• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.595-597
• /
• 2003

오프라인 필기체 숫자 인식에서 다양한 변형을 잘 흡수 할 수 있는 효율적인 특징을 찾는 것은 중요한 일이며, 본 논문에서는 이를 위해 다양한 단일특징들을 구현 하였으며, 단일 특징만으로는 만족 할 만한 성능을 기대하기 어렵기 때문에 다양한 단일 특징을 복합특징으로 구성하였다. 또한 오프라인 필기체 숫자인식에서 좋은 성능을 발휘하는 것으로 알려진 신경회로망으로 학습을 하였으며, 인식의 성능을 개선시키기 위해 효과적인 특징을 조합하여 하나의 단일 신경회로망들을 구성하고 그것을 다시 복합신경회로망으로 구성하여 성능을 실험 함으로서 성능의 향상을 볼 수 있었고, 신경회로망에 더하여 성능을 개선시키기 위해 신경회로망을 보완 할 수 있는 다수결 투표 방법을 사용하였다. 본 논문에서는 신경회로망의 인식 결과를 비교 분석하여 최적의 특징을 찾아 낸 결과를 2차 다수결 투표를 사용하여 인식하는 방법을 제안한다. 제안된 방식의 성능을 검증하기 위해서 Concorida 대학교의 CENPARIMI 숫자 데이터 베이스를 가지고 인식을 수행 하였으며. 그 결과 97.40%의 정인식률과 0.75%의 오인식률 그리고 1.85%의 거부률을 보였다.

• Composites Research
• /
• v.14 no.5
• /
• pp.26-37
• /
• 2001

After impact analysis of the composite cylindrical shells was performed. obtained outputs at 9 equally divided points of the shell were used as input patterns of the neural networks. Identification of impact loading characteristics was predicted simultaneously. Momentum backpropagation algorithm of neural networks which can modify the momentum coefficient and learning rate was developed and applied to identify the loading characteristics. Hidden layers of the backpropagation increased from 1 layer to 3 layers and trained the loading characteristics. Developed program with variable learning rate was converged close to real load characteristics under 1% error. Inverse engineering which identify the impact loading characteristics can be applicable to the composite laminated cylindrical shells with developed neural networks.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.137-146
• /
• 2002

The predictions of the loading characteristics was performed by the neural networks which use the results through structural analysis. The momentum backperpagtion which can be modified the teaming rate and momentum coefficient, was developed. Input patterns of the neural networks are the 9 strains which positioned at the side of the shell and output layers is the loading characteristics. Hidden layers were increased from 1 layers to 3 layers. Developed program which were trained by 9 strains predict the loading characteristics under 0.5%. Inverse engineering can be applicable to the composite laminated cylindrical shells with developed neural networks.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.6
• /
• pp.511-516
• /
• 2002

The neural networks may have problem such that the amount of calculation for the network learning goes too big according to the dimension of the dimension. To overcome this problem, the wavelet neural networks(WNN) which use the orthogonal basis function in the hidden node are proposed. One can compose wavelet functions as activation functions in the WNN by determining the scale and center of wavelet function. In this paper, when we compose the WNN using wavelet functions, we set a single scale function as a node function together. We intend that one scale function approximates the target function roughly, the other wavelet functions approximate it finely During the determination of the parameters, the wavelet functions can be determined by the global search for solutions suitable for the suggested problem using the genetic algorithm and finally, we use the back-propagation algorithm in the learning of the weights.

• Proceedings of the Optical Society of Korea Conference
• /
• 1995.06a
• /
• pp.117-120
• /
• 1995

분수차 퓨리에(Fouier) 변환은 퓨리에 면환을 일반화시킨 것으로, 위치와 공간주파수의 복합적인 표현을 주나, 한 개의 렌즈를 광학적 구현이 역시 가능하다. 광신호처리에서 많이 사용되는 정합 필터를 구성하는 퓨리에 면환을 각각 분수차로 일반화시킴으로서, 위치 필터와 공간주파수 필터의 특성이 복합된 새로운 필터를 구성할 수 있게 된다. 이 필터 구조는 신경회로망의 학습으로 대치된다. 최대경사법과 오차역전파(error back-propagation)에 기초한 학습 법칙이 유도되고, 컴퓨터 시뮬레이션 결과가 제시된다.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.1
• /
• pp.106-113
• /
• 2019

In this paper, we propose an algorithm to classify the received active pulse when the active sonar system is operated as a non-cooperative mode. The proposed algorithm uses CNN (Convolutional Neural Networks) which shows good performance in various fields. As an input of CNN, time frequency analysis data which performs STFT (Short Time Fourier Transform) of the received signal is used. The CNN used in this paper consists of two convolution and pulling layers. We designed a database based neural network and a pulse feature based neural network according to the output layer design. To verify the performance of the algorithm, the data of 3110 CW (Continuous Wave) pulses and LFM (Linear Frequency Modulated) pulses received from the actual ocean were processed to construct training data and test data. As a result of simulation, the database based neural network showed 99.9 % accuracy and the feature based neural network showed about 96 % accuracy when allowing 2 pixel error.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.1
• /
• pp.85-89
• /
• 2004

Robust control for feedback control system is needed according to the highest precision of industrial automation. However, when a neural network feedback control system has an effect of disturbance, it is very difficult to guarantee the robustness of control system. As a compensation method solving this problem, in this paper, hybrid control method of neural network controller and PID controller is presented. A neural network controller is operated as a main controller, a PID controller is a assistant controller which operates only when some undesirable phenomena occur, e.q., when the error hit the boundary of constraint set. The robust control function of neural network-PID hybrid controller is demonstrated by speed control of Motor.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.157-160
• /
• 2008

Multi-Spinner 장비는 반도체 제조공정과정 중 Photo공정에서 노광(Exposure)공정을 제외한 PR 형성공정 및 현상(Development)을 수행하는 복합적인 장비이다. 이 복합적인 Multi-Spinner 장비의 각 수행 과정에서는 웨이퍼를 이동 작업하는데 있어서 이동경로를 최적 스케줄링 한다면 반도체 생산량 향상에 크게 도움이 된다. Multi-Spinner 장비내의 각 공정과정들은 PR 형성공정 및 현상 공정 순서에 맞게 순차적으로 진행되며, 이 과정들을 위해 이송 로봇이 순차적으로 웨이퍼를 이동하며, 이 과정에서 일정의 대기시간이 발생하게 된다. 대기시간을 줄이기 위해 C/S 유닛에 담겨 있는 수십 장의 웨이퍼들을 다음 공정으로 이송 시 이동경로의 최적 스케줄링이 필요하다. 본 논문은 스케줄링 문제를 풀기 위해 인공 신경회로망(Artificial Neural Network)을 이용한 최적 스케줄링 방법을 제안한다.

• The Journal of the Korea Contents Association
• /
• v.1 no.1
• /
• pp.8-14
• /
• 2001

In this paper, we suggests a algorithms of recognizing the disease region by extracting particular organ from medical image. This method can extract liver region in spite of input image including many organs and charged format by using multi-threshold of feed-back-structure for segmentation liver region, and suggest the recognition of disease region in extracted liver, using multi-neural network structured by RBF and BP, overcoming the defect of single-neural network. The algorithm in this paper is proficient in adaptation for a multi form change of input medical image. This algorithm can be used at tole-medicine through automatic recognition after recognizing of the disease region by real-tire medical Image.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.6
• /
• pp.47-52
• /
• 2002

The wavelet functions are originated from scaling functions and can be used as activation function in the hidden node of the network by deciding two parameters such as scale and center. In this paper, we would like to propose the mixed structure. When we compose the WNN using wavelet functions, we propose to set a single scale function as a node function together. The properties of the proposed structure is that while one scale function approximates the target function roughly, the other wavelet functions approximate it finely. During the determination of the parameters, the wavelet functions can be determined by the global search algorithm such as genetic algorithm to be suitable for the suggested problem. Finally, we use the back-propagation algorithm in the learning of the weights.