• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.1-6
• /
• 2002

This paper presents that photonic bandgap structures suppressing the propagation of surface waves can improve the performance of the patch antennas on a thick and high dielectric constant substrate. The forbidden propagation of surface wave due to the photonic bandgap enhances the radiation efficiency and reduces the back radiation drastically.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.55-58
• /
• 2004

To analysis on the degradation of the satellite communication signal due to Asian dust that was appeared on Korean peninsula during March and April 2004, EIRPs of L, S, C, Ku and Ka frequency band of the downlink of satellite communication link were measured by Satellite Signal Monitoring Center located in lcheon, Korea. The measured results were compared to the measurement values of PM10 and OPC that were measured by the Korea Meteorological Administration.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.193-198
• /
• 2001

접지된 유전체슬랩 위에 주기적으로 스트립이 놓여있는 격자구조에 대한 전자파 산란현상을 반사격자(reflection grating) 관점과 누설파안테나(leaky wave antenna) 관점에서 조사하였다. 수치해석 결과로 입사파의 편파에 무관한 Bragg blazing 현실과 동시에 Bragg 및 off-Bragg blazing 현상이 확인되는 경우를 조사하였으며 그 특성(복소전파상수, 복사패턴, 산란특성)에 대하여 논의하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.993-997
• /
• 1997

The continuous chip depresses the accuracy of workpieces and promotes the wear of machine tools and hunts operators. So chip control os a major problem in turning process. In this paper, a method of chip identification is develope by pyrometer. The identifier is applied in real-time control of chip pattern with adjusting feedrate.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10a
• /
• pp.367-369
• /
• 2001

논리 회로는 하드웨어로 직접 구현할 수도 있으나, 설계된 디지털 논리를 프로그램으로 구현하고 이를 내장형 프로세서가 실행하게 하는 방식으로 구현할 수 있다. 이러한 구현은 내장형 시스템에 적합하도록 코드 크기와 실행 속도가 효율적이어야 한다. 본 논문에서는 복사 전파, 데드코드 삭제, 위상 정렬등의 컴파일러 최적화 기술과 함수 단위 모듈 개념을 도입하여 신호 흐름 분석 기법의 C 코드 자동 발생기를 구현하였다. 회로 시뮬레이션 구현 기법 중 유한 상태 천이 모델 기법으로 코드를 발생하는 Esterel 시스템과 성능 비교 실험을 한 결과, 코드 크기는 평균 84.17%로 감소되었으며 실행 속도는 평균 4.68배로 향상되었다.

• Fire Science and Engineering
• /
• v.34 no.4
• /
• pp.7-12
• /
• 2020

A numerical study was conducted to investigate the effects of the spray characteristics of water mist on the attenuation of thermal radiation. The attenuation process of the thermal radiation, generated from a hot surface panel, passing through the water mist was calculated via Fire Dynamics Simulator (FDS), and the effects of the flow rate, droplet mean diameter, and spray injecting angle of the water mist were analyzed. The results indicated that the increase in flowrate and decrease in droplet size led to an increase in the attenuation of thermal radiation. As the thermal radiation passed through the spray droplets, the effect of the spatial distribution of spray droplets was verified by calculating the thermal radiation attenuation at different spray injecting angles. The results indicated that the radiation attenuation increases as the spray angle increases. This implies that a wider distribution of spray droplets, irrespective of the droplet size and flowrate, increases the attenuation effect on thermal radiation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.8
• /
• pp.1040-1047
• /
• 1999

The characteristics of flame propagation in inert particle-laden $H_2$/Air premixed gas are numerically investigated on this study. The 2nd order TVD scheme is applied to numerical analysis of governing equations and multi-step chemical reaction model and detailed transport properties are sued to solve chemical reaction terms. Radiation heat transfer is computed by applying the finite volume method to a radiative transfer equation. The burning velocities against the mole fractions of hydrogen agree well with results performed by different workers. The inert particles play significant roles in the flame propagation on account of momentum and heat transfer between gas and particles. Gas temperature, pressure and flame propagation speed are decreased as the loading ratio of particle is increased. Also the products behind flame zone contain lots of water vapor whose absorption coefficient is much larger than that of unburned gas. Thus, the radiation effect of gas and particles must be considered simultaneously for the flame propagation in a mixture of $H_2$/Air and inert particles. As a result, it is founded that because the water vapor emits much radiation and this emitted radiation is released at boundaries as radiant heat loss as well as reabsorbed by gas and particles, flame propagation speed and flame structure are altered with radiation effect.

• Fire Science and Engineering
• /
• v.22 no.2
• /
• pp.30-37
• /
• 2008

We have performed the inflammability test for various flooring materials through a radiant heat panel tester by using the specification KSISO 9239-1 (an examination method of flooring materials) that has been set as an international standard for the fire prevention means of interior flooring materials. We have measured the flame spread distance, critical heat flux and smoke density generated by the fire of various flooring materials while using the radiant heat panel tester. The measurement result has shown the burning characteristics different from each other by the respective flooring materials and we could see that the surface materials and construction elements influence greatly on the heat release and smoke generation. We could see that the evaluation method above is an important test method in evaluating the critical heat flux, smoke generation and flame spread distance that are Important factors in studying for fire risks and it is judged that setting and applying a fire evaluation method of flooring materials suitable for the domestic construction use would be relevant.

• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.843-850
• /
• 2003

Script viruses are easy to make a variation because they can be built easily and be spread in text format. Thus signature-based method has a limitation in detecting script viruses. In a consequence, many researches suggest simple heuristic methods, but high false-positive error is always being an obstacle. In order to overcome this problem, our previous study concentrated on analyzing data flow of codes and has low-false positive error, but still could not detect a polymorphic virus because polymorphic virus loads self body and changes it before make a descendent. We suggest a heuristic detection method which expands the detection range of previous method to include polymorphic script viruses. Expanded data flow analysis heuristic has an expanded grammar to detect Polymorphic copy Propagation. Finally, we will show the experimental result for the effectiveness of suggested method.

• Korean Journal of Optics and Photonics
• /
• v.20 no.5
• /
• pp.294-300
• /
• 2009

To improve the output power of a photomixer as a THz source, we propose a four-leaf clover-shaped antenna structure which is composed of a highly resonant radiation element and a stable DC feed element. The resonance characteristics of the proposed structure were investigated on a half-infinite substrate first as a simplified radiation environment in order to save the computation time. Based on the antenna characteristics on a half-infinite substrate, the antenna structure was designed to have a maximum total efficiency and a maximum directivity on an extended hemispherical lens. In comparison with a full-wavelength dipole, an input resistance of this structure increased six fold and this characteristic significantly improved the mismatch efficiency between a photomixer and an antenna. THz output power from this structure is expected to increase by 2.7 times as compared to a full-wavelength dipole case.