• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.9
• /
• pp.45-52
• /
• 2006

In this study, a nonlinear control by feedback linearization method, one of nonlinear control schemes based on the nonlinear model, is proposed to suppress the flutter of a supersonic composite panel using piezoelectric materials. Most of the previous panel flutter controllers are the LQR(Linear Quadratic Regulator) which is based on the linear model. A nonlinear feedback linearizing controller proposed in this study considers the nonlinear characteristics of the system model. We use the actuator implemented by piezoceramic PZT. Using the principle of virtual displacements and a finite element discretization with the conforming four-node rectangular element, we first derive the discretized dynamic equations of motion, which are transformed into a nonlinear coupled-modal equations of motion of state space form. The effectiveness of the proposed method is also compared with the LQR based on the linear model through numerical simulations in the time domain using the Newmark method.

• Journal of Digital Convergence
• /
• v.10 no.2
• /
• pp.225-229
• /
• 2012

A reformer for a small fuel cell system is an apparatus which converts hydrocarbon fuel into hydrogen-rich gas. Among many indices of a reformer, the most crucial index of a reformer is CO concentration in the off-gas out of reformer which must be controled under 5ppm for the efficiency and performance of a system. This paper suggests the criteria of a reformer operation for the stability of a reformer in a fuel cell system by deducing crucial indices and improving processes. The six-sigma technique was applied to verify the optimum control and operation of a reformer of a fuel cell combined heat and power system. The result of temperature control of each parts of a reformer system is the concentration of CO which is the most important factor for the operation of a fuel cell system. The temperature of the parts of a reformer, MTS, LTS and Prox, were controled so that the concentration of CO.

• Journal of Digital Convergence
• /
• v.18 no.10
• /
• pp.225-232
• /
• 2020

The underlaying communication scheme in 5G cellular network is a very promising resource sharing scheme, and it is an effective scheme for improving service performance of 5G and reducing communication load between a cellular link and a device to device (D2D) link. This paper proposes the algorithm to minimize the resource interference that occurs when performing 5G-based multi-class service on gNB(gNodeB) and the cooperative priority-based resource allocation scheduling scheme (CPRAS) to maximize 5G communication service according to the analyzed control conditions of interference. The proposed CPRAS optimizes communication resources for each device, and it optimizes resource allocation according to the service request required for 5G communication and the current state of the network. In addition, the proposed scheme provides a function to guarantee giga-class service by minimizing resource interference between a cellular link and a D2D link in gNB. The simulation results show that the proposed scheme is better system performance than the Pure cellular and Force cellular schemes. In particular, the higher the priority and the higher the cooperative relationship between UE(User Equipment), the proposed scheme shows the more effective control of the resource interference.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.17-26
• /
• 2002

In this paper, we have analyzed the BER (Bit Error Rate) performance of multi-user detectors employing SIC(Successive Interference Cancellation) and PIC (Parallel Interference Cancellation) which are the representative schemes in the subtractive interference cancellation. We have considered the MUD structure employing HIC (Hybrid Interference Cancellation) which combines SIC with PIC scheme, and then analyzed the BER performance. We have evaluated the BER performance of SIC and HIC schemes which execute the soft decision to generate the tentative data bit for the purpose of the interference cancellation in MAI and noise environments. Through the numerical analysis and computer simulation, it is shown that HIC can remove the effect of MAI more efficiently than the others, that improve the BER performance and increase the capacity of DS-CDMA systems regardless of the power control conditions. The reason is that the SIC scheme in front of HIC can solve the near-far problem caused by the imperfect power control and PIC scheme in the rear of it can improve the performance much more.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.6
• /
• pp.26-34
• /
• 2007

The efforts to develop high performance aircraft engines are successively progressed with development of recent technology. The reliability of individual parts and the safety of engine systems are reduced if high efficiency components, high strength materials, and precise controls are applied to the engine with complexity to increase engine performance. In this paper, the regulation requirements and assessment technique for aircraft engine safety are considered, and the result of safety assessment on a turbine case cooling system of high efficiency turbofan engine is presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.1
• /
• pp.101-105
• /
• 2014

For a localization system, the TDOA (Time Difference of Arrival) measurement and AOA (Angle of Arrival) measurement are often used for estimating target's positions. Although it is known that the accuracy of TDOA based localization is superior to that of AOA based one, it may have a poor vertical accuracy in bad geometrical conditions. This paper, therefore, proposes a localization algorithm in which the vertical position is estimated by AOA measurements and the horizontal one is estimated by TDOA measurement in order to achieve high 3D-location accuracy. And this algorithm is applied to a GPS jammer localization systems because it has a large value of the DOP (Dilution of Precision) when the jammer is located far away from the system. Simulation results demonstrate that the proposed hybrid TDOA/AOA location algorithm gives much higher location accuracy than TDOA or AOA only location.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.293-296
• /
• 2007

필드 워핑은 상대적으로 많은 연산량을 요구하는 것에 반해 제어선을 이용하여 워핑 결과를 좀 더 세밀하게 제어할 수 있는 것이 장점이다. 필드 영상 워핑 및 모핑의 동작 특성상, 국부적인 영상 확대와 축소 및 회전 등과 같은 다양한 기하학적인 변형이 복합적으로 발생하게 되는데 역방향 매핑 과정에서 소스 영상과 목적 영상의 화소가 정수 화소 단위로 대응되지 않을 경우, 목적 영상에 대응시킬 화소값을 산출하기 위해 적합한 영상 보간 기술이 필요하다. 다양한 보간 기술들 중에서 평균적으로 우수한 결과를 제공하는 양선형 보간이 보편적으로 사용되고 있으나, 이 보간 기술은 대각선 방향의 윤곽선 재현에 한계를 가지고 있다. 본 논문은 필드 워핑과 모핑을 위한 pseudomedian 필터 기반 영상보간법을 제안하고 주관적인 화질을 분석 평가함에 그 목적이 있다. 제안된 보간 방법은 양선형 보간과 윤곽선 재현에 우수한 특성을 보이는 pseudomedian 필터 보간을 효과적으로 결합한 것이다. 제안된 방법에 따르면 다른 보간 기법에 비해 상대적으로 자연스러운 워핑 및 모핑 결과를 얻을 수 있다. 제안된 방법의 타당성과 보편성을 검증하기 위해 서로 다른 분포 특성을 갖는 영상을 대상으로 주간적인 화질 측면에서 그 성능을 분석 평가하였다.

• Journal of Digital Convergence
• /
• v.13 no.1
• /
• pp.263-268
• /
• 2015

Put your information in the object-based sensors and mobile networks has been developed that correlate with ubiquitous information technology as the development of IT technology. However, a security solution is to have the data stored in the server, what minimal conditions. In this paper, we propose a data management method is applied to a hash chain of the properties of the multiple techniques to the data used by the big user and the data services to ensure safe handling large amounts of data being provided in the big data services. Improves the safety of the data tied to the hash chain for the classification to classify the attributes of the data attribute information according to the type of data used for the big data services, functions and characteristics of the proposed method. Also, the distributed processing of big data by utilizing the access control information of the hash chain to connect the data attribute information to a geographically dispersed data easily accessible techniques are proposed.

• Journal of Digital Convergence
• /
• v.14 no.7
• /
• pp.185-191
• /
• 2016

Recently, various medical services are provided with the advance of IT. However, there is a problem that a third party would exploit medical information when the information is sent and received through wired or wireless connection. In this paper, a patient information management scheme using group index information for the third party not to illegally exploit a patient's medical information without his consent is proposed. This proposed scheme creates index information in each hierarchical level to be used with access information so that not only medical staff can have access to patient's medical information hierarchically but also it can manage access level in groups. The scheme aims to enable the medical staff to minimize the time spent to analyze the type of disease and to prescribe for it so that they can improve patients' satisfaction. Plus, the scheme aims to improve work efficiency by minimizing the medical staff's workload according to the authority to access patients' medical information.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.323-328
• /
• 2014

D-MAC protocol is used convergence network, which is designed to connect wireless link between things. This protocol is supported to local data exchange and aggregation among neighbor nodes, and distributed control packet from sink to sensor node. In this paper, we analysis about efficiency of power consumption according to whether or not security authentication of D-MAC in convergence network. If authentication scheme is applied to MAC communication, it is related to power consumption of preamble whether or not with and without authentication process. It is reduced to energy consumption against denial attack of service, when it is applied to authentication. Future work will take the effort to deal with security authentication scheme.