• Composites Research
• /
• v.33 no.2
• /
• pp.50-54
• /
• 2020

Soft robotics and wearable devices require large motions and flexibility. In this regard, there is a demand for developing stretchable strain sensors which can be attached to the soft robots and wearable devices. In this work, we fabricated stretchable and electrically conductive composite fibers by combining polyurethane (PU) and silver nanoflowers (AgNFs). The PU/AgNF composite fibers showed the change of the resistance as a function of the applied strain, demonstrating the potential for stretchable strain sensors in soft robotics and wearable devices. The mechanical and electrical characteristics of the composite fibers were measured and analyzed to use the composite fibers for stretchable strain sensors.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.273-278
• /
• 2003

Recently, high-performance hybrid composite materials have been used for various industrial fields because of their superior high strength, high stiffness and lower weight. In this study, manufactured hybrid composite materials are composed of two parts. One is hard-anodized Al5083-O alloy as a face material and the other is high strength aramid fiber ($Twaron^{(R)}$ CT709) laminates as a back-up material. Resistance to penetration is determined by protection ballistic limit($V_{50}$, a static velocity with 50% probability for complete penetration) test method. $V_{50}$ tests with $0^{\circ}$obliquity at room temperature were conducted with 5.56mm ball projectiles that were able to achieve near or complete penetration during high velocity impact tests.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.94-94
• /
• 2004

고성능 섬유강화 복합재료는 단위 중량당 강성과 강도가 높으면서 가격도 저렴하여 여러 산업분야에서 널리 사용되고 있으며 특히, 경량임에도 충격에 대한 저항성이 우수하여 방탄재료로의 군사적, 민간용 이용도가 날로 증가되고 있다. 그러나 고속 충격 탄자와 같이 관통성이 뛰어난 위협 조건으로부터의 방호를 목적으로 장갑을 설계할 매는 단일 재료만으로는 충분한 방탄 성능을 가질 수 없는 경우가 많다. 이런 경우는 충격 전면에서 충격 탄자의 탄두를 일차적으로 무디게 하거나 파쇄시켜 탄자의 형상을 변화시키고, 변형된 탄자의 계속적인 관통에 대한 저항능력이 우수한 재료를 사용하여 두가지 성질을 동시에 만족시키는 장갑재료의 개발이 요구되고 꾸준히 연구되어 왔다.(중략)

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.4
• /
• pp.15-21
• /
• 2013

This study aims to estimate the fatigue resistance of small wind composite blade using the fatigue life estimation formula in the GL guideline. For this, firstly, we estimated a turbine blade's bending moment spectrum by using wind profile wind profile and BEMT. And fatigue tests were performed to obtain the S-N curve of composite materials used in blade. In addition, a finite element analysis was used to identify fatigue critical locations and fatigue stress spectrum. And the fatigue resistance of composite blade were evaluated using the rainflow cycle counting, and Goodman diagram and the fatigue life estimation formula in the GL guideline.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1993.04a
• /
• pp.59-62
• /
• 1993

고품위의 동력전달 장치와 같은 고정밀 기능 부품들은 보다 높은 비강도, 고경도, 내마모성 및 내식성을 가져야 하며, 특히 소재의 마찰, 마모 특성은 기아제품 등의 수명, 정밀도 및 에너지 손실을 좌우하는 것으로서 물성의 열화를 극복할 수 있는 소재의 개발이 요구되고 있다. 지난 수년동안 금속기지에 $Al_2O_3$나 SiC등의 보강재를 첨가하여 복합재의 응착 및 연삭마모에 대한 저항성을 향상시키는 시도를 하고 있다. 주로 제조비용이 낮고 거의 등방적인 성질을 가지며 가공성이 좋은 입자 보강 복합재료에 대한 연구가 지배적이었지만, 입자 보강 복합재료의 경우 강도 및 탄성계수의 향상 정도가 적다는 단점을 지니고 있다. 본 연구에서는 분말야금법을 이용하여 금속기지에 세라믹상으로 SiC 입자 및 휘스커가 첨가된 복합재를 제조하여 제조공정변수에 따라 마모거동을 pin-on-disk 형태의 마모시험기에서 실험하였으며, 주사전자현미경으로 마모표면관찰 등으로 복합재의 마모기구를 연구하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.181-191
• /
• 2016

This study examined the effects of exercise intensity and type on insulin resistance, cardiovascular disease risk factors, and exercise time. Obese thirty-two subjects (>body fat 30%) were randomly assigned one of four experimental groups: VO2 max 50% aerobic exercise group (MAE, n=8), VO2 max 80% aerobic exercise group (VAE, n=8), VO2 max 50% + resistance exercise group (MARE, n=8), and VO2 max 80% + resistance exercise group (VARE, n=8). Body fat significantly decreased in all groups and insulin resistance decreased significantly in MARE and VARE (p<.05 & p<.01) after exercise. CRP and IL-6 were slightly reduced after exercise, although these did not reach statistical significance, whereas the IL-6 level of the VAE group decreased significantly (p<.05). TNF-${\alpha}$ significantly decreased in the MAE group (p<.05) but significantly increased in the VARE group after exercise (p<.05). For exercise time, higher intensity exercise groups were significantly less than the lower intensity exercise groups (p<.001). These results suggest that body fat is affected by all kinds of exercise intensity and type while CRP is not. Insulin resistance and TNF-${\alpha}$ were affected by exercise type, whereas IL-6, TNF-${\alpha}$, and exercise time were affected by exercise intensity.

• Korean Journal of Environmental Agriculture
• /
• v.14 no.3
• /
• pp.319-328
• /
• 1995

This study was carried out to investigate the resistance mechanism by three different kinds of procymidone-resistant and susceptible isolates of Botrytis cinerea which had been collected from green houses. The average resistance level of the resistant strains was 1,000 times higher than that of susceptible ones. Also, it was revealed that the resistance was not originated from components excreted by Botrytis cinerea, based on the result obtained from the treatment with piperonyl butoxide and triphenyl phosphate as an inhibitor of monooxygenase and esterase, respectively. The total lipod content of resistant strains was 1.3 times higher than that of susceptible ones, among fatty acids, palmitic acid, stearic acid, and linoleic and being 3.0, 2.5, and 2.0 times higher, respectinely. Also slight differences in sterol contents and components were observed. The crude chitin content was slightly higher in susceptible strains but contents of N-acetyl glucosamine, a hydrolysate of chitin, were about 2 times higher in resistant ones.

• Journal of Digital Convergence
• /
• v.16 no.4
• /
• pp.55-67
• /
• 2018

The organizational politics strengthened resistance to change. This study explores how the organizational political perception and fairness in split firms affect resistance to change. The analysis showed that the boss's and colleague's politics is minimized by its distributional fairness and procedural fairness. The organizational politics strengthened resistance to change. Additionally, mediating effects of fairness were analyzed. As a result, it was revealed that the perception of organized politics by bosses and that colleagues' perception of organizational politics affected resistance to change based on distributional fairness. However, it was shown that procedural fairness had no mediating roles between organizational politics and change resistance. There is a need to pay keen attention to distributional fairness to minimize the resistance to changes of organizational members at the split. If distributional fairness is not secure, Members will be a political behavior.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.198-203
• /
• 1999

2D carbon/carbon composites have been prepared with and without addition of 1, 3 and 5wt% of oxidation inhibitor boron and then heat teated up to 1700, 2000, 2300, 2600 each. This paper presents the effects of boron on the mechanical properties of 2D C/C composites in terms of the acceleration of graphitization and also discussed about the retardation of air oxidation.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.1
• /
• pp.87-95
• /
• 2021

In this study, seven companies(A~G) designated as new construction technology selected and evaluated KS F 2622: Method of test for performance evaluation of membrane roofing systems that are similar to field application conditions. As a result of the test, it was confirmed that although all test specimens exceeded KS standards in the basic physical, it was difficult to obtain field quality performance in weak areas such as joints and vertical parts of the adhesive coating method in water-tightness, sagging resistance, swelling resistance tests except for fatigue(crack behavior) tests.