• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.154-157
• /
• 2005

This paper aims to investigate the tow deformation pattern with respect to shear angle and mold property during draping of plain weave carbon/epoxy prepreg. Aluminum and PVC foams with different foam density are used for the draping hemisphere molds with 250 mm diameters. Microscopic observation reveals that tow parameters like crimp angle and Y-directional tow intervals are influenced by shear angle and mold density at the same time. The correlation between crimp angle and Y-directional tow interval is also found out.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.167-170
• /
• 2003

In this paper, the electromechanical displacements of curved actuators using laminated composites are calculated by finite element method to design the optimal configuration of curved actuators. To predict the pre-stress in the device due to the mismatch in coefficients of thermal expansion, the carbon-epoxy and glass- epoxy as well as PZT ceramic is also numerically modeled by using hexahedral solid elements. Because the modeling of these thin layers causes the numbers of degree of freedom to increase, large-scale structural analyses are performed in a cluster system in this study. The curved shape and pre-stress in the actuator are obtained by the cured curvature analysis. The displacement under the piezoelectric force by an applied voltage is also calculated to compare the performance of curved actuator. The thickness of composite is chosen as design factor.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.7
• /
• pp.181-188
• /
• 2000

The objective of this research is to develop an efficient reverse engineering method of 3-dimensional compound surfaces for raped prototyping process. As a first step, several image processing techniques were applied to the measured data obtained using laser scanner. And the boundary information of the compound surface were extracted to divide the surface into several separate regions. As a next step, the Delaunay triangulation method were applied to reconstruct the surface based on the measured data and the boundary information. Finally, the STL file were created for the rapid prototyping process. Required simulations and experiments were performed and the results were analyzed to show the effectiveness of the proposed methods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1365-1366
• /
• 2013

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.233-236
• /
• 2002

An efficient method was developed in this study to obtain optimal stacking sequences, thicknesses, and minimum weights of stiffened laminated composite shells under combined loading conditions and stiffener layouts using genetic algorithms (GAs) and finite element analyses. Among many parameters in designing composite laminates determining a optimal stacking sequence that may be formulated as an integer programming problem is a primary concern. Of many optimization algorithms, GAs are powerful methodology for the problem with discrete variables. In this paper the optimal stacking sequence was determined, which gives the maximum critical buckling load factor and the minimum weight as well. To solve this problem, both the finite element analysis by ABAQUS and the GA-based optimization procedure have been implemented together with an interface code. Throughout many parametric studies using this analysis tool, the influences of stiffener sizes and three different types of stiffener layouts on the stacking sequence changes were throughly investigated subjected to various combined loading conditions.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.469-473
• /
• 2003

Milling 가공시 공구와 피삭재의 접합명에서는 절삭가공의 잔유물인 burr가 생성되고, 이러한 Burr는 작업효율과 정밀도를 감소시키며 추처리과정 (Deburring)을 야기시키는 원인이 된다. 그러므로 정밀도와 작업효율을 극대화하기 위해서는 이러한 Burr의 생성원리를 파악함과 동시에 Exit Burr의 여부에 대한 판별을 하여 최적의 가공조건을 맞추어 주어야 하는데, 이러한 경우에 지금까지는 점, 선 및 원으로 피삭재의 형상을 재현하여 공구의 경로와의 Exit 각을 통해 결과를 예측하는 연구를 해왔었다. 본 논문에서 추구하고자 하는 핵심은 이러한 피삭재의 형상을 재현하기 위해 지금까지 사용해왔던 요소를 보다 다양화시키는 방안을 제시하여 프로그램의 적용 범위를 넓히려는 것이다. 예컨대 이제까지 실제 가공에서 사용되고 있는 임의형상에 대한 표현 방식 중에서 대다수 CAD 프로그램에서 곡선 및 곡면을 표현하는 경우, B-Spline Curve의 알고리즘은 패삭재의 불규칙적인 곡면을 가장 근사하게 표현하는 최적의 해결책으로 쓰여지고 있다. 그러므로 이러한 알고리즘을 통해 프로그램의 적용예를 넓히는 것은 보다 다양한 조건에서의 Burr생성에 대한 예측을 가능케 해주는 것이다. 본 논문에서는 앞에서 언급한 바와 같이 B-Spline Curve 알고리즘을 개발하고, 프로그램에 적용하는 일련의 과정을 통해 보다 다양한 형상의 피삭재에서 단일 혹은 복합경로의 공구가 지나갈 경우에 생길 수 있는 Burr를 얼마나 효율적으로 판별할 수 있는지를 소개하고자 한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.46-59
• /
• 1998

This paper presents shape design, surface construction, and cutting path generation for the surface of marine ship propeller blades. A propeller blade should be designed to satisfy performance constraints that include operational speed which impacts rotations per minutes, stresses related to deliverable horst power, and the major length of the marine ship which impacts the blade size and shape characteristics. Primary decision variables that affect efficiency in the design of a marine ship propeller blade are the blade diameter and the expanded area ratio. The blade design resulting from these performance constraints typically consists of sculptured surfaces requiring four or five axis contoured machining. In this approach a standard blade geometry description consisting of blade sections with offset nominal points recorded in an offset table is used. From this table the composite Bezier surface geometry of the blade is created. The control vertices of the Hazier surface patches are determined using a chord length fitting procedure from tile offset table data. Cutter contact points and path intervals are calculated to minimize travel distance and production time while maintaining a cusp height within tolerance limits. Long path intervals typically generate short tool paths at the expense of increased however cusp height. Likewise, a minimal tool path results in a shorter production time. Cutting errors including gouging and under-cut, which are common errors in machining sculptured surfaces, are also identified for both convex and concave surfaces. Propeller blade geometry is conducive to gouging. The result is a minimal error free cutting path for machining propeller blades for marine ships.

• Journal of Institute of Convergence Technology
• /
• v.10 no.1
• /
• pp.7-12
• /
• 2020

We describe a efficient surface reconstruction method that reconstructs a 3D manifold polygonal mesh approximately passing through a set of 3D oriented points. Our algorithm includes 3D convex hull, octree data structure, signed distance function (SDF), and marching cubes. The 3D convex hull provides us with a fast computation of SDF, octree structure allows us to compute a minimal distance for SDF, and marching cubes lead to iso-surface generation with SDF. Our approach gives us flexibility in the choice of the resolution of the reconstructed surface, and it also enables to use on low-level PCs with minimal peak memory usage. Experimenting with publicly available scan data shows that we can reconstruct a polygonal mesh from point cloud of sizes varying from 10,000 ~ 1,000,000 in about 1~60 seconds.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.18-27
• /
• 1997

Al 6061 alloy reinforced with 10 vol.% ${\delta}-Al_2O_3$ short fiber was fabricated by Rheo-compocasting and squwwze cating. Extrusion processings were performed at temperatures from 40$0^{\circ}C$ to 55$0^{\circ}C$ with various extrusion ratio for curved shape dies. In proportion to the increase of extrusion ratios and temperatures, ultimate tensile strength for extruded materials improved. SEM observation of fractured surfsce was capcble oof accounting for fracture mechanism and bounding state of fiber and matrix.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.287-292
• /
• 2002

This paper presents a reverse engineering method for compound surfaces using vision system. A CNC machining center is used as a measuring station, which is equipped with slit beam generator and vision probe. Since obtained data using slit beam or laser scanner may have much data loss along the edge of compound surfaces, an algorithm is presented in this study to recover missing geometric data at such region. First, b-spline interpolation is applied to extract edge information of the surface, and as a next step, b-spline approximation is applied to recover the missing geometric data. Finally, b-spline skinning method is applied to regenerate the surface information. Appropriate simulation and experimental works are preformed to very the effectiveness of the proposed methods.