• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.452-454
• /
• 2012

본 논문에서는 열분해 및 촉매반응의 의한 Hydrazine의 Ammonia 전환율을 연구하였다. 원자력발전소 2차 계통은 물/증기 순환계통으로 기기 및 배관의 부식을 억제하고, 증기발생기(Steam Generator, SG)의 부식생성물 유입을 최소하기 위해 전휘발성처리법(All Volatile Treatment, AVT)을 적용하여 계통수의 pH를 약염기성으로 유지하고 있다. 또한 Hydrazine을 이용하여 계통수의 용존산소제거 및 환원성 분위기를 유지하고 있다. 현재 사용되는 AVT는 대부분 단일 아민(Ammine)으로 계통 전 영역에서 pHt를 약염기성으로 유지하기 어렵다. 따라서 복합 아민을 이용하여 단일 아민의 상호단점을 보완한 수처리법을 적용해야한다. 하지만 복합 아민을 적용할 경우 추가 아민 주입설비, 설치부지, 시설유지보수 및 관리가 요구되므로 기존 주입약품을 이용하여 아민을 공급할 수 있는 연구가 필요하다. 따라서 본 연구에서는 Hydrazine의 열분해 및 촉매반응을 이용한 Ammonia 전환율을 조사하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.3112-3118
• /
• 2010

The pH control agent in PWRs, to insure the integrity of steam generator, was changed from ammonia to ethanolamine(ETA) which decreased pH at condensate system and low pressure feedwater heater drain system, so that several amines were investigated for the selection of the optimum amine. There was no single alternative amine to meet the optimum condition. The more volatile ammonia provides the higher pH in condensate, while the less volatile ETA increases the pH in wet steam area. Thus, the combined amine of ammonia and ETA is able to equally raise the pH in both region so that the flow accelerated corrosion be reduced in the every system of the secondary side and the integrity of steam generator be also improved in pressurized water reactors (PWRs).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.272-275
• /
• 2017

최근 국내 대부분의 원자력 발전소 2차 계통 중 복수 탈염설비의 운전 시 pH를 제어하기 위해 에탄올아민(Ethanolamine, ETA)를 사용하고 있으나 ETA를 적용한 후 발생하는 폐수에 의한 방류수의 화학적 산소요구량(COD) 및 총 질소(TN)의 증가는 심각한 환경적인 문제를 발생 시킨다. ETA가 강이나 하천과 같은 수계로 유입되면 자연적으로 생분해되기 힘들고, 분해부산물이 증가되어 수질을 악화시킬 수도 있다. 이러한 문제점을 해결하기 위해 본 연구에서는 폐경석, 제강슬래그, 저회를 혼합하여 제올라이트화(zeolitization)과정을 통해 새로운 형태의 저비용, 고효율의 ETA 처리용 복합흡착제를 제조하였다. 최적의 흡착 및 이온교환능력을 갖는 복합흡착제는 폐경석, 제강슬래그 및 저회의 혼합조성비를 Mixture Analysis 통계법을 통해 도출하였다.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.10 no.1
• /
• pp.96-99
• /
• 2014

The aim of the study was to evaluate the water treatment of pressurized water reactor secondary side by the mixed amine of ammonia and ethanolamine, from the standpoint of corrosion control, as compared with all volatile treatment of ammonia. The pressurized water reactor systems have switched a secondary side pH control agent to minimize the corrosion in the moisture separator/reheater and feedwater heater systems and the transport of corrosion products into steam generator. As results of field test, pH was increased in the steam generator and the wet steam area of moisture separator/reheater and the concentration of Fe were decreased by more than 50% as compared with water treatment of ammonia.

• Composites Research
• /
• v.28 no.5
• /
• pp.265-269
• /
• 2015

Development of simple and efficient method for large-scale production of mechanically strong and electrically conductive graphene fiber is highly desirable for practical applications, such as fiber-reinforced composites, wearable electronics, and electromagnetic irradiation shielding. Here, we present a facile approach for the preparation of amine-functionalized graphene fibers by simple wet-spinning of diamine-functionalized graphene oxide (GO-$NH_2$), which is used because of its synthetic convenience, good dispersity, and scalable production with low cost. The amine-functionalized graphene fiber shows high electrical and mechanical properties compared to pristine graphene oxide fiber due to the electrostatic interaction between amine groups and electronegative functional groups of graphene oxide.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.217-223
• /
• 2006

Ion exchange fibers, high functionalized onto hybrid polyolefine fiber's surface, were synthesized by $\gamma-ray$ mutual radiation. Degree of grafting (DG) of copolymer increased with increasing GMA monomer concentration and the maximum rate of DG was 355% at 50 GMA. The graft reaction occurred in polar solvent and DG was 190% maximum value in $1.0\times10^{-3}$ Mohr's salt and 0.1 M sulfuric acid, respectively. The amination for graft copolymers varied depending on amine reagents, and the reactivity for copolymers was highest for methylamine, and that of triethylamine lowest. It was shown that water uptake and ion exchange capacities increased with increase in the rate of amination while surface area decreased rapidly as proceeding for graft reaction and amination.

• Composites Research
• /
• v.17 no.6
• /
• pp.44-51
• /
• 2004

To determine the effect of numbers of nitrogen atom bonded at ethyl group included in main chain of linear amine curing agents of epoxy-cure systems on the thermal and mechanical properties, standard epoxy resin DGEBF was cured with DETA, TETA and TEPA in a stoichiometrically equivalent ratio. From this work, the effect of curing agents of the DGEBF/amine systems oil the thermal and mechanical properties was significantly influenced by numbers of nitrogen atom of curing agents. The results showed that heat of reaction increased, and maximum exothermic temperature decreased with the decrease of numbers of nitrogen atom. In case of cured systems, density and maximum conversion(%) had no relation to numbers of nitrogen atom, but flexural modulus and tensile modulus increased with the decrease of numbers of nitrogen atom in main chain. Thermal stability, shrinkage(%), Tg, tensile and flexural strength showed irregular tendency having nothing to do with numbers of nitrogem atom at a sight. This findings imply that the differences in the maximum conversion(%) about the chain length of curing agents affect the thermal and mechanical properties.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.416-426
• /
• 2023

In this study, hindered amine-grafted graphene oxide (HA-GO) with antioxidant properties was prepared and incorporated into Nafion-based composite membranes as an effective filler material for polymer electrolyte membrane fuel cell applications. HA-GO was synthesized via a ring-opening reaction between amine groups in 4-amino-2, 2, 6, 6-tetramethyl piperidine and epoxy groups on the surface of GO. Nafion-based composite membranes containing different weight contents of HA-GO were fabricated to compare the polymer electrolyte membrane properties with those of the pure Nafion membrane. The composite membranes with HA-GO were found to have better mechanical properties, chemical stability, and proton conductivity than the pure Nafion membrane. In particular, the conductivity retention behavior confirmed by the decrease in proton conductivity after Fenton's test of the composite membranes was better than that of the pure Nafion membrane due to the incorporation of HA-GO with effective antioxidant properties.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.177-182
• /
• 2006

In this work, we have prepared organophilic MMT having thermal stability by ion exchange reaction of various aromatic ammonium salts with MMT containing sodium ion. The organic modifiers having alkyl side chains and amine functional group were successfully synthesized by effectively introducing the surfaces of MMT via ion exchange reaction to form organophilic MMTs with a view to improve the reactivity and thermal stability. The WAXD patterns of organophilic MMT showed the more increased gallery spacing by $3.3{\AA}$ than that of the pristine MMT and also the onset of initial decomposition of organophilic MMT was $275^{\circ}C$ as determined by a thermogravimetric analysis. The polyimide (PI) nanocomposite films based on poly(amic acid) and organophilic MMT were prepared by a solution blending followed by cyclodehydration reaction. We have investigated the dispersity of organophilic MMTs in PI matrix by using WAXD and the effect of the organophilic MMT content on the mechanical properties of PI nanocomposite films was studied.

• Applied Chemistry for Engineering
• /
• v.23 no.3
• /
• pp.271-278
• /
• 2012

In this work, we have prepared the nanocomposite by the reaction of mica and zinc oxide, and investigated the application of nanocomposite to UV protecting creams. Mica treated with 3-aminopropyltrimethoxysilane (APTMS) reacted with 1,4-phenylenediisothiocyanate (PDC) to give -N=C=S functionalized surface, which was further reacted with zinc oxides coated with APTMS to give mica-zinc oxide nanocomposites. The composites were characterized by EA, EDS, TGA, SEM, zeta potential measurement, powder XRD, and DRS UV/Vis analyses. Finally, we measured transmittances of ultraviolet protection creams manufactured by using mica composite covered with zinc oxides in the range of 280~400 nm. The nanocomposites developed in this work might be applicable as inorganic hybrid materials for UV protecting creams.