• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.662-666
• /
• 2006

Korea Institute of Science and Technology Information (KISTI) is the national information center that has collected, analyzed and managed Science and Technology information resources comprehensively since 1962. KISTI has conducted several researches and made "KISTI Information Resources Development Policy" in order to select overseas S&T core journals. This paper aims to develop overseas S&T core journals that have not distributed in the country as the part of this effort. This paper analyses the documents requested to KISTI and delivered from overseas information centers for the last 6 years. This paper selects overseas S&T core journals based on the domestic request through conducting journal usage analysis, citation analysis, and cost effectiveness analysis.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1406-1407
• /
• 2011

태양광발전은 태양의 복사에너지를 직접 전기에너지로 변환하는 시스템으로 가동부분이나 열기관이 없어 수명이 길고 운전과 유지보수가 용이하며 모듈로 구성되기 때문에 수요나 지형에 맞게 설계할 수 있다. 이러한 특성으로 인해 태양광 발전은 차세대 성장 에너지원으로 각광 받고 있으며, 최근 문제되고 있는 지구환경문제 해결에도 부합할 수 있는 잠재력을 갖고 있다. 또한 계통 연계형 태양광 발전시스템의 확대 보급시 태양광 발전시스템의 출력특성에 의한 기존 전력계통의 피크전력을 감소시키는 효과도 기대할 수 있다. 국내 태양광발전은 정부 지원정책에 힘입어 지속적으로 보급이 확대되고 있으며, 2009년도 기준으로 약 400 MWp 이상의 설비가 전력시장에 진입하여 상업 운전중에 있다. 태양광발전시스템은 육상에 설치하는 것이 주류를 이루고 있었으나 태양광 입지조건에 적합한 부지를 확보하는 것이 쉽지않기 때문에 최근에는 건물옥상이나 벽에 설치하는 사례가 증가되고 있다. 본 논문에서는 한전전력연구원(대전시 유성구 문지동)의 건물옥상에 설치되어 운전하고 있는 9.52kW급 BIPV 형식의 태양광발전시스템을 대상으로 2010년도 1년간의 운전특성에 대하여 분석 평가하고 이를 통해 BIPV시스템의 운전에 대한 기초자료를 제시하고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.8
• /
• pp.69-76
• /
• 2003

For stable combustion and safety of a structure of the propulsion system, a cooling system to the liquid rocket engine should be incorporated. In this study, Eulerian-Lagrangian scheme for two phase combustion, nongray radiation and soot formation effect, and film-wall interaction have been introduced to study the effect of film cooling. After briefly introducing the governing equation, combustion characteristics with change of wall temperature has been investigated by varying such parameters as fuel mass fraction for film cooling, diameter of the fuel droplet, overall mixture fraction of oxygen to fuel. Also, radiative heat flux is compared with the conductive one at the combustor wall.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.867-868
• /
• 2011

Transient Analysis on heat transfer of rocket engine combustion chamber and wall temperature variation was carried out, especially, calculations of LOx/kerosene rocket engine with/without fuel film-cooling were conducted. Convective and radiative heat flux inside combustion chamber wall were calculated by the empirical equations for rocket engine combustion, and conduction of wall interior was calculated by numerical method with 2D axisymmetric grid. In this calculations the transient variations of wall temperature, the location changes of peak temperature and so on affected by film-cooling were analyzed.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.2
• /
• pp.159-171
• /
• 2012

Aerosol direct radiative forcing (ADRF) retrieval method was developed by combining data from passive and active satellite sensors. Aerosol optical thickness (AOT) retrieved form the Moderate Resolution Imaging Spectroradiometer (MODIS) as a passive visible sensor and aerosol vertical profile from to the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) as an active laser sensor were investigated an application possibility. Especially, space-born Light Detection and Ranging (Lidar) observation provides a specific knowledge of the optical properties of atmospheric aerosols with spatial, temporal, vertical, and spectral resolutions. On the basis of extensive radiative transfer modeling, it is demonstrated that the use of the aerosol vertical profiles is sensitive to the estimation of ADRF. Throughout the investigation of relationship between aerosol height and ADRF, mean change rates of ADRF per increasing of 1 km aerosol height are smaller at surface than top-of-atmosphere (TOA). As a case study, satellite data for the Asian dust day of March 31, 2007 were used to estimate ADRF. Resulting ADRF values were compared with those retrieved independently from MODIS only data. The absolute difference values are 1.27% at surface level and 4.73% at top of atmosphere (TOA).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.259-263
• /
• 2008

최근 기후변화로 인해 집중호우, 태풍, 폭설 등 악기상 발생이 빈번해지고 있으며, 특히 태풍은 단일 기상현상 가운데 가장 강력하며, 태풍으로 인하여 집중호우 폭풍 및 해일 등 부차적 악기상이 함께 발생하여 인명 및 경제 사회적인 피해 또한 막대하지만, 태풍으로 인한 강수량 측정은 다른 현상에 비해 정확한 측정이 어렵다. 이것은 태풍이 발생에서 소멸까지 일생의 대부분을 해상에서 보내, 육상 관측으로는 정확한 강수량 측정이 어렵기 때문이다. 그러나 위성자료를 활용하면 해상에서의 태풍 구름에 의한 강수분포를 추정할 수 있으며, 특히 구름을 투과하여 아래 내부구조 파악이 가능한 마이크로파 영역의 적외복사에너지를 이용하면 좀더 정확한 강수량 자료를 얻을 수 있을 것이다. 그러나 관측영역 확대를 위해서는 가능한 마이크로파위성자료를 합성처리하여 활용하는 것이 효과를 얻을 수 있을 것이다. 본 연구에서는 현재 기상청에서 수신하고 있는 Aqua/AMSR-E, SSM/I, TMI, QuilSCAT 등에서 산출되는 강수량을 상호 검증기법을 이용하여 합성처리 하였다. 위성자료마다 정확도와 해상도가 다른 것에 대해서는 높은 정확도에 가중치를 주고, 고해상도 자료에 맞추어 픽셀 크기를 맞추었다. 사용한 자료는 2005년$\sim$2007년 간 발생한 태풍 중에서 우리나라에 영향을 준 나비, 나리, 에위니아 등 3개 사례이며, 검증은 자동관측자료(AWS : Automatic Weather Station)자료와 일본 AWS자료(AMEDAS : Automatic Measurement Data Aquisition System) 및 미해군 연구소 발표자료를 이용하여, 시계열오차 분석 및 산포도를 분석하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1669-1676
• /
• 1993

In this paper, a thin-straight monopole antenna attached to a conducting box is analyzed using a moment method with the pocklington integral expression for the exact Green's function. A modeling of a conducting box is based on a Wire-Grid method for an efficient calculation procedure. A system of linear equation is obtained using the piecewise sinusoidal basis function. And a Junction basis function is enforcing to represent the physical current on the edge of the conducting box. Especially, the junction basis functions are overlapped for the current continuity preserving on the vertexes. Numerical results are obtained for the current distribution on the unified antenna/conducting box system, input impedance and radiation pattern. The results are compared with the known data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.426-433
• /
• 2014

The high-altitude electromagnetic pulse(HEMP) generated by a high-altitude nuclear explosion. This paper presents the comparison of electric field penetration in Bell laboratories and IEC 61000-2-9 standard when HEMP source penetrates through Naval Warship conducted coupling path and radiated coupling path. Also we analyze the effects of two kinds of coupling and propose Protective measures. Simulation results confirm IEC 61000-2-9 standard is more strict than the Bell Laboratories standard except for a lower frequency band, so we proposed IEC 61000-2-9 standard as a Naval HEMP standard. Finally, we offer the protective measures such as the shielding coating, Honeycomb ventilation, TVS in order to meet the military criteria.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.11
• /
• pp.832-840
• /
• 2008

Ablation occurs at irradiance beyond $10^9\;W/cm^2$ with nanosecond and short laser pulses focused onto any materials. Phenomenologically, the surface temperature is instantaneously heated past its vaporization temperature. Before the surface layer is able to vaporize, underlying material will reach its vaporization temperature. Temperature and pressure of the underlying material are raised beyond their critical values, causing the surface to explode. The pressure over the irradiated surface from the recoil of vaporized material can be as high as $10^5\;MPa$. The interaction of high power nanosecond laser with a thin metal in air has been investigated. The nanosecond pulse laser beam in atmosphere generates intensive explosions of the materials. The explosive ejection of materials make the surrounding gas compressed, which form a shock wave that travels at several thousand meters per second. To understand the laser ablation mechanism including the heating and ionization of the metal after lasing, the temporal evolution of shock waves is captured on an ICCD camera through laser flash shadowgraphy. The expansion of shock wave in atmosphere was found to agree with the Sedov's self-similar spherical blast wave solution.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.1
• /
• pp.26-31
• /
• 2014

This study looks into changing building energy use by application of phase change material (PCM). PCM does not need extra energy for operation and is used for reducing building energy use and, CO2 output by displaying semi-permanent effects after installation. It also is able to avoid the maximum electric power time-zone by inducing a time lag phenomenon of cooling and heating loads with high thermal capacity using latent heat. To verify the efficiency of blinds and PCM, tests about the PCM operation mechanism using air conditioning machinery and nocturnal panel cooling were done. In the test results of the case using PCM installation, a $45^{\circ}$ blind angle with machinery air conditioning and nocturnal panel cooling at the same time shows a 22 percent energy saving effect against general space. The test results of each case were compared and analyzed based on the blind and window opening settings. Finally, the energy reduction of existing buildings using PCM application was reviewed based on the final measurement results.