• Journal of KIISE:Software and Applications
• /
• 제33권7호
• /
• pp.605-614
• /
• 2006

The success of a software development project can be determined by the use of QCD. And as a software's size and complexity increase, the importance of early quality assurance rises. Therefore, more effort should be given to prevention, as opposed to correction. In order to provide a framework for the prevention of defects, defect detection activities such as peer review and testing, along with analysis of previous defects, is required. This entails a systematization and use of quality data from previous development efforts. FMEA, which is utilized for system safety assurance, can be applied as a means of software defect prevention. SW-FMEA (Software Failure Mode Effect Analysis) attempts to prevent defects by predicting likely defects. Presently, it has been applied to requirement analysis and design. SW-FMEA utilizes measured data from development activities, and can be used for defect prevention on both the development and management sides, for example, in planning, analysis, design, peer reviews, testing, risk management, and so forth. This research discusses about related methodology and proposes defect prevention model based on SW-FMEA. Proposed model is extended SW-FMEA that focuses on system analysis and design. The model not only supports verification and validation effectively, but is useful for reducing defect detection.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제28권4B호
• /
• pp.323-338
• /
• 2003

The main memory database systems (MMDBMS) efficiently supports various database applications that require high performance since it employs main memory rather than disk as a primary storage. Recently, it has been increased needs that have the fast data processing as well as the efficient modeling of application requiring for a complicated structure, and conformity to applications that need the strict dta consistency. In MMDBMS, because all the data is located in the main memory, it can support the usable expression methods of data satisfying their needs without performance overhead. The method has the operation to manipulate the data and the constraint such as referential integrity in more detail. The data model consists of this methods is an essential component to decide the expression power of DBMS. In this paper, we discuss about various requests to provide the communication services and propose the data model that support it. The mainly discussed issues are 1) definition of the relationship between tables using the pointer, 2) navigation of the data using the relationship, 3) support of the referential integrity for pointer, 4) support of the uniform processing time for the join, 5) support of the object-oriented concepts, and 6) sharing of an index on multi-tables. We discuss the pointer-based data model that designed to include these issues to efficiently support complication environments.

• Journal of Korean Society of Environmental Engineers
• /
• 제35권2호
• /
• pp.101-108
• /
• 2013

Ara Canal is the first artificial canal in Korea that connects the Han River and the Yellow Sea. Due to mixture of waters with different salinity and water quality, complicated hydrodynamic and water quality distributions are expected to occur inside the canal. An integrated hydrodynamic and water quality modeling system was developed using the 3 dimensional hydrodynamic model, EFDC (Environmental Fluid Dynamics Code) and the water quality model WASP (Water Quality Analysis and Simulation Program). According to the modeling results, BOD, TN, TP and Chl-a concentrations inside the canal were lower at the West Gate side than the Han River side since influent concentrations of the West Gate side are significantly lower. Chemical stratification due to salinity difference were more evident at the West Gate side as vertical salinity difference were more pronounced in this area. On the other hand, Chl-a concentrations showed more pronounced vertical distribution at the Han River side as Chl-a concentrations were higher in this area. It was notable that Dissolved Oxygen concentrations can be lower than 2 mg/L occasionally in the middle part of the canal. While major factor affecting DO concentrations in the canal are inflows via both gates, the other important factor was found to be BOD decay in the canal due to extended hydraulic residence time. This study can be used to predict hydrodynamic conditions and water quality in the canal during the year and thus can be helpful in the development of gate operation method of the canal.

• Archives of design research
• /
• 제18권3호
• /
• pp.95-104
• /
• 2005

Although the volume and complexity of available information have increased, our ability to process such volume of complex information has not been met with corresponding development. Information designers have been given the responsibility to address such unbalanced progress by developing effective visual systems to deliver and communicate such information to the masses in a manner that is quick and easy to process and understand. This study originated in recognition of these issues. This study seeks to find a solution to these issues in rhetorics in order to proliferate visual communications in recognition of the increasing importance of information and visual communication. Rhetorics, a field of study with a long history of analyzing the delivery of communication, provides numerous possibilities for the re-establishment of importance placed on visual information communication. Included in this study are (i) a thorough analysis of the principals of expression and logic offered by rhetorics, as applicable to information design (ii) a proposal to the solution to the above-mentioned issues encompassing the rhetoric process and methods of expression of information design and (iii) the practical application of these design principals to social activities. In order to provide an example of the practical use of the rhetoric methodology Presented in this study, we applied the rhetoric methodology to the 'Information Design for Public Transportation of Seoul.' and developed a new map and a guidebook. The raw data necessary for the foregoing were obtained through the analysis of the information designs that are currently in use in connection with mass transportation in Seoul and the survey evaluation conducted among Seoul residents. We modulated the infrastructure of Seoul by using 48 TAZs, computed the routes that are most likely to be used, and proposed the predictable information analysis process. The design proposed on this study encompasses color coding and use of combined information, and application of style and sequential information analysis process.

• Journal of Broadcast Engineering
• /
• 제24권6호
• /
• pp.1085-1095
• /
• 2019

In this paper, we perform a subjective quality assessment on low-resolution surveillance videos, which are encoded with a very low target bit-rate to use in an ultra-low band transmission system and investigate the encoding effects on the perceived video quality. The test videos are collected based on their spatial and temporal characteristics which affect the perceived quality. H.265/HEVC encoder is used to prepare the impaired sequences for three target bit-rates 20, 45, and 65 kbps and subjective quality assessment is conducted to evaluate the quality from a viewing distance of 3H. The experimental results show that the quality of encoded videos, even at target bit-rate of 45 kbps can satisfy the users. Also we compare objective image/video quality assessment methods on the proposed dataset to measure their correlation with subjective scores. The experimental results show that the existing methods poorly performed, that indicates the need for a better quality assessment method.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• 제13권5호
• /
• pp.436-442
• /
• 2020

ESS(energy storage system) has recently become an important power source in various areas due to increased renewable energy resources. The more ESS is used, the less the effective capacity of the ESS. Therefore, it is important to manage the remaining useful lifetime(RUL). RUL can be checked regularly by inspectors, but it is common to be monitored and estimated by an automated monitoring system. The accurate state estimation is important to ESS operator for economical and efficient operation. RUL estimation model usually requires complex mathematical calculations consisting of cycle aging and calendar aging that are caused by the operation frequency and over time, respectively. A lightweight RUL estimation model is required to be embedded in low-performance processors that are installed on ESS. In this paper, a lightweight ESS RUL estimation model is proposed to operate on low-performance micro-processors. The simulation results show less than 1% errors compared to the original RUL model case. In addition, a performance analysis is conducted based on ATmega 328. The results show 76.8 to 78.3 % of computational time reduction.

• Journal of Intelligence and Information Systems
• /
• 제14권1호
• /
• pp.117-129
• /
• 2008

The cost-based scheduling work has been done in both the Operations Research (OR) and Artificial Intelligence (AI) literature. To deal with more realistic problems, AI-based heuristic scheduling approach with non-regular performance measures has been studied. However, there has been little research effort to develop a full inter-job cost propagation algorithm (CPA) for different jobs having multiple downstream and upstream activities. Without such a CPA, decision-making in scheduling heuristics relies upon local, incomplete cost information, resulting in poor schedule performance from the overall cost minimizing objective. For such a purpose, we need two types of CPAs : intra-job CPA and inter-job CPA. Whenever there is a change in cost information of an activity in a job in the process of scheduling, the intra-job CPA updates cost curves of other activities connected through temporal constraints within the same job. The inter-job CPA extends cost propagation into other jobs connected through precedence relationships. By utilizing the cost information provided by CPAs, we propose cost-based scheduling heuristics that attempt to minimize the total schedule cost. This paper develops inter-job CPAs that create and update cost curves of each activity in each search state, and propagate cost information throughout a whole network of temporal constraints. Also we propose various cost-based scheduling heuristics that attempt to minimize the total schedule cost by utilizing the cost propagation algorithm.

• Journal of Navigation and Port Research
• /
• 제39권6호
• /
• pp.457-463
• /
• 2015

A gas turbine engine plays an important role as a prime mover that is used in the marine transportation field as well as the space/aviation and power plant fields. However, it has a complicated structure and there is a time delay element in the combustion process. Therefore, an elaborate mathematical model needs to be developed to control a gas turbine engine. In this study, a modeling technique for a gas generator, a PLA actuator, and a metering valve, which are major components of a gas turbine engine, is explained. In addition, sub-models are obtained at several operating points in a steady state based on the trial running data of a gas turbine engine, and a method for controlling the engine speed is proposed by designing an NPID controller for each sub-model. The proposed NPID controller uses three kinds of gains that are implemented with a nonlinear function. The parameters of the NPID controller are tuned using real-coded genetic algorithms in terms of minimizing the objective function. The validity of the proposed method is examined by applying to a gas turbine engine and by conducting a simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제22권3호
• /
• pp.527-533
• /
• 2018

Recently, the device-to-device (D2D) communication has been conceived as the key technology for the next-generation mobile communication systems. The neighbor discovery in which the nearby users are found, is essential for the proper operation of the D2D communication. In this paper, we propose new neighbor discovery scheme based on deep learning technology which has gained a lot of attention recently. In the proposed scheme, the neighboring users can be found using the uplink pilot transmission of users only, unlike conventional neighbor discovery schemes in which direct pilot communication among users is required, such that the signaling overhead can be greatly reduced in our proposed scheme. Moreover, the neighbors with different proximity can also be classified accordingly which enables more accurate neighbor discovery compared to the conventional schemes. The performance of our proposed scheme is verified through the tensorflow-based computer simulations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제19권6호
• /
• pp.634-638
• /
• 2018

Haze is a factor that degrades the performance of various image processing algorithms, such as those for detection, tracking, and recognition using an electro-optical sensor. For robust operation of an electro-optical sensor-based unmanned system used outdoors, an algorithm capable of effectively removing haze is needed. As a haze removal method using a single electro-optical sensor, the dark channel prior using statistical properties of the electro-optical sensor is most widely known. Previous methods used a square filter in the process of obtaining a transmission using the dark channel prior. When a square filter is used, the effect of removing haze becomes smaller as the size of the filter becomes larger. When the size of the filter becomes excessively small, over-saturation occurs, and color information in the image is lost. Since the size of the filter greatly affects the performance of the algorithm, a relatively large filter is generally used, or a small filter is used so that no over-saturation occurs, depending on the image. In this paper, we propose an improved haze removal method using color image segmentation. The parameters of the color image segmentation are automatically set according to the information complexity of the image, and the over-saturation phenomenon does not occur by estimating the amount of transmission based on the parameters.