• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1057-1066
• /
• 2001

This paper describes a design for linear polarization antenna using the EMCD (electromagnetically coupled dipole). The analysis and the design of model antennas are conducted by FDTD method. Vertical and horizontal linear polarizations are easily obtained by variation of dipole position. In 1-element antenna design, mutual coupling between microstrip feed line and radiator is considered. Design parameters of each 1-element antenna with vertical and horizontal polarization are used for array design. Radiation power and main beam tilting angle can be controlled by the offset and the distance between radiating elements in an array, respectively. 5-element array antennas are fabricated and measured to prove the design validity. The results of FDTD simulation and measurement show the reasonable agreement.

• Fire Science and Engineering
• /
• v.8 no.1
• /
• pp.9-20
• /
• 1994

To understand the phenomena of laminar diffusion flame along vortical walt, the numerical analysis has been performed. Keller-box method was used to solve the problem in the boundary layer. The governing equation is simplified by thin-flame approxiamtion. And energy and chemical species equations are normalized with Schvab-Zeldovich variables. A physical domain is divided the boundary layer along streamwise coordinate as the combustion region and the propagation region. And Radiation model is concerned in these region. As a result, typical phenomena have been observed. Comparison of the numerical results with experimental data shows that the present method can successfully predict phenomena of laminar diffusion flame along upright surface.

• Journal of Korea Multimedia Society
• /
• v.10 no.5
• /
• pp.687-697
• /
• 2007

Although the Java bytecode has numerous advantages, there are also shortcomings such as slow execution speed and difficulty in analysis. Therefore, in order for the Java class file to be effectively executed under the execution environment such as the network, it is necessary to convert it into optimized code. We implemented CTOC for transforming to optimized code. In Optimization, SSA Form that distinguish variable by assignment is used to determine value and type statically. Copy propagation, dead code elimination optimization is applied to SSA Form. However, existing SSA Form is related to variable than expression. Therefore, in this paper, to performing optimization to SSA Form expression, after performing copy propagation and dead code elimination, in addition to that, partial redundant expression elimination is performed

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.1
• /
• pp.9-23
• /
• 1999

병렬 그래프 감축 모델에 있어서 투기적 연산(speculative evaluation)모델은 병렬성을 증가시키지만 불필요한 연산으로 인해 자원을 낭비할 수 있다. 투기적 태스크가 람다 연산식을 WHNF(Weak Head Normal Form)로 감축할 때, 대치과정은 그래프를 증가시킬 수 있고, 많은 복사과정을 요구할 수 있다. 이러한 투기적 태스크는 나중에 불필요한 연산이 될 수있고 이 경우 이러한 투기적 태스크에서 발생한 다른 모든 투기적 태스크들을 종료해야 하는 부담이 있다. 또한 불필요하게 된 복사과정으로 인한 기억 공간을 재사용이 가능한 상태로 만들어 주어야 한다. 본 논문은 WHNF 또는 HNF 로 감축할 대 발생할수 있는 불필요한 대치과정으로 인한 오버헤드를 줄이기 위해 대치과정이 지연된 람다 연산식 형태 (DSF : Deferred Substitution Form)를 제안한다. 이 형태는 대치과정을 필수적 태스크(mandatory task)가 수행될 때 까지 지연시키기 위한 람다 연산식 형태이다. 대치과정이 지연된 람다 연산식 형태로의 감축을 수행하는 투기적 태스크에서 , 대치과정이 존재하지 않기 때문에 그래프의 크기가 증가하지 않고 또한 복사과정을 요구하지 않는다. 따라서 연산식에 대한 대치과정이 지연된 람다 연산식 형태로의 감축이 불필요하게 된 경우 부담이 줄어들게 된다. 아울러 병렬성을 증가시키기 위한 연산모델을 제안한다.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.10
• /
• pp.125-133
• /
• 2020

In this paper, we design 4-layer TCP/IP that utilizes minimal memory and processor resources in Internet of Things(IoT) systems. The TCP/IP designed in this paper has the following characteristics. First, memory resource is minimized by using minimal memory allocation. Second, processor resource is minimized by using minimal memory copy. Third, the execution time of the TCP/IP can be completed in a deterministic time. Fourth, there is no memory leak problem. The standard in minimal resources for memory and processor derived in this paper can be used to check whether the network subsystems of the already implemented IoT systems are efficiently implemented. As the result of measuring the amount of memory allocation and copy of the network subsystem of Zephyr, an open source IoT kernel recently released by the Linux Foundation, we found that it was bigger than the standard in minimal resources derived in this paper. The network subsystem of Zephyr was improved according to the design proposed in this paper, confirming that the amount of memory allocation and copy were decreased by about 39% and 67%, respectively, and the execution time was also reduced by about 28%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.835-840
• /
• 2020

In this paper, we described the verification results on method by using the computer simulation and practical experiment for reduction of total radiated power (TRP) measurement time consuming tens of hours. TRP measurements are used in the 5G band in order to exactly evaluate the wireless communication equipment, but it takes a long measurement time because of dense sampling interval. Moreover, if there are various beam forming scenarios, the total measurement time increases exponentially. Therefore, the world-wide research on reduction method of the TRP measurement time is intensively on going. The verified method in this paper is to calculate the TRP through effective isotropical radiated power (EIRP). At first, the relation of TRP and EIRP was investigated, and an antenna for testing was designed and constructed. And, the amount of error was analyzed through simulation and measurement. The analysed results showed that the derived TRP through EIRP has very small error. This method could be applied for TRP measurements of 5G wireless communication equipments.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.6
• /
• pp.594-598
• /
• 2008

In this paper we propose a fast booting technique based on Improved snapshot boot in embedded Linux, widely adopted in personal devices such as PDA and mobile phones. The existing Snapshot boot technique tries to create a snapshot image at the time of suspend, and later load the entire snapshot image into the system memory at the predefined location with the help of a bootloader at the time of resume. Since a bootloader has to copy the entire snapshot image into the predefined memory to resume the previous suspended computing state, a little bit long time is required to resume. Improved snapshot boot does not create a snapshot image consisting of whole memory pages at the time of suspend, thus resulting in smaller snapshot image than the existing snapshot boot. The remaining pages are in the swap area. The resulting smaller sized snapshot image enables much faster booting latency. Through the experiment, we can see the booting latency is reduced almost 30% with suspend image of 2982 pages. This result depends on the amount of swap-out pages.

• Fire Science and Engineering
• /
• v.33 no.3
• /
• pp.29-36
• /
• 2019

The combustion properties required for fire simulations of multi-layer, multi-component flame retardant cables were measured using a cone calorimeter. The CO and soot yields combustion efficiencies of the flame retardant cables were investigated. TFR-8 (flame retardant PCV and XLPE added), TFR-CVV-SB (flame retardant PCV and general PVC), and VCTF, which are excellent in the flame retardancy of cables, were considered. As the main result, the CO yield (y_CO) of the TFR-8 and TFR-CVV-SB flame retardant cables increased by 23% and 16%, respectively, with increasing incident radiation heat flux from 25 kW/㎡ to 50 kW/㎡. On the other hand, the CO yield of VCTF was not influenced significantly by the changes in radiant heat flux. Finally, the soot yield and combustion efficiency increased as the sheath material (flame retardant performance) was strengthened. Therefore, in a fire environment where various heat fluxes coexist, attention should be paid to the top of the application of the combustion property of the flame retardant cable.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.12 s.115
• /
• pp.1189-1198
• /
• 2006

We analyze the radiated emission and mutual coupling problem from a single microstrip transmission line and double signal traces with various ground patterns. In this paper, it is shown that the reduction of the radiated emission from the signal traces can be accomplished by using the novel and compact patterns on the ground planes in a specific frequency band. The accuracy and validation of radiation mechanism from the transmission line on a novel ground plane are evaluated and explained by using a commercially available software and experiment, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1622-1630
• /
• 2015

In this study, we used EBG(electromagnetic band gap) reflector to change bi-directional radiation of circular polarization into uni-directional radiation of equiangular spiral antenna. When the height of spiral arm from EBG reflector is 0.07 wavelength of the lowest operating frequency, the axial ratio of the circular polarization was deteriorated. In this paper, we analyzed the magnitude and the time phase difference of $E_{\theta},E_{\phi}$ that generates right hand circle polarization that is co-polarization at +z direction and proposed the improving condition for axial ratio at all related frequency range. As a result, we obtained that the axial ratio was below 3[dB] at range of 3 ~ 10[dB], the gain was improved about 3[dB] with comparison to bi-directional radiation at free space, and $S_{11}$ was below -10[dB] at all related frequency range.