. It means the chemical products can be replaced with organic product. CONCLUSION(S): According to the 2 years studied results, integrate eco-friendly farming measures are recommended for control of mulberry popcorn disease, because any single method is seemed not sufficient enough. However, natural plant extracts mixture is recommended as a product to control of mulberry Sucker.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.39-47
• /
• 2016

Repair methods of aging concrete pavement are generally used composite structure pavements, such a composite structure is subjected to a large impact on the mechanical behavior and ensure long-term commonality integrated under vehicle loads, environmental loads of the public in accordance with the bond strength between old and new concrete. A common of bonded concrete overlays that are currently available is Interface arrangements using a variety of equipment to ensure the excellent bond strength between old and new concrete than standard concrete, mixed with a material such as a polymer in order to improve the adhesion with the material itself. However, these method of constructions are being applied, depending on the developer site presents no special specifications apply when a specific application criteria objectively, this is due to the situation of each individual method, which is based on the difficulty in quality control of the site manager. In this study by performing a field test for polymer content via the variables that contribute most significantly to ensure bond strength and the field element core of the interface processing method and materials to ensure bond strength between the old and the new concrete, it was to derive the construction site construction method that can improve the performance of the bond strength through a review of the construction around the correlations and the bond strength according to the effective performance analysis of the conventional surface treatment process and variation of polymer volume fraction.

• Applied Biological Chemistry
• /
• v.48 no.1
• /
• pp.40-47
• /
• 2005

In order to develop a multi-microbial biofungicide against several important plant pathogenic fungi, strains were isolated from the phtophthora blight suppressive red-pepper field soil of Gyeongsangbuk-do, Korea. Strains AY1, AY6, AB1, BB2 and F4, which had strong antagonistic ability against Phytophthota capsici and Fusarium oxysporum, were selected for their involvement with strains of biocontrol fungicide. There were no antagonism among the selected strains and were compatible for making the biofungicide. Their antagonistic mechanisms, except for strain BB2, were an antibiosis by the production of antibiotic, while BB2 produced not only an antibiotic but also cellulase as an antagonistic mechanism against blight causing P. capsici. They were identified as Halobacterium sp. AB1, Xenorhadus sp. AY1, Bacillus sp. AY6, Bacillus sp. BB2, Zymomonas sp. F4 by various cultural, biochemical test and $Biolog^{TM}$ System 4.0. The highest levels of antifungal antibiotic could be produced after 48 hrs of incubation under the optimal medium which were 0.1% galactose, 0.1% $NaNO_2$, 5 mM $Na_2{\cdot}HPO_4$ (pH 5.5). The cultured multi-microbial biofungicide showed strong biocontrol activity against bacterial wilt disease and fusarium wilt disease in cucumber and tomato fields.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.2
• /
• pp.61-66
• /
• 2017

Poly lactic acid(PLA) and poly butylene adipate-co-terephthalate(PBAT) film was prepared using a twin extruder. PLA (25%) and PBAT (75%) were mixed with various ratio of chain extenders, such as $Joncryl^{(R)}$ and hexamethylene diisocyanate(HDI) to improve the mechanical and thermal properties of produced bio composite films. Tensile strengths of films were steadily increased with increasing ratio of chain extender. The tensile strength of control films was about 25 MPa, and the tensile strength of films with combined chain extenders was above 40 MPa. The films with $Joncryl^{(R)}$ resulted in improved tensile strength, while the film with HDI alone showed improved percent elongation at break. By adding chain extenders into PLA/PBAT resin, the cold crystallization temperature (Tcc) and decomposition temperature (Td) of the produced bio composite films increased. It revealed that the addition of two types of chain extenders was efficient way to get PLA/PBAT film with improved strength and elongation.

• Research in Plant Disease
• /
• v.24 no.1
• /
• pp.66-74
• /
• 2018

Field surveys to investigate the incidence and occurrence pattern of viruses in red pepper were conducted during 2015-2016 in Korea. A total of 424 samples in 2015 and 368 samples in 2016 were collected based on selection of plants showing symptoms from farmer's field from every June to September. Reverse transcription-Polymerase chain reaction was used to test all samples for the presence of one or more of following viruses: Cucumber mosaic virus (CMV), Broad bean wilt virus 2 (BBWV2), Tomato spotted wilt virus (TSWV), Beet western yellows virus (BWYV), Pepper mottle virus (PepMoV), Potato virus Y (PVY) and Pepper mild mottle virus (PMMoV). The average disease incidence was 91.7% in 2015 and 98% in 2016 and the all seven viruses were found although there were different kinds of regions. The percent virus incidence in collected samples during 2015 was as follows: CMV, 73.8%; BBWV2, 68.3%; BWYV, 46.9%; PMMoV, 14.6%; TSWV, 12.7%; PepMoV, 6.6% and PVY, 3.3%. For 2016, incidence was as follows: CMV, 73.3%; BBWV2, 71.4%; BWYV, 34.7%; TSWV, 27.9%, PMMoV, 19.2%; PepMoV, 13.5% and PVY, 3.5%. Mixed infections were prevalent over single infections and infection rate was 83% and 86.7% in 2015 and 2016, respectively.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.4
• /
• pp.385-410
• /
• 2016

The disposal facility in Gyeongju is planning to dispose of 800,000 packages of low- and intermediate- level radioactive waste. This facility will be developed as a complex disposal facility that has various types of disposal facilities and accompanying management. In this study, based on the comprehensive development plan of the disposal facility, a preliminary post-closure safety assessment is performed to predict the phase development of the total capacity for the 800,000 packages to be disposed of at the site. The results for each scenario meet the performance target of the disposal facility. The assessment revealed that there is a significant impact of the inventory of intermediate-level radionuclide waste on the safety evaluation. Due to this finding, we introduce a disposal limit value for intermediate-level radioactive waste. With stepwise development of safety case, this development plan will increase the safety of disposal facilities by reducing uncertainties within the future development of the underground silo disposal facilities.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.45-54
• /
• 2018

In this study, numerical analysis is performed to determine highly influential factors that increase the possibility of asphalt road collapse due to cavity underneath the road. The considered influence factors on road collapse due to underground cavity were the asphalt layer thickness, the cover depth, the cavity width, and the cavity height. The concentrated load and uniform distributed pressure were applied on the top surface of asphalt pavement layers with different shape of cavity and asphalt thickness. For each analysis case of given cavity and asphalt thickness, failure load was analyzed under displacement controlled condition. Based on the analyzed failure loads, the applicability of the cavity management system developed by Seoul city was evaluated. As a result of the analysis, the effect of cavity height on road collapse was not significant while the other factors considerably influenced road collapse. Consequently, degree of road collapse susceptibility should be classified by failure load rather than by the condition of existing cavity.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.3
• /
• pp.125-132
• /
• 2017

The effect of food simulants on properties and light barrier function of LDPE-nano $TiO_2$ composite film has been investigated. LDPE-nano $TiO_2$ composite films were prepared with 5.0wt% $TiO_2$ content by melt-extrusion. To simulate food contact environment, according to KFDA standards and specifications for food utensils, containers and packages, food simulants were selected with deionized water, 50% ethanol, 4% acetic acid and n-heptane and composite films were immersed in each food simulant at $70^{\circ}C$, 30 min except n-heptane ($25^{\circ}C$, 60 min). A variety of material properties, including crystallinity, chemical bonds, surface morphology, mechanical, oxygen barrier and optical properties, of LDPE-nano $TiO_2$ composite film were examined with and without the food simulants treatment. As a result, under regulated migration condition, LDPE-nano $TiO_2$ composite showed extremely stable in all properties tested in the study in contact with food simulants indicating that $TiO_2$ nanoparticles are physicochemically stable and quite compatible with LDPE. Results enable us to anticipate migration of $TiO_2$ will probably not occur. To evaluate influence of migration of $TiO_2$ on food stuffs, their color, pH and acidity were observed as well.